873 Commits

Author	SHA1	Message	Date
enricobuehler	833f3348a0	feat(store): console plugin store, index repo, and the fixes on-glass found ... Console: a Plugins section (Browse / Installed / Sources) on a static nav entry, with install friction proportional to trust — a plain confirm for a verified entry, a warning naming the curator for an external one, and a danger dialog that makes you retype the spec for a raw package. Tier badges are permanent and follow the plugin onto its own UI page. Index: unom/punktfunk-plugin-index published and served from Gitea's raw endpoint (real HTTPS, byte-exact, no vhost to stand up) — merge to main is publish, which resolves the design's open hosting question. Four things only running it could find: - runner discovery matched @punktfunk/plugin-* only, so a third-party scoped plugin (which D8 requires) would install and never run - ...and that convention also matches @punktfunk/plugin-kit, a plugin's own framework: it listed as installed and would have been imported as a unit. Both now key off the plugins dir's top-level dependencies, with an emptied dependency list meaning 'nothing installed' rather than falling back to the naming convention - the store must not pass new flags to the runner: the scripting package ships separately and an older one reads an unknown flag's value as a package name. The host writes the bunfig scope mapping itself - ureq reports only >= 400 as Err, so a conditional request's 304 arrives as Ok with an empty body — handled as an error it made every refresh after the first verify a signature over zero bytes and sit stale Also: the console's first Tabs use exposed an @unom/ui theme gap that rendered inactive tabs invisible (caught in a browser pass, not by types). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 20:48:02 +02:00
enricobuehler	45c3b96907	feat(store): plugin store host module — signed catalogs, tiered trust, install jobs ... The index is the verification gate: a catalog entry pins one exact version plus that version's tarball integrity hash, so 'verified on every release' is a property of the data rather than a promise about process. Nothing can express 'track latest' for a catalogued plugin. - store/index.rs signed index parse + ed25519 verify (ring), validate-and-drop per entry, semver minHost/advisory ranges - store/sources.rs built-in unom source (compiled-in URL + two key slots for rotation) + operator sources in plugin-sources.json - store/catalog.rs https fetch with size/timeout/redirect caps, signature before parse, last-good disk cache (stale-but-usable when offline) - store/jobs.rs single-flight install/uninstall: registry-integrity preflight against the pin, spawn the runner CLI with live log capture, post-install version check with rollback, provenance record, runner restart (discovery is startup-only) - store/manifest.rs install provenance; absence means CLI-installed - mgmt/store.rs 12 routes under /api/v1/store, denied to the plugin token (a plugin that can install plugins is an escalation primitive) Also generalizes runner discovery and listInstalled from @punktfunk/plugin-* to ANY scope's plugin-*: catalog entries must be scoped so the scope can map to that entry's registry, so a third-party plugin necessarily arrives under its own scope and would otherwise install but never run. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 20:48:02 +02:00
enricobuehler	96e19986bc	feat(encode): RGB-direct padded-copy — unaligned modes (1080p) get the EFC path safely ... Lifts 3aacec53's alignment gate into a mode select: an aligned mode keeps the true zero-copy direct import; an unaligned one (1080p!) now blits the visible frame into a per-slot ALIGNED BGRA staging image and duplicates the edge rows/columns into the 64x16 padding — transfer-only regions in one vkCmdCopyImage (1080p: visible + 8 row regions; width padding adds a second self-copy pass in GENERAL), no compute shader. The encode reads the staging image, never the capture buffer, so the EFC can never read past a producer allocation (the field GPU hang). Still one ~8 MB copy vs the CSC path's ~17 MB + dispatch + plane copies. Verdict line: active(padded-copy). The staging import drops the video profile entirely (TRANSFER_SRC only). CPU-payload paths made honest on the way (they were the smoke baseline AND the software-capture fallback): - rgb mode: the staging upload is padded CPU-side (edge duplication) so the aligned encode-src is fully defined; - CSC mode: the sampled image is now SOURCE-sized with a matching copy extent — the old aligned-size image + tightly-packed buffer sheared rows and left garbage rows at unaligned modes (black-bar artifacts; YMIN=16 in every smoke frame), which also masked as a 24 dB PSNR 'regression' against the (correct) padded output. On-glass (780M, host Mesa 26.0.4): all four smokes pass at 256x256 (direct) AND 250x250 (padded); padded-EFC frames decode perfectly uniform (YMIN==YMAX) at the exact 709-narrow values (79/148/60 for the first three fills); CSC-vs-padded PSNR 49.9 dB avg after the baseline fix. clippy clean. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-20 20:38:55 +02:00
enricobuehler	3aacec53d8	fix(encode): RGB-direct must not engage on unaligned modes — the EFC reads past the capture buffer (GPU hang) ... Field report (commit 25624443, RDNA2/VCN3 host, 1080p): repeated VCN0 VM protection faults from punktfunk-host, vcn_enc_0.0 ring timeouts, two ring resets, then a failed reset escalating to a full MODE1 GPU reset with VRAM loss. Root cause is B1's RGB-direct source: the session's coded extent is 64x16-aligned (1920x1088) but the captured dmabuf is only the real mode size (1920x1080) — the VCN EFC reads the 8 padding rows past the end of the buffer (8 x 7680 B = 61 KB, matching the faulting page span exactly). The CSC shader absorbs alignment by clamping reads and duplicating edges; RGB-direct has no such stage. Every prior validation surface happened to be aligned (256x256 smoke, 1440p live box) — 1080p is the common mode that is not. The stall watchdog's rebuild-and-refault loop then turned a per-session fault into the GPU death spiral. Two layers: - Open-time gate: RGB-direct engages only when the real mode equals the aligned coded extent (720p/1440p/4K yes, 1080p no); otherwise the CSC path runs and the verdict line says why (unaligned-mode). The padded- copy variant that re-enables 1080p is design-doc B2 work. - Submit-time check: an RGB-direct frame that does not cover the coded extent errors out (encoder-rebuild path) instead of importing an undersized source. On-glass (780M, host Mesa 26.0.4): all four smokes pass aligned; at PF_SMOKE_W/H=250 the gate refuses RGB-direct and the rgb smokes soft-skip. clippy clean. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-20 20:23:29 +02:00
enricobuehler	1262fec2ae	perf(zerocopy/vulkan): LN4 — global-priority VkBridge queue for the LINEAR/gamescope CSC ... The RGB→NV12 compute CSC shares the SMs with the game; request an elevated global-priority queue (VK_KHR/EXT_global_priority) so the driver can schedule it ahead. PUNKTFUNK_VK_QUEUE_PRIORITY = off|high|realtime (default realtime), downgrading REALTIME→HIGH→none on NOT_PERMITTED/INITIALIZATION_FAILED — a refused class never fails the bridge. Mirrors PyroWave's ac0e7332 (same honest caveat: WDDM didn't move; the Linux driver may — contended-tail lever, correct and harmless either way). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 20:12:42 +02:00
enricobuehler	ae67315804	perf(encode/nvenc-linux): LN3 — pipelined-retrieve escalation replaces the depth-1 async foot-gun ... PUNKTFUNK_NVENC_ASYNC gains a real tri-state: 1 = always (as before, now documented as ~+1 tick at depth-1), 0 = never (vetoes escalation), unset = ADAPTIVE — off until the session loop's cadence-overrun detector escalates. The host loop's adaptive-depth leaky bucket grows a second stage: once the capturer's depth is maxed (Linux portal is permanently depth-1), it asks the encoder for pipelined retrieve via the new Encoder::set_pipelined hook (asked exactly once; default impl declines, Windows untouched). nvenc_cuda engages at a safe point via a clean session rebuild WITHOUT the IO-stream binding: with input==output stream bound, later stream work waits on prior encode completions and would serialize a pipelined session — stream-ordered submit and two-thread retrieve are mutually exclusive. The ordered gate now also requires async_rt absence (belt-and-braces for the runtime switch). Re-open's first frame is the standard session IDR. On-hardware test: escalate mid-session → retrieve thread live, binding gone, all AUs deliver, first post-escalation AU is the IDR. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 20:10:24 +02:00
