2245 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
enricobuehlerandClaude Opus 5	f2e1b9872c	fix(web): four "fixes" from this branch that did not actually fix anything ... A verification pass re-read every finding from the original sweep against the code on this branch rather than against the commit messages. It found that four of them were still broken, two because the edit I made was inert. Commit messages claim; code decides. - **The Storybook typecheck was never on.** `tsconfig.json` listed `.storybook` as a bare directory name, and tsc silently skips dot-prefixed directories in that form — so the entry typechecked nothing at all. Proved it by planting `export const __probe: string = 1` in `.storybook/preview.tsx` and watching `bun run lint` pass. `.storybook/**/*` is what actually pulls it in; the same probe now fails as it should. - **The Moonlight stale-PIN reset was a no-op.** `submit.reset()` sat at the top of `onSubmit`, immediately before `submit.mutate(...)` — which moves the status to pending in the same update, so it cleared a flag that was already changing. The green "PIN sent" note therefore still greeted the next pairing attempt over an empty PIN box. It now resets on the transition that actually matters: `pin_pending` going false → true. - **The session⇄game controls had the enforcement flag inverted**, and I never touched it. `enforced.length === 0 || …` reads an EMPTY list as "this build enforces everything", when the contract says the opposite in as many words: "Empty on a platform with no launch path (macOS), so the console can say so instead of offering a switch that does nothing". On exactly the platform the flag exists for, every control stayed live and reported success for an axis the host would never act on. Absent still means "assume it acts" — that is the compatible reading for an older host, and a different case from present-empty. - **Logout stopped revoking after a restart.** The epoch was a module-level counter starting at 1, so it revoked within one process run and then reset — and since the seal key derives from the stable mgmt token, a cookie captured before a restart unsealed fine and was accepted again for the rest of its 7-day TTL. One service restart undid the whole fix. It persists next to the host's config now. Verified: log out, restart the console, the captured cookie still 401s, a fresh login still works. Two more the pass rated as partial, both worth closing: - The plugin-UI response filter was a denylist of four header names, so `Clear-Site-Data` sailed through — a plugin error page could wipe `pf_session` and sign the operator out of the console, on our own origin, because the iframe is same-origin by design. It is an allowlist now; a plugin-supplied CSP, `X-Frame-Options` or CORS header no longer speaks for us either. - A half-configured TLS setup now refuses to start instead of logging a warning and serving anyway. Neither shape can work — one path missing puts the login password on the LAN in the clear, and PUNKTFUNK_UI_SECURE without TLS marks the cookie Secure so the browser drops it and login can never stick. Exiting with a reason beats a console that looks fine and is not. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:20:10 +02:00
enricobuehlerandClaude Opus 5	dc57aa653c	feat(web): the console can say what just happened, and hand a phone the way in ... **Recent activity.** The console could describe the present — a status snapshot — but never the recent past. A client that connected and left while you were on another page left no trace anywhere you could look, and the host's own log is a developer artifact rather than a narrative. The event stream was already open for cache invalidation, so a feed costs one ring buffer next to it: every frame is recorded, labelled per kind, and rendered newest-first on the dashboard. Deliberately in-memory and bounded to 200. It starts empty on a page load and fills as things happen, which is the honest shape for a live tail — an audit trail would need the host to keep one, and pretending otherwise would be worse than not having it. **Connect a device.** The console knew the host's address and identity all along and never offered either in a form you could hand to a phone: pairing meant reading an IP off the Host page and retyping it on a couch. There is a card now with the address and a `punktfunk://connect/<uniqueid>` deep link, both copyable — the link is the shipped client grammar (clients/shared/deeplink-vectors.json), so an installed client opens straight onto this host. No QR: rendering one needs an encoder we do not bundle, and a wrong QR is worse than none. **Installable.** A web manifest and the theme/apple meta tags, so the console can live on a phone's home screen — which is where it is used from as often as from a desk. No service worker on purpose: an offline shell for a console whose every screen is live host state would only ever show stale numbers convincingly. The manifest is reachable without a session (install needs it, and it says nothing the login page doesn't); /api stays gated, verified. Verified in a browser: three host-emitted events appear in the feed with the right labels, the deep link renders and copies as `punktfunk://connect/abc123`, and the manifest serves 200 as application/manifest+json while /api/v1/host still answers 401. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:20:10 +02:00