enricobuehler	256244430b	feat(encode): Vulkan Video B1 — RGB-direct encode source via VCN EFC (PUNKTFUNK_VULKAN_RGB_DIRECT=1) ... design/vulkan-rgb-direct-encode.md B1: when the probe passes AND PUNKTFUNK_VULKAN_RGB_DIRECT=1 (default OFF until the B2 on-glass A/B), the session opens with pictureFormat=B8G8R8A8 and the captured RGB frame becomes the encode source — the VCN EFC front-end does the 709-narrow CSC inline during encode. Deleted from the per-frame path: the compute CSC dispatch, both NV12 plane copies, the semaphore hop and one queue submit (dmabuf frames are ONE encode-queue submit; ~17 MB/frame of GPU traffic gone). The DPB stays NV12; RFI/RC/quality-level machinery is untouched. Shape: - probe_rgb_direct now returns the chroma-siting bits to create the session with (midpoint preferred, else cosited-even per axis); the open verdict line gains "active" / "available(off; ...)" states. - RgbProfileStack: the rgb-chained video profile rebuilt on the stack per profiled-image creation after open (profile identity is by value) — dmabuf imports become profiled VIDEO_ENCODE_SRC images (import cache unchanged), the CPU staging image likewise (concurrent encode+compute). - record_submit_rgb: steps 2–4 twin (dmabuf: single submit; CPU: staging copy on the compute queue, semaphore-ordered); shared step-1/bookkeeping. - begin_encode_cmd takes a SrcAcquire (CSC general / fresh-import FOREIGN QFOT / cached visibility-only / staging TRANSFER_DST) so both paths share the encode recording. - RGB-direct frames skip the CSC per-slot resources entirely (make_frame split into csc/common halves); cursor bitmaps warn once (EFC cannot composite; gamescope — the flagship — embeds the cursor itself). On-glass (780M RADV PHOENIX, host Mesa 26.0.4): all four smokes pass (vulkan_smoke{,_av1,_rgb,_rgb_av1}); the EFC-encoded H265 stream decodes clean and matches the CSC-encoded stream at 49.9 dB average PSNR (min 48.9) — within the design's ±1-code-value tolerance. (Raw-OBU ffmpeg probing of the tiny AV1 dumps fails identically for BOTH paths — pre-existing dump quirk, not a stream defect.) check+clippy+full unit suite green. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-20 20:05:56 +02:00
enricobuehler	5a27c02738	feat(encode/nvenc): LN1 phase-0 — slice-count + sub-frame-readback knobs and the slice-timing probe ... PUNKTFUNK_NVENC_SLICES=N (2..=32, default off) splits H.264/HEVC frames into N slices (sliceMode 3); PUNKTFUNK_NVENC_SUBFRAME=1 (default off) arms enableSubFrameWrite + reportSliceOffsets on sync sessions only. Both experimental groundwork for sub-frame slice output (plan §7 LN1). nvenc_cuda_subframe_slice_probe (on-hardware, ignored) answers the LN1 go/no-go: spins lock_bitstream(doNotWait) against an in-flight frame and prints the (t_us, status, numSlices, bytes) timeline — incremental slice availability and its spacing, or all-at-completion. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 19:44:54 +02:00
enricobuehler	d5a0f5012b	fix(encode): RGB-direct probe — accept cosited-even chroma siting (what VCN EFC actually offers) ... On-glass B0 result from the 780M (RADV PHOENIX, host Mesa 26.0.4): the probe returned no-709-narrow-midpoint because RADV advertises xChromaOffsets = COSITED_EVEN only — the VCN EFC does canonical H.26x left-cosited x-chroma, while the requirement was written to bit-match our 2x2-average (midpoint) shader. The delta is a half-pel chroma-x phase, imperceptible and unsignalled in our bitstream; EFC's siting is arguably the more correct one. Accept either siting bit per axis (model + range stay exact: 709 narrow); B1 will pass the preferred available bit. With this the 780M probes rgb_direct=available; both GPU smoke tests (H265 + AV1) pass on that box against host Mesa 26.0.4 — the first real-RADV validation of the poll fix, the quality-level control, and B0. (Container mesa alone can't run the H265 smoke: Fedora ships RADV with H264/H265 encode compiled out — AV1 only. Use the host ICD via VK_ICD_FILENAMES on Atomic boxes.) Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-20 19:44:33 +02:00
enricobuehler	34ec57cb52	test(encode/nvenc-linux): on-hardware assertion that stream-ordered submit arms ... Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 19:38:22 +02:00
enricobuehler	cd36c46388	perf(encode/nvenc-linux): LN2 v1 — stream-ordered submit via NvEncSetIOCudaStreams ... Bind the session's IO streams to the encode thread's high-priority copy stream: in sync-retrieve depth-1 use the per-frame input copy and cursor blend now enqueue with NO cuStreamSynchronize and encode_picture orders after them on the stream. Same stream both directions, so the encode's completion is inserted into the stream and later work (the next frame's copy into a reused ring slot) waits for it. Soundness gate: the fast path engages only when pending is empty (true depth-1 usage) — every prior encode was drained by a blocking poll, and the caller holds the frame payload across the matching poll (contract now documented on Encoder::submit; both host loops already comply). Pipelined callers and PUNKTFUNK_NVENC_ASYNC mode keep the blocking copies. True zero-copy input registration (registering the worker-owned IPC buffer directly) stays the LN2 v2 follow-up — it needs a contiguous worker-pool NV12 layout and a registration<->IPC-mapping lifetime tie. PUNKTFUNK_NVENC_STREAM_ORDERED=0 restores the old blocking behavior. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 19:38:22 +02:00
enricobuehler	59b6d3796b	perf(encode/nvenc-linux): LN0 — sampled submit/retrieve-lock split, sub-frame caps, zeroReorderDelay ... Latency plan §7 LN0 (Linux/NVIDIA encode follow-on): - sampled PUNKTFUNK_PERF submit split (copy/blend/map/pic) in nvenc_cuda — the host loop's submit_us folds all four together; the D2D input copy is the LN2 zero-copy target and now measurable on its own - sampled blocking lock_bitstream timing on pf-nvenc-out — in two-thread mode the host loop's wait_us wraps a non-blocking poll, so the real encode wait was measured by no timer - caps probe + log SUPPORT_SUBFRAME_READBACK / SUPPORT_DYNAMIC_SLICE_MODE (LN1 sub-frame slice-output prerequisites, fleet visibility) - explicit zeroReorderDelay=1 in the shared low-latency config (P-only + no lookahead has no reordering anyway; pins the bit against preset or driver drift; shared with the Windows backend) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 19:38:22 +02:00
enricobuehler	78dba293a8	feat(encode): Vulkan Video B0 — vendored VK_VALVE_video_encode_rgb_conversion + RGB-direct probe telemetry ... First phase of design/vulkan-rgb-direct-encode.md (punktfunk-planning): make the captured BGRx dmabuf the direct encode source with the VCN EFC front-end doing the 709-narrow CSC — deleting the per-frame compute CSC, both plane copies, the semaphore hop and one queue submit. B0 changes nothing about the encode path. It vendors the extension surface (vk_valve_rgb.rs — ash 0.38 predates it; same rationale and style as the vk_av1_encode module) and probes at open whether this host qualifies: extension present (Mesa >= 26.0 + EFC hardware) → feature bit → conversion caps cover the compute shader's exact math (709 / narrow / midpoint both axes) → encode-src format set offers B8G8R8A8 with DRM-modifier tiling. The verdict is one INFO line (rgb_direct=available | first missing requirement) — the field telemetry that decides where B1 can default on. Verified: cargo check + clippy clean + unit tests green (Linux box); the probe short-circuits to no-ext on non-RADV drivers. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-20 19:29:22 +02:00
enricobuehler	cfdec2729d	perf(encode): Vulkan Video — explicit VCN preset, persistent bitstream map, CSC split timing ... Field follow-up to 6dc195f9 (the AMD host whose H265 encode sits at ~5 ms): the remaining time is the VCN ASIC preset, and we never chose one. 1. Explicit encode quality level. RADV only emits a VCN preset op when the app issues ENCODE_QUALITY_LEVEL — we never did, so every session ran the firmware's default preset. Install the resolved level on the first frame's RESET control (chained ahead of the CBR state, which satisfies the spec's quality-change-carries-rate-control rule) and bake the same level into the session-parameters object (the spec requires the match). Default 0 = the fastest tier the driver exposes (RADV: SPEED, except H265 on pre-RDNA4 which the driver pins to BALANCE); clamped to the profile's maxQualityLevels. PUNKTFUNK_VULKAN_QUALITY=0..3 overrides for quality-biased setups. Logged at open so field logs show the tier. 2. Persistent bitstream mapping. read_slot vkMapMemory/vkUnmapMemory'd the host-visible bitstream buffer every frame; map each ring slot once at build instead (coherent memory; vkFreeMemory implicitly unmaps). 3. PUNKTFUNK_PERF CSC split. GPU timestamps bracket the compute batch (import barriers + cursor prep + CSC dispatch + plane copies) and a sampled csc_us line logs every ~2 s — separating shader/copy time from the ASIC encode inside the pump's wait_us, the VAAPI submit-split analog for this backend. Off (and unrecorded) unless PUNKTFUNK_PERF. Verified: cargo check + clippy + DPB/RPS unit tests green (Linux box). The GPU smoke tests still need a RADV host (NVIDIA driver fails session open on the build box, pre-existing). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-20 19:17:34 +02:00
enricobuehler	6dc195f982	fix(encode): Vulkan Video poll() must block per the depth-1 pump contract ... The session pump's depth-1 loop (capture → submit → poll) treats a poll() None as "the backend holds the frame internally, re-poll next tick" — true only of the libav AMF/QSV wrappers, whose codecs genuinely hold ~2 frames. The Vulkan Video backend probed its slot fence with get_fence_status instead, so the AU of every frame — finished on the ASIC in ~5 ms — sat unharvested until the tick AFTER the next frame was submitted: encode_us read as one full frame period (~17 ms at 60 Hz vs VAAPI's ~5.3 ms on the same VCN, the AMD field report) and every frame shipped a frame period late — one frame of avoidable glass-to-glass latency on the path that exists to beat libav VAAPI. Wait the oldest in-flight slot's fence in poll() instead, matching the sync NVENC backend's blocking lock_bitstream and the documented Capturer::pipeline_depth contract ("capture → submit → poll-blocks"). Bounded by ENCODE_FENCE_TIMEOUT_NS like enqueue()'s backpressure wait, for the same reason: poll runs on the thread the stall recovery runs on, so a wedged GPU must surface as an error, not park it. None now only means "nothing submitted". Covers H265 and AV1 (shared poll). Verified: cargo check + DPB/RPS unit tests green (home-worker-5); the GPU smoke tests fail at session open on that box's NVIDIA driver identically on unmodified origin/main — pre-existing, needs the RADV box for on-glass. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-20 18:53:21 +02:00
enricobuehler	de7b54d4e0	fix(core): remaining 15 sweep lows — client, clipboard, C ABI (v10), FEC, GSO, GTK ... Second and final batch from the 2026-07-20 core-sweep lows: client: - connect() timeout now sets `quit` before shutdown, so a handshake that completes after the deadline closes with QUIT_CLOSE_CODE instead of leaving the host lingering (virtual display up) for a reconnect that never comes. - probe_result: saturating_add on the wire-supplied wire_packets + send_dropped counters (debug-build overflow panic / release wrap). - the standing-latency bleed no longer sets flush_in_window: that flag is the ABR's SEVERE (×0.7) verdict, and the bleed fires only on provably loss-free windows the controller itself scores as fine. clipboard: - fetch_cancels pruned on every new fetch (was: one dead oneshot per paste for the session). - serve chunks gated on a parked waiter + capped at CLIP_FETCH_CAP with an Error event (was: unbounded silent accumulation under any req_id). - serve_inbound park bounded by FETCH_STALL_SECS + send.stopped() (was: an unanswered FetchRequest parked the task, waiter, and bi-stream forever; ~100 of them exhaust the connection's bidi budget). C ABI (ABI_VERSION 9 → 10, header regenerated, additive only): - new punktfunk_connection_clock_offset_now_ns — the LIVE re-synced offset (Swift/Kotlin latency math read the frozen connect-time value ~40ms wrong after a wall-clock step). - to_config: checked u64→usize narrowing of max_frame_bytes (32-bit armeabi truncated >4GiB to a plausible residue). - host_poll_input: no &mut held across the embedder callback (re-entry aliased it — UB under noalias); mid-drain callback clears now stick. - next_audio_pcm: DTX (empty) payloads skipped — decode synthesized 120ms of concealment per 5ms slot and grew the playout ring forever. - next_clipboard releases the parked payload on an empty poll (a one-off 50MiB paste stayed resident all session). - frames_dropped / wants_decode_latency write their documented 0/false defaults before the NULL-handle check. - gamepad constant docs match pick_gamepad() reality (DualSenseEdge/ SwitchPro landed; DualSense/DS4 honored on Windows UMDF too). FEC: - gf8 reconstruct/reconstruct_into reuse the (k,m) codec cache like encode_into (was: fresh 230×200 generator + decode inversion per lossy block on the pump thread). - vendored fec-rs: the 8 safe wrap_mul_slice shims assert equal lengths (x86 SIMD callees bound stores on input.len() — safe-code OOB write); ReconstructShard's safety contract gains the len()==get().len() clause and reconstruct_internal sizes raw slices from the slice. transport/GTK: - Linux GSO super-buffer capped at the real UDP payload ceiling (65487) not 65535 — seg sizes ≥1024 could EMSGSIZE and latch GSO off process-wide, blamed on the network. - GTK settings dialog no longer rewrites an unlisted-but-valid stored gamepad preference to "auto" on close. Already fixed on main (verified stale, skipped): the reassembler FEC ceiling, wants_decode_latency's third term, request_probe rollback + the generalized probe watchdog. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 18:26:43 +02:00
enricobuehler	76ac3cf867	fix(core): five sweep lows — seal-lane fallback, flush partial, codec echo, idle clamp, pair-name UTF-8 ... From the 2026-07-20 punktfunk-core quality sweep's adjudicated lows (~/punktfunk-sweeps/punktfunk-core-2026-07-20.json), each with a regression test: - session: the two-lane seal's dead-worker fallback dropped the frame's back half and returned Ok with half an access unit; the corpse lane was also never respawned. The send-failure arm now reclaims the tail (single-lane seals the WHOLE frame) and both failure arms drop the lane so the next large frame respawns it. A recv-side death now surfaces as an error instead of silent truncation. - reassemble: Reassembler::reset() left pending_partial parked, so a pre-flush stale partial survived Session::flush_backlog and was delivered as the first "frame" after a jump-to-live. - caps: resolve_codec echoed a non-conformant multi-bit preferred byte verbatim (downstream from_wire folds it to HEVC — possibly outside the shared set). It now isolates one bit of the intersection. - endpoint: stream_transport_idle only floored the value; an absurd operator-supplied idle timeout blew past QUIC's VarInt ms ceiling and panicked host startup through the expect. Clamped to 1s..1h. - pairing: PairRequest::encode cut the device name at a raw byte-64 boundary, splitting multi-byte UTF-8 (host showed U+FFFD forever); it now shares Hello's char-boundary truncate_to. The frozen-FEC-ceiling finding (reassemble.rs:109) was already fixed on main by the sweep's high-severity commit — skipped as stale. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 18:16:02 +02:00
enricobuehler	f4ec18d528	chore(core): fix build.rs + crate-doc drift left by the W7/W8 splits ... - build.rs: drop the stale `rerun-if-changed=src/client.rs` (the file became client/ in W7; the path never fires). - lib.rs: the crate doc's module list named 6 of ~19 modules — add the missing ones (config/error/stats/input/reject/reanchor/render_scale/ audio/wol + the quic-gated control-plane group), without intra-doc links to feature-gated modules. - quic/mod.rs: the module doc still described the deleted `msgs` module; list the actual post-split module set. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 18:08:39 +02:00
enricobuehler	ce51a2ba74	refactor(core): decompose the client run_pump monolith into pump/ submodules ... client/pump.rs was a single 1192-line async fn stacking six concerns. It is now a 190-line orchestrator (same spawn order, same channel wiring) over five focused modules: - pump/handshake.rs — connect + Hello/Welcome/Start + skew handshake + hole punch + Session construction (HandshakeOut) - pump/input_task.rs — the gamepad snapshot/removal/arrival re-send state machine + passthrough input forwarding - pump/control_task.rs— the control-stream select loop (renegotiation, probes, bitrate acks, clock re-sync, clip metadata), bundled as ControlTask - pump/datagram_task.rs — the datagram tag demux + rumble reorder gate - pump/data.rs — the blocking data-plane pump (loss reports, ABR + capacity probe, jump-to-live detectors, standing-latency bleed), bundled as DataPump Every body moved verbatim (dedent + arg-struct destructures aliasing the original binding names); no per-frame indirection added — the pump loop, its locals, and the hot-path shape are byte-equivalent. The Ctrl/DataPump arg structs exist only to stay under too_many_arguments. 196 lib tests pass; clippy clean on --features quic AND --no-default-features (--all-targets); include/punktfunk_core.h byte-identical; fmt clean. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 18:07:14 +02:00
enricobuehler	eacaaa5cd8	refactor(core): peel session.rs anti-replay, perf telemetry, and seal lane into submodules ... session.rs (1203) sharpens down to the two hot-path state machines + lifecycle (887): ReplayWindow + seq_of + their tests -> session/replay.rs; the PUNKTFUNK_PERF trio PumpPerf/SealPerf/TimedCoder -> session/perf.rs; the Phase-1.5 lane machinery SealLane/SealJob/seal_wire_slice/ TWO_LANE_MIN_PACKETS -> session/seal.rs. Facade pattern (session.rs stays the parent file); pub use keeps session::{PumpPerf,SealPerf} stable and lib.rs re-exports are untouched. Pure code motion + pub(super) bumps — seal_frame_inner/poll_frame/poll_input bodies unchanged; the wire-equivalence tests stay co-located with the seal path they pin. 196 lib tests pass, clippy --features quic --all-targets clean, fmt clean. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 17:56:26 +02:00
enricobuehler	e0a1edb9d4	refactor(core): co-locate the quic wire tests with their modules ... quic/tests.rs (1813 lines, 43 tests) was the W7 split's leftover: the source moved into handshake/caps/control/clock/pairing/pake/datagram/ endpoint/clipstream/io but every test stayed in one monolithic file. Each test now lives in a #[cfg(test)] mod tests at the foot of the module it exercises, verbatim. The two CompositorPref/GamepadPref wire/name tests moved to config.rs (where those enums live), so they now also run under --no-default-features. The clip_loopback and ctrl_framing integration mods share connect_pair via a cfg(test)-only quic/test_util.rs. Test-only motion: 196 lib tests pass unchanged on macOS, clippy --features quic --all-targets clean, include/punktfunk_core.h byte-identical. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 17:53:36 +02:00
enricobuehler	a53369bf21	fix(ci): green main again — clock_sync callers, two clippy denials, an unused import ... `ci.yml`'s clippy gate has been failing on main since the pre-0.16.0 sweep landed, and because clippy stops at the first crate it can't compile, the visible error was only ever the first of four. `ci.yml` is not tag-triggered, so v0.16.0 cut and shipped over a red main; none of this reaches the release artifacts (the two E0308s are in a test binary and a dev tool, and the rest are lints) but the gate has been blind since. Fixed, in the order clippy surfaced them: - clients/probe failed to COMPILE (E0308, x2). `810d918d` moved `clock_sync` onto the resumable `io::MsgReader` but only updated the client pump, leaving the probe passing a bare `&mut RecvStream`. The probe now wraps the control stream in a `MsgReader` at `open_bi` and threads that everywhere — Welcome, the --remode and --bitrate watchers, and the speed-test result read — which is also what the refactor was for: those reads sit behind timeouts and `select!`, exactly where a straddling frame would desync the stream for the rest of the run. - pf-capture: `SPA_META_Cursor as u32` is a `u32 -> u32` no-op (`clippy::unnecessary_cast`). Line 1274 already passes the same constant uncast, so the type is not in question. - pf-inject: `noop as usize` on the SIGUSR1 wake handler added in `986402f7` trips `clippy::function_casts_as_integer`; goes via `*const ()` as the lint asks. Same value in the `usize`-typed `sa_sigaction` slot. - punktfunk-core: the `ctrl_framing` test module's `use super::*` is unused, which `-D warnings` promotes to an error. Verified with CI's own commands on a Linux box (this is all Linux-gated code, so a Mac cannot check it): `cargo clippy --workspace --all-targets --locked -- -D warnings` finishes clean, `cargo build --workspace --locked` succeeds, and `cargo test --workspace --locked` exits 0 with no failures — including punktfunk-core's 196-test suite, which covers the control-stream framing the probe change touches. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-20 11:49:49 +02:00
enricobuehler	dd558be55b	fix(core/client): fix the four ways a speed-test probe corrupts ABR and the report tick ... There is one `ProbeState` per session and no correlation id, and two independent requesters share it: the pump's startup link-capacity probe and the embedder's `NativeClient::request_probe` (the shipped "Test connection" in the Windows GUI and the Linux GTK app). The startup path had a busy check, a watchdog and a window rebase; the embedder path had none of them, and the two collide by default — both shipped speed tests call `request_probe` on the statement right after `connect()`, and the pump's probe fires 2 s later, inside that burst. Four defects, one cluster: - The pump overwrote the shared slot unconditionally. Mid-burst it drops `base_packets`/`base_bytes`, the pump re-snapshots them against the host's full-burst denominator, and the user's speed test reports roughly an order of magnitude low; if the result lands first instead, the reset wipes `done` and the embedder's poll loop never sees its own measurement. Now it defers and retries rather than stealing the slot. - An unanswered embedder probe never timed out. `probe_active` gates the entire report tick — LossReport, the ABR window feed, the standing-latency ladder and a pending ClockResync all live inside it. A host that ignores ProbeRequest is an anticipated configuration (the startup path was given a 6 s timeout for exactly that) so the embedder path could latch `active` forever and silently switch off every adaptation mechanism for the rest of the session. Now a watchdog covers a probe of either origin. - `request_probe` latched `active` before `try_send`, so a full or closed ctrl channel returned `Closed` to the caller while leaving the session wedged in the state above. It now rolls back, mirroring the startup path. - Only the startup path rebased the ABR window past the burst. Probe filler is counted into `bytes_received` for every accepted datagram but never reaches the decoder, and the tick is suppressed for the whole burst, so the first post-burst window read the burst rate as `actual_kbps`. That poisons `proven_kbps`, a monotone high-water mark that is never decayed, which disables the x1.5 evidence-gated climb guard for the session and authorizes a climb into a rate the decoder has never carried. The rebase now happens on the falling edge of any probe, and covers the loss/packet anchors too so the first post-burst LossReport isn't divided by a filler-inflated packet count. Also: `wants_decode_latency` advertised on two of the three terms the pump actually requires to arm ABR, omitting `resolved_bitrate_kbps > 0`, so against an old host that reports no rate an embedder fed decode latency to a controller that never runs. No wire or ABI change. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-20 07:42:37 +02:00
enricobuehler	810d918d36	fix(core/quic): make the control-stream read cancel-safe ... `io::read_msg` frames a message with two `quinn::RecvStream::read_exact` calls, and quinn documents `read_exact` as explicitly NOT cancel-safe: the bytes it has already taken out of the stream live only in the future's own buffer and nothing puts them back on drop. Both long-lived control loops drive that read from a `tokio::select!` arm — the client pump alongside `ctrl_rx.recv()` and the resync tick, the host alongside probe/reconfig/clip-offer channels — and neither uses `biased;`, so any sibling that becomes ready ends the iteration and drops a partially-progressed read. `clock_sync` has the same shape via `tokio::time::timeout`, which can fire mid-frame before the session even starts. A control frame only has to straddle two wakeups for this to bite: a ClipOffer carries up to 16 kinds x 128 bytes of MIME, ~2 KB, which exceeds one QUIC packet and is subject to the pacer; any frame whose second half is lost or reordered does it too. Losing the consumed length prefix misaligns the stream permanently — the next read takes two payload bytes as a length, so Reconfigured, ProbeResult, BitrateChanged, ClockEcho and ClipState all decode as garbage and are silently dropped, and a bogus length up to 64 KiB parks the read forever. Mode switches, adaptive bitrate, mid-stream clock resync and clipboard are dead for the rest of the session; only a reconnect recovers, and the log shows at most one `warn!`. Add `io::MsgReader`, which keeps the frame in progress in the reader rather than the future and reads via quinn's cancel-safe `read`, and switch the three cancelling sites to it (client control loop, host control loop, clock_sync). The sequential handshake/pairing callers keep the plain `read_msg`, whose doc comment now states the constraint. No wire bytes and no ABI change — only how the same length-prefixed frames are assembled. Tests: a frame split across two wakeups with the read cancelled in between must resume and leave the following frame correctly framed (confirmed to fail — it hangs on the desynced stream — against the old behavior), plus a zero-length frame round-trip. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-20 07:42:37 +02:00
enricobuehler	7b2cdf5a7a	fix(core/net): bind the data plane to the authenticated peer + stop adaptive FEC wedging large frames ... Four defects from the punktfunk-core quality sweep, all in the data plane. transport/udp: the hole-punch adopted the source address of ANY datagram whose first 8 bytes matched PUNCH_MAGIC — a fixed public constant with no key, nonce or session id — and the authenticated QUIC peer was passed only as the no-punch fallback, so it was never used to validate. Hole-punch is the default bring-up path (it is skipped only for a fixed --data-port), and the data socket is an OS ephemeral, so spraying the ephemeral range during the 2500 ms punch wait let anyone steal the video plane: the legitimate client is then filtered out by the connect() and gets nothing, while QUIC stays healthy so no reconnect fires. With a spoofed source the same 8 bytes aim a full-rate stream at a third party. Take the authenticated peer IP and require the punch to match it — only the PORT is in question (that is what a NAT remaps and what the punch exists to discover); the client dials the same host IP as its QUIC connection, so a NAT presents one source IP for both planes. Also budget each read from the REMAINING window, so off-peer datagrams cannot stretch the wait past punch_timeout. transport/udp: the punch keepalive treated every send error as fatal and broke out of its loop permanently and silently. It holds a clone of the connected, non-blocking data socket — exactly the socket whose transient conditions this module defines and documents in is_transient_io. One ENOBUFS from a full wlan tx queue or an ENETUNREACH during an AP roam killed the only thing holding the NAT mapping open; the path recovers, video keeps flowing, and the stream dies later when the idle timer expires the mapping during a static scene. Route it through is_transient_io like every other send site in the file. packet: adaptive FEC moved fec_percent live (host bands it 1..=50 while Welcome advertises 10) but the receiver's per-block acceptance ceiling was computed once from the negotiated percentage and never re-derived. Once FEC ramped, every packet of a maximal block failed `total > max_total_shards`, the block never accumulated a shard, the frame aged out, and the resulting loss drove FEC higher still — large frames wedged at 100% loss exactly when FEC was meant to rescue the link. Fixed on both sides, because hosts and clients update independently: the sender clamps per-block parity to the ceiling the peer negotiated, and the receiver sizes that ceiling from the whole clamp range rather than a stale snapshot of it. No wire bytes and no C ABI signature change; WIRE_VERSION and ABI_VERSION are unchanged. Regression tests cover all three (the punch tests were confirmed to fail without the fix). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-20 07:42:37 +02:00
enricobuehler	15d51bc0ff	Merge remote-tracking branch 'origin/main' into land/sweep-all	2026-07-20 00:46:41 +02:00
enricobuehler	e9a4c4a601	feat(security): add a user-writable plugin ingest inbox for cross-account data ... The LocalService runner can't traverse the interactive user's profile the way the old SYSTEM runner could — so a plugin can no longer read a file an app running as *you* produced (the acute case: the Playnite exporter's library JSON under %APPDATA%). Confirmed on-glass: as LocalService the glob finds nothing and the profile is un-traversable. Add the inverse of plugin-state: <config_dir>\ingest, granted BUILTIN\Users Modify by plugins enable (disable reverts to inherited Users:RX). An interactive-user app drops ingest\<plugin>\… and the de-privileged runner reads it there — the one Users-writable carve-out in the otherwise Users-read-only tree. SDK exports pluginIngestDir(name) to resolve it; on Linux the systemd --user runner owns the config dir so same-user producers write there with no grant. Accepted tradeoff: the inbox is writable by any local user (trusted-single- user model; it feeds only a LocalService runner). Consumers must treat ingest data as lower trust than their own state. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 00:45:27 +02:00
enricobuehler	fdbfa37e43	fix(cli): silence host capture/DPI/GPU startup noise on management subcommands ... A plain `punktfunk-host plugins add …` printed the host's startup banner and — on Windows — ran the win32u GPU-preference hook, whose DPI-awareness probe emits a scary `SetProcessDpiAwarenessContext … "access denied"` WARN. None of it is relevant to a package-manager command, and the WARN reads like a failure. Gate both behind is_management_cli(): plugins / openapi / library / detect-conflicts / driver / web / service-management verbs skip the banner and the DXGI hook. `service run` (the SCM-launched host) is explicitly NOT lightweight, so the hybrid-GPU ACCESS_LOST fix it depends on stays intact. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 00:45:27 +02:00
enricobuehler	73ec6ed9ef	feat(security): give the de-privileged runner a writable plugin-state dir ... The LocalService runner cannot write anywhere under %ProgramData%\punktfunk (the config dir is Users-read-only), so a state-writing plugin's saveCache / config-edit / first-run mkdir all fail EPERM — proven on-glass (rom-manager only looked fine because its state dir was pre-created by an admin run and a 0-title reconcile skipped the write). Add the one writable grant the model was missing, keeping the split crisp — code dirs RX+WA, secrets R, and now a dedicated state root RW: - plugins enable / build-scripting.ps1: create %ProgramData%\punktfunk plugin-state and grant LocalService (OI)(CI)(M); disable revokes. Users stay read-only, so another non-admin still can't tamper with a plugin's launch templates. - SDK: export pluginStateDir(name) -> <config_dir>/plugin-state/<name>. Same path on Linux (the systemd --user runner owns the config dir, writable with no grant), so plugins use one branch-free helper. Plugins must persist under pluginStateDir(), not straight under the config dir. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 00:45:27 +02:00
enricobuehler	84c47cd0a7	feat(security): run the Windows plugin runner as LocalService, not SYSTEM ... The PunktfunkScripting scheduled task ran operator-installed plugin code as SYSTEM with -RunLevel Highest — any plugin defect was a full compromise of the box. The principal is now NT AUTHORITY\LocalService (minimal privileges, no password to manage, exists at boot, loopback networking works), registered without RunLevel: - installer: New-ScheduledTaskPrincipal -UserId 'LocalService' - plugins enable: converges the principal idempotently (migrating tasks an older installer or a dev box registered as SYSTEM) BEFORE starting, then grants LocalService read — via icacls, full-System32-path — on exactly the two SYSTEM/Admins-DACL'd files the runner's connect() needs: the scoped plugin-token and the TLS-pin cert.pem. Never mgmt-token. plugins disable revokes the grants; plugins status now prints the task principal so the migration is verifiable. - build-scripting.ps1 mirrors the convergence + grants on dev deploys. The usage text also mentions the new --allow-public-registry gate that lands with the supply-chain commit. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 00:45:27 +02:00
enricobuehler	9b5ca0eff3	feat(security): scope the plugin runner to a capability-limited bearer token ... The scripting runner used to hold the console's full-admin mgmt-token — a plugin defect could rewrite hooks.json (arbitrary command execution) or administer pairing. The host now mints a second persisted secret, plugin-token (PUNKTFUNK_PLUGIN_TOKEN), and require_auth grows a third lane for it: loopback-confined like the admin token, but plugin_may_access carves out /hooks (read AND write), everything under /pair, /native/pair, /native/pending, client unpair DELETEs, and other plugins' ui-credential. Everything a plugin legitimately does (status/library/events/sessions, its own UI lease) is untouched. The SDK's zero-config connect() now prefers PUNKTFUNK_PLUGIN_TOKEN / plugin-token over mgmt-token, so plugins pick the scoped credential up automatically; a script that genuinely needs the admin surface sets PUNKTFUNK_MGMT_TOKEN explicitly. Old hosts without a plugin-token fall back to mgmt-token unchanged. No OpenAPI change: the lane is auth-layer only. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-20 00:45:27 +02:00
enricobuehler	1e8b267d93	Merge branch 'fix/vulkan-open-leak' into land/sweep-all	2026-07-20 00:43:19 +02:00
enricobuehler	dafab58943	Merge branch 'fix/round1-highs' into land/sweep-all	2026-07-20 00:42:38 +02:00
enricobuehler	1dcba4dffa	Merge branch 'fix/encode-medium-tier' into land/sweep-all	2026-07-20 00:42:32 +02:00
enricobuehler	a784682d4c	fix(client/net): split the receipt stamp from the pull + bleed standing latency ... The two-pair investigation (wired Mac clients stuck at a rock-steady ~18-19 ms "network" that survived the load ending and cleared only on reconnect) exposed two structural gaps, one of measurement and one of recovery: - Receipt was stamped at the hand-off PULL (Swift nextAU, pf-client-core, Android decode loops), not at reassembly completion — so any client-side standing state between the reassembler and the pull read as NETWORK latency, undiagnosable from the HUD. ABI v9: `PunktfunkFrame`/`Frame` grow `received_ns`, stamped by `Session::poll_frame` as the AU crosses the session boundary. Every embedder now uses the core stamp; the Apple client keeps the pull instant as `AccessUnit.pulledNs` and shows the receipt→pull wait as its own "client queue" term (detailed HUD tier from 2 ms + a `queue_p50` stats-log field). Decode stages keep their pull anchor on all platforms, so no historical stage shifts meaning. - The jump-to-live detectors deliberately ignore anything under 6 queued frames / 400 ms behind — so a small, constant, loss-free elevation (a sub-frame standing backlog, or a stale clock offset after a wall-clock step/slew) is carried for the rest of the session. New third detector (`StandingLatency`, unit-tested ladder): window-MIN one-way delay ≥ 10 ms above the session floor with zero loss for ~4.5 s escalates gently — a free clock re-sync first (an applied re-sync re-bases the floor), then at most 3 flush+keyframe bleeds sharing the jump-to-live cooldown, then a loud disarm naming what it means. Loss windows reset the run: congestion belongs to FEC/ABR, not this detector. Also: mid-stream re-sync apply/discard logs debug→info — they are the forensic trail for the stale-offset case and were invisible in the field. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-19 23:38:11 +02:00
enricobuehler	134874b3c8	fix(client/windows): repair the v0.15.0 MSIX build — ARM64 feature leak + illegal XML comment ... Both MSIX matrix jobs failed at the v0.15.0 tag, for two unrelated reasons, both introduced by this release. 0.13.0 and 0.14.0 shipped both packages; 0.15.0 shipped neither. ARM64 failed to BUILD. The PyroWave Windows un-gating (1ef0229b) moved `pyrowave-sys` in pf-client-core out of `cfg(target_os = "linux")` into a general optional dependency that pf-client-core's own `default = ["pyrowave"]` turns on. The ARM64 leg builds `--no-default-features` precisely to skip it, but that only disables defaults for the two packages named with `-p` — every internal edge kept inheriting them: clients/windows -> pf-client-core, clients/session -> pf-client-core, clients/session -> pf-presenter, and pf-presenter's own `default = ["pyrowave"]` -> pf-client-core. So the vendored Granite C++ compiled on ARM64 and stopped where it always does: muglm.cpp reaching for _MM_TRANSPOSE4_PS/_mm_storeu_ps, then `simd.hpp:103 #error "Implement me."`. Those three internal edges now pass `default-features = false`; the feature is enabled only through an explicit chain (clients/session's `pyrowave` -> pf-client-core/pyrowave + pf-presenter/pyrowave, and pf-presenter's `pyrowave` -> pf-client-core/pyrowave), so `--no-default-features` finally means what it says. Verified by feature resolution rather than assertion — `cargo tree -i pyrowave-sys`: aarch64-pc-windows-msvc, --no-default-features -> not in the graph (was: present) x86_64-pc-windows-msvc, default features -> present x86_64-unknown-linux-gnu, default features -> present PyroWave is NOT dropped from the Windows client. Decode has always run in the spawned punktfunk-session binary, whose own default keeps the feature on, and unification turns it back on for the shared pf-client-core wherever that binary is in the build (x64, Linux). The shell only ever offered "pyrowave" as a codec preference string — it holds no decoder and never called one, so linking the C++ into it was dead weight even on x64. x64 built fine and failed at PACKAGING: `makepri new` rejected the manifest with PRI191 "Appx manifest not found or is invalid" / malformed comment syntax. The console tile added in 2508b720 documented its flag inside an XML comment, and XML forbids `--` anywhere in a comment body, so the literal flag spelling made the whole manifest unparseable. Reworded, with a note to keep the next person from reintroducing it. Confirmed by parsing both revisions after template substitution: the tagged manifest fails at line 63 col 9, this one parses. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-19 23:20:29 +02:00
enricobuehler	134fba1424	fix(inject): heap the SwDeviceCreate callback context; stop latching a pad slot on a failed create ... Two medium findings from the round-1 sweep, each applied to both siblings. - create_swdevice stack-allocated the SwCreateCtx that the async PnP completion callback writes through (result + up to 127 u16 of instance id) and then SetEvents. The wait is bounded at 10s, so on a wedged-PnP timeout the callback can still be PENDING: the frame is popped, the input thread reuses that stack, and a late callback corrupts it and SetEvents an already-closed (possibly recycled) handle. The context is now heap-allocated and reclaimed only where the callback provably ran; on the timeout path the box is deliberately leaked and the event left open, so a late write always targets live memory. Costs a one-off ~264 B + one HANDLE on that rare path. Applied to the DualSense path and its XUSB sibling in gamepad_windows.rs. - Ds4WinPad::open swallowed a create_swdevice failure into a WARN and returned Ok with no devnode. PadSlots::ensure then stored Some(pad) AND called gate.on_success(), so the slot short-circuited on is_some() forever and the capped-backoff retry that exists precisely to self-heal a transient PnP failure never ran — the game saw no controller for the rest of the session unless the client unplugged the pad. Now propagates, matching the XUSB sibling. Same fix applied to steam_deck_windows.rs. Windows .173: pf-inject 53/0. Linux .21: pf-inject 74/0 (8 ignored). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-19 23:19:19 +02:00
enricobuehler	fe4af1761e	fix(capture): stop stranding a PipeWire buffer on a caught panic; invalidate the PyroWave CSC on ring recreate ... Two medium findings from the round-1 sweep. - The `.process` callback dequeued a buffer INSIDE its `catch_unwind`, and every requeue site was inside too. `newest` is a raw pointer with no Drop, so any caught panic (update_cursor_meta / consume_frame) unwound past all three requeues and permanently stranded that buffer. Once the stream's fixed pool drained, `dequeue_raw_buffer` returned null every call and capture silently wedged while still reporting negotiated/active — defeating the very catch_unwind that was meant to keep a panic survivable. The drain loop now runs OUTSIDE the catch (dequeue/queue are non-panicking C FFI pointer ops) and `newest` is requeued exactly once after it, on every path: normal, corrupted-skip, or caught panic. - `recreate_ring` invalidated `video_conv` and `hdr_p010_conv` but not `pyro_conv`. That converter is mode-baked — BgraToYuvPlanes selects entirely different shaders and output formats for SDR (8-bit BT.709 → R8/R8G8) vs HDR (scRGB→PQ BT.2020 → R16/R16G16) — and `ensure_pyro_conv` only builds when None, so a display_hdr flip reused the stale SDR converter against a freshly HDR-formatted pyro ring, corrupting every frame. Reachable at the documented "Downgrade point D": a PyroWave session with client_10bit=true that opens on a box where HDR can't enable, then flips once the display comes up. Linux .21: pf-capture 1/0. Windows .173: `cargo check -p pf-capture` clean. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-19 23:16:25 +02:00
enricobuehler	26ff005e70	fix(zerocopy): error-path leaks, exception-safe fence wait, odd-height NV12 overrun, worker reaper deadline ... Seven medium findings from the round-1 sweep, all in pf-zerocopy. Adjudicated against source; all zero-copy-preserving (no GPU→CPU→GPU roundtrip introduced). - import_src (vulkan.rs) leaked a VkBuffer + VkDeviceMemory + dup'd fd on every fallible step before the success-only src_cache.insert. A failed import is survived by the worker and RETRIED by the caller every frame, so this leaked per frame for the worker's whole lifetime. Now owns the dup fd via OwnedFd (closes on early return until Vulkan consumes it at allocate_memory) and destroys the buffer + frees memory on each error path. - ensure_dst destroyed the old exportable buffer and nulled self.dst BEFORE building the replacement, so a failed rebuild both dropped the working buffer and leaked every object the partial rebuild created (raw ash handles, no Drop; VkBridge::drop only frees the live self.dst). Now builds fully, unwinds each error locally, and swaps only on success. - The submit→wait→reset sequence in import_linear_nv12 / import_linear `?`-ed out of wait_for_fences BEFORE reset_fences on a TIMEOUT/DEVICE_LOST, leaving the shared self.cmd PENDING and self.fence IN-USE while the caller retries on the same bridge (and ensure_dst later destroys dst.buffer assuming nothing is in flight). Now drains the GPU (device_wait_idle) and resets the fence before propagating — fixing the reported ensure_dst UAF at its source. - copy_pitched_nv12_to_buffer writes height.div_ceil(2) chroma rows into a UV plane sized at height/2, so an odd height overruns by one uv_pitch row (OOB device write / CUDA_ERROR_ILLEGAL_ADDRESS). Added the even-dimension guard to import_linear_nv12, matching Nv12Blit/Yuv444Blit. - sweep_reaper only reaped already-exited workers, so a worker wedged inside a driver call lingered forever holding its CUcontext + BufferPool (hundreds of MB VRAM). Now force-kills a child parked past REAPER_KILL_DEADLINE (20s). Compile + tests green on Linux .21 (RTX 5070 Ti): pf-zerocopy 17/0. The error paths themselves are not fault-injected; the fixes are structural. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-19 23:10:06 +02:00
enricobuehler	986402f731	fix(inject,zerocopy,capture): teardown deadlock, GL→CUDA copy race, cursor-meta OOB read ... The three high-severity defects from the round-1 sweep of pf-inject / pf-zerocopy / pf-capture (adjudicated against source — all 7 reported criticals in these crates downgraded; these were the real highs). - pf-inject steam_gadget: `SteamDeckGadget::drop` set `running=false` then joined the control thread, which spends steady state parked in a blocking, no-timeout `EVENT_FETCH` ioctl that only tests `running` at its loop top. The flag never reaches it, closing the fd can't wake an in-flight ioctl (the syscall holds a file reference, and the fd is shared via Arc by the very threads being joined), so the join hung — and it runs on the session input thread via `PadSlots::sweep`, driven by the client's `active_mask`, so a remote peer clearing its pad bit could freeze all session input. Now wakes the parked threads with SIGUSR1 (no-op, non-SA_RESTART handler → the ioctl returns EINTR and the loop exits), retried until each reports done and bounded (~1s). - pf-zerocopy cuda: the GL→CUDA "sync point" was never established for the copy. `cuGraphicsMapResources`/`UnmapResources` were issued on the NULL stream, but the D2D copy runs on `copy_stream()`, a `CU_STREAM_NON_BLOCKING` stream exempt from implicit NULL-stream ordering — and the GL de-tile/CSC that produced the texture ends with only `glFlush` (no fence). So the copy could race ahead of the not-yet-retired GL draw: intermittent stale/torn frames under GPU load, on the default NVIDIA capture→encode path. Map, copy, and unmap now share `copy_stream()`, so map's device-side guarantee orders the GL work before the copy. Zero-copy preserved (no GPU→CPU→GPU roundtrip). - pf-capture cursor meta: `update_cursor_meta` trusted three producer-written fields (bitmap_offset, pixel offset, stride) with no bound against the metadata region, driving OOB pointer arithmetic and an oversized `from_raw_parts` — an OOB read that SIGSEGVs inside the PipeWire `.process` callback (uncatchable by the surrounding `catch_unwind`). Switched to `spa_buffer_find_meta` to obtain the region's real `size` and validate every offset with checked arithmetic before each deref/slice, mirroring the fd-length guard the main frame path already applies. Compile + existing tests green on Linux .21 (real RTX 5070 Ti): pf-inject 74/0, pf-zerocopy 17/0, pf-capture 1/0. The gadget deadlock path only executes on a SteamOS host with raw_gadget/dummy_hcd (not reproducible on the CachyOS box), so that fix is reasoned + compile-verified, not runtime-exercised. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-19 22:53:15 +02:00
enricobuehler	28491acf2a	fix(encode): unwind Vulkan Video open failure instead of leaking every prior object ... VulkanVideoEncoder::open_inner creates ~20 Vulkan objects across ~15 fallible steps, but all cleanup lived in the encoder's Drop — which only runs once the value exists at the final Ok(Self). Any earlier ?/bail! leaked everything built so far (a VkDevice + GPU memory per retried open, and this backend is the default encode path on AMD/Intel Linux hosts where open can fail transiently). Factor the entire teardown sequence — unchanged — into a VkTeardown guard whose Drop destroys any prefix of the build (vkDestroy*/vkFree* are defined no-ops on VK_NULL_HANDLE): open_inner mirrors each object into the guard as it is created and disarms it only at Ok(Self); the encoder's own Drop rebuilds one from its fields, so both paths share one sequence and cannot drift. make_frame now builds in place into a guard-parked null Frame so a mid-build failure unwinds its partial handles too, and make_video_image / vk_util::make_plain_image (also used by the PyroWave backend) / build_parameters_h265 no longer leak their own partially-created objects on failure. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-19 22:15:44 +02:00
enricobuehler	b0fbb80fd5	fix(encode): key the PyroWave plane-import cache on the capturer's ring generation ... Completes the partial fix from the previous commit. The Windows PyroWave backend caches its imported plane images keyed on the D3D11 texture's COM address, and holds no reference on that texture — so once the capturer recreates its ring, those addresses can be handed straight back out by the allocator and a pointer-keyed cache hit returns an image bound to a texture that no longer exists. Adding the extent to the key ruled out same-address-different-size aliasing, but a recycle at identical dimensions still aliased. The capturer already tracks exactly the value needed: `generation`, bumped on every ring recreate. Plumbed it onto `PyroFrameShare` and the encoder now flushes every cached import when it changes, which makes cache identity independent of allocator behaviour rather than a bet against pointer reuse. Validated on the RTX box: `pyrowave_win_smoke` (forced with `--ignored`, the only test that actually exercises this path on real hardware) passes all ten configurations — 1024²/720p/1080p/1440p across SDR/HDR and 4:2:0/4:4:4 — with correct decoded chroma means, so the steady-state cache-hit path still works. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-19 21:45:14 +02:00
enricobuehler	6f52397342	fix(encode): bound NVENC async pipelining by the capturer's texture ring ... The Windows direct-NVENC backend registers and encodes the capturer's textures IN PLACE (no CopyResource), so how deep it may pipeline is a property of the CAPTURER, not of the encoder. It was bounded only by `async_inflight_cap()` — `PUNKTFUNK_NVENC_ASYNC_DEPTH`, default 4, clamped to the output-bitstream pool — which consults nothing about the capturer, while the comment at the backpressure loop claimed it "keep[s] in-flight depth within the capturer's texture ring". It never did. The IDD-push capturer rotates `OUT_RING = 3` per delivered frame with no regard for encode completion (its own invariant note says OUT_RING(3) > max pipeline_depth(2)). With the default async depth of 4 the encoder can therefore still be reading a texture the capturer has already handed out again and overwritten: torn or mixed frames. It is visual corruption rather than UB, so it fails silently and intermittently — the worst shape to diagnose from a field report. Adds `Encoder::set_input_ring_depth`, reported from `Capturer::pipeline_depth`, and bounds the async backpressure loop by `min(async_inflight_cap(), depth)`. For IDD-push that yields 2, matching the capturer's stated contract; backends that copy their input, or are synchronous, ignore it. Wired at ALL THREE encoder-creation sites (initial open, stall/resize rebuild, ABR rebuild) and forwarded through `TrackedEncoder` — this crate has a documented trap where an unforwarded defaulted trait method silently no-ops through that wrapper, which has already bitten the direct-NVENC work once and the wire-chunking probe once. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-19 21:42:53 +02:00
enricobuehler	a38adad943	fix(encode): bound GPU waits, validate encode status, repair command-buffer and cache invariants ... Five of the nine medium findings from the pf-encode sweep. The remaining four need cross-crate plumbing or an unwind refactor and are deliberately left out. - vulkan_video `enqueue` waited on the backpressure fence with `u64::MAX`. That wait runs ON the host encode thread — the same thread the stall watchdog's `reset()` would run on — so a wedged GPU parked the one thread that could recover the session: no error, no reset, and teardown blocking on the join. This is the DEFAULT encode path for AMD/Intel Linux hosts (both shipped build recipes enable `vulkan-encode` and `vulkan_encode_enabled()` defaults true). Now bounded by ENCODE_FENCE_TIMEOUT_NS with expiry surfaced as an error. - vulkan_video `import_cached` evicted a cached dmabuf import and destroyed its image/view/memory with no fence wait, while up to `ring_depth - 1` submitted frames may still reference it — a GPU-side use-after-free. `Drop` and `reset` both idle first; this was the one unguarded destroy. Now idles before the eviction loop, guarded on the length test so the steady state pays nothing. - vulkan_video `read_slot` never asked for the encode's operation status, so a FAILED encode was indistinguishable from a successful one and its feedback was read as if it described real bitstream. Now requests WITH_STATUS_KHR and refuses anything that is not COMPLETE. - linux/pyrowave `encode_frame` opens its recording window early and has six fallible steps inside it; every one returned with `cmd` still RECORDING, and nothing repaired it (one `begin_command_buffer` in the file, and neither `reset()` nor `Drop` touches `cmd`), so the next frame called `begin` on a recording buffer — invalid usage. `submit` now resets the buffer on error; legal on all these paths since the pool carries RESET_COMMAND_BUFFER and the buffer is not pending. - windows/pyrowave `encode_frame` ignored `frame.width`/`height` and imported planes at the encoder's configured extent, so a ring recreate at a new mode (the IDD capturer does this autonomously on a confirmed descriptor change) read the planes under a stale VkImageCreateInfo. Added the size guard its QSV and AMF siblings already carry, and keyed the plane cache on (address, width, height) so a recycled COM address cannot resurrect an import of a different size. NOTE: a recycle at the SAME size is still theoretically possible; the complete fix keys on the capturer's ring generation and needs that plumbed onto `PyroFrameShare`. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-19 21:34:16 +02:00
enricobuehler	b22d0da75b	fix(encode): port the RFI taint sweep to Vulkan Video, close the QSV sweep hole, bounds-check encode feedback ... Three defects from the pf-encode sweep, each adjudicated against source. - Vulkan Video never received fecbec2d's taint sweep (it was carved out one commit later). `pick_recovery_slot` accepts any resident slot whose wire is below the CURRENT loss start, but "resident and older than this loss" is not "the client decoded it": after an earlier loss [a,b] recovered at wire r, everything in [a, r-1] is undecodable at the client — the lost frames plus every frame that predicted through the gap — and those wires stay eligible until the 8-slot ring rolls them out. A later loss could therefore anchor on one and ship it tagged `recovery_anchor`, which is the client's definitive re-anchor signal (punktfunk-core/src/reanchor.rs): the host lifts the client's post-loss freeze onto a picture built from a reference it never had. Swept before anchor selection, matching AMF/QSV. `slot_wire` is blanked and `slot_poc` deliberately is NOT: `slot_poc` feeds `build_h265_rps_s0`, which must keep naming every physically-resident DPB picture or a conforming decoder evicts them and the anchor then references a picture the client already dropped. - QSV's sweep was incomplete, and in its MODAL case. `ltr_slots` mirrors the hardware DPB, but nulling an entry issues no VPL call — the frame stays marked long-term until that LongTermIdx is re-marked or an IDR flushes it (amf.rs states this verbatim). The rejection loop iterates the post-sweep mirror and only rejects `Some` slots, so it silently skipped the single entry the sweep exists to distrust, leaving the recovery frame free to predict from it. With NUM_LTR_SLOTS=2 the "exactly one slot swept" case is the common one, and the two existing tests cover only the both-survive and both-swept cases. Taint is now recorded in `ltr_tainted` with the FrameOrder left in place, so anchor selection and the queued-force guard skip it while the rejection list still names it. - `read_slot` built a slice from the driver-reported (offset, bytes-written) encode feedback with no validation against `bs_size`, so a driver reporting a range outside the bitstream buffer produced an out-of-bounds read shipped straight onto the wire. Checked in u64 (so the add cannot wrap) before `map_memory`, so the error path has no unmap to unwind. Adds `taint_sweep_excludes_slots_from_an_earlier_loss` covering the two-loss case the existing single-loss test does not reach. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-19 21:18:17 +02:00
enricobuehler	f9668b16a1	fix(encode): NVENC partial-init session leak + three backend-parity gaps ... All four found in the pf-encode quality sweep and verified against source. - NVENC partial-init leak (BOTH platforms, high): `init_session` publishes `self.encoder` — and on Windows charges LIVE_SESSION_UNITS — *before* its remaining fallible steps (bitstream buffers; on Linux also the input-surface alloc and `register_resource`). A failure there left a live session with `inited == false`, and every guard on the re-init path keys off `inited`, so the next submit skipped teardown and overwrote `self.encoder`: the session leaked permanently toward the driver's per-process cap, and its budget units never returned, progressively starving parallel-display admission. `teardown` already keys off `encoder.is_null()` rather than `inited`, so it cleans up exactly this half-built state — it just was never called. Now invoked on the `init_session` error path on both platforms. - `can_encode_10bit` asked the wrong backend (medium): it resolved via `linux_auto_is_vaapi`, which ignores `encoder_pref`, while `can_encode_444` and `open_video` honour it. On a host that forces a backend (e.g. `encoder_pref = "vaapi"` on an NVIDIA box) the probe answered for NVENC while the session opened VAAPI, so the negotiated bit depth — and the HDR/SDR colour label derived from it — described a backend that never ran. Now uses the same `linux_zero_copy_is_vaapi` mirror, and `linux_auto_is_vaapi` carries a warning that it resolves the `auto` case only and is not a dispatch mirror. - Linux software arm ignored SW_BITRATE_CEIL (low): the Windows arm clamped openh264 to 100 Mbps, the Linux arm passed the full negotiated rate. The constant is now module-scope so both arms share one value. - QSV/AMF env-parity (low): `PUNKTFUNK_IR_PERIOD_FRAMES` was a no-op on QSV despite the comment claiming parity with AMF, and `PUNKTFUNK_NO_QSV_LTR` / `PUNKTFUNK_INTRA_REFRESH` had dropped AMF's `trim()` and `yes`/`on` spellings, so a value with stray whitespace silently did nothing on Intel while the same value worked on AMD. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-19 20:47:55 +02:00
enricobuehler	04e4394ee0	fix(encode): close the two teardown memory-safety holes in the reset paths ... Both surfaced in a post-refactor quality sweep of pf-encode and were then verified against the source (and, for pyrowave, against the C side). - PyroWave (BOTH platforms): `reset()` destroyed the encoder and, when the rebuild failed, returned `false` leaving `pw_enc` pointing at the freed object — `Drop` then destroyed it a second time. `pyrowave_encoder_destroy` is a plain `delete` (pyrowave_c.cpp:1184, which also reads `encoder->device` afterwards) with no null check, so this is a real double free. The failure branch is not vacuous: the rebuild fails when the device is lost/OOM, which is exactly the state that makes the stall watchdog call `reset()` in the first place, so the host corrupts its heap on the path that runs when things are already going wrong. Now nulls `pw_enc` before the fallible create, publishes only on success, and null-guards both `Drop` and `encode_frame` (the Windows `Drop` already guarded `sync` this way). - QSV: `reset()` dropped `pending` — each entry owning the `Box<BsBuf>` the runtime writes into asynchronously — BEFORE `MFXVideoENCODE_Close` aborted those operations, so the VPL runtime could write into freed heap. The preceding drain is best-effort and bails on the first `Err`, i.e. precisely the wedged-encoder case that triggers the reset. Fixed by ordering: Close, then clear. The full-teardown path was already correct (`Inner` declares `session` before `pending`, and fields drop in declaration order). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-19 20:07:57 +02:00
enricobuehler	c2bba13405	feat(host/web): per-scanner library toggles in the console ... Every installed-store scanner (Steam; Lutris+Heroic on Linux; Epic/GOG/ Xbox on Windows) was hardwired on. New library-scanners.json persists the operator's disabled set (default all on; absent/malformed = all on); all_games() gates each provider, so disabling one hides its titles from every surface (console grid, native clients, GameStream app list, launch resolve). GET /library/scanners lists this platform's scanners + state; PUT /library/scanners/{id} toggles and emits library.changed — admin lane only (the cert allowlist's exact-path /library match keeps both off the LAN surface). The console's Library page grows a "Game sources" card with one chip per scanner (platform-shaped by the API), EN+DE strings, story. The scanners are slated to become plugins; the stable per-scanner ids are the migration seam. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-19 19:58:05 +02:00
enricobuehler	940a260506	fix(host): retry the audio first-open instead of running the session silent ... Session start is peak endpoint churn on Windows — the virtual-display attach and the wiring plan's own IPolicyConfig default flips race the first WASAPI activate, which then fails transiently (IAudioClient 0x80070002, endpoint mid-re-registration) — and a first-open failure killed audio for the WHOLE session: wasapi_cap's capture thread sent the error through the ready handshake and exited, and the native plane's audio thread returned instead of entering its reopen loop (each layer's comment claimed the other retried; neither did). Two-layer fix: the WASAPI capture thread gives the first open three attempts a second apart before failing the handshake, and the native audio thread treats a failed first open like a mid-session capture death — it enters the existing reopen-with-backoff loop, so audio starts a few seconds late instead of never. The GameStream plane gets the WASAPI-level retry for free. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-19 19:37:03 +02:00
enricobuehler	40c2f68231	feat(client): device-pick plumbing — GPU enumeration + audio endpoint targeting ... The Settings GPU pick existed (adapter → PUNKTFUNK_VK_ADAPTER) but no Linux shell could enumerate anything to pick: the GTK shell deliberately links no Vulkan. pf_presenter::vk::list_adapters() reads the physical devices' marketing names (no surface, discrete first, deduped — the name is the whole match key in pick_device), surfaced as `punktfunk-session --list-adapters`. Audio gets the same treatment for the new speaker_device/mic_device settings (PipeWire node.name; empty = default): session main maps them onto PUNKTFUNK_AUDIO_SINK/SOURCE — a hand-set env still wins, like the adapter — and the playback/mic streams pass them as `target.object` (raw key: the keys::TARGET_OBJECT constant is feature-gated on a newer libpipewire than we require). pf_client_core::audio::devices() is the registry roundtrip the pickers read, exposed for debugging as `punktfunk-session --list-audio`. The WASAPI leg (Windows endpoint IDs) is still to come; the fields are ignored there. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-19 19:32:38 +02:00