enricobuehlerandClaude Opus 5	b8f603c8a1	feat(web): the numbers behind "it's slow to start" and a way to clean up after a plugin ... Three things the host already reports and the console never showed. **Stream diagnostics.** `RuntimeStatus.stream` has carried the session bring-up time, the last mid-stream resize cost, the client's FEC parity floor and the packet size for as long as the endpoint has existed, and the dashboard showed none of them. So "it takes ages to start" and "it hitches when I change resolution" had no number attached anywhere in the console — you had to take a stats capture to see a value the status endpoint was already returning. The two timings are native-plane only and null until the first frame lands, so each appears once it means something. **Loss and FEC recovery while the capture runs.** The health chart existed but only in the saved-recording view, which is backwards: dropped frames and FEC recovery are what you watch a live capture for. It now sits under the latency and throughput charts on the live card, keeping the GameStream caveat (only `frames` is instrumented on that plane). **Provider-owned library entries.** A plugin can sync entries into the library, and the host then refuses to edit or delete them one at a time — correct, and completely opaque once the plugin is gone: its games sit in the library with no console-side way to remove them. `DELETE /library/provider/{provider}` is the documented clean-uninstall path and nothing called it. There is a card now that names each provider, counts what it owns, filters the grid to it, and removes its entries in one go. Also: the dashboard's PIN tile really does say "Waiting"/"None" now. The earlier commit added the strings but the edit that was supposed to use them silently did not apply, so the tile still rendered a bare "●". Caught by auditing every message key for a call site — the other 543 are wired. Verified in a browser: the providers card shows, counts, and filtering hides non-provider entries. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:20:10 +02:00
enricobuehlerandClaude Opus 5	0751265105	fix(web): editing a library entry warns before it wipes what the console cannot see ... `PUT /library/custom/{id}` replaces the whole entry — the host assigns `slot.prep = input.prep` and `slot.detect = input.detect` outright (library/custom.rs). But `GET /library` returns a `GameEntry`, which carries neither field, so the console builds its payload from a read model that has already lost them. Editing a title to fix a typo silently cleared any prep/undo commands and detection hints the entry had. The console cannot round-trip what the read API will not tell it, so this is a warning, not a fix: the edit form now says plainly that saving replaces the entry and that anything configured outside the console will be cleared. The actual fix is host-side — expose `detect` and `prep` on the library read model — and is noted in the code where it belongs. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:20:10 +02:00
enricobuehlerandClaude Opus 5	b9b0df349d	fix(web): the charts stop lying about time, and logging out logs you out ... The stats charts drew every sample as an evenly-spaced slot, because recharts defaults to a category axis. A capture that idled for two minutes rendered that gap as a single step — so the one view you open specifically to find where the time went was the view least able to show it. All three charts use a numeric time axis now, so the spacing is the elapsed time. They also joined samples across a session boundary into one continuous line, implying a continuity that never existed: the stream stopped and somebody else started a new one. A capture is split at each `session_id` change now. And the live card plotted the whole capture-so-far every 2 s, re-serialising and re-plotting an unbounded series for a capture left running all evening; it plots a bounded tail and says so, with the full series still in the saved recording. Logging out only deleted the browser's copy of the cookie. The session is stateless, so a value captured beforehand — a shared machine, a shell history, a TLS-inspecting proxy — stayed valid for its full 7-day TTL and there was nothing the operator could do about it. Sessions carry an epoch now and logging out bumps it, which invalidates every cookie issued so far. Verified end to end: a captured cookie works, survives nothing across a logout, and a fresh login still works. The rest: - The update card could not show its own timeout warning. It was suppressed by a `job` field read from the last snapshot — which, when the host has gone away mid-job, is exactly the case the warning exists for. Nothing ever cleared the applying state either, so the card waited forever with no way out; there is a button now. "Check now" also surfaces the host's 429 instead of looking dead. - A running install survives a reload: the job id lived only in component state, so refreshing lost sight of an install that was still running while the Install buttons stayed armed against a host that answers 409. The host keeps the list — ask it. - An all-sources-failed catalog said "no plugins available". That is a successful request carrying nothing, not an empty store; it names the sources that failed. - The Installed tab rendered "vundefined" for a plugin with no recorded version (nullable in the contract, typed required here). - The Displays "In effect" badges were computed from the local draft, so they restated the operator's unsaved edits back to them as though the host had adopted them. They read the API's `effective` now. A failed background poll no longer replaces a form someone is editing, and leaving the page with unsaved edits prompts — the old `beforeunload` guard never fired for in-app navigation, which is how you actually leave. - Enter or Space on a preset's rename/update/delete icon applied the preset instead of running the action: keydown bubbled to the card. - Dates follow the console's locale, not the browser's. The dashboard's PIN-pending tile says "Waiting"/"None" instead of "●"/"—". - The Bun entry warns when TLS is half-configured, or when PUNKTFUNK_UI_SECURE is set without it — both of which silently break login. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:20:10 +02:00
enricobuehlerandClaude Opus 5	de17ceb8f8	fix(web): a newly installed plugin shows up on its own, and the display form can be used without a mouse ... Installing a plugin left the sidebar unchanged until a reload. The reason is timing, not caching: the host restarts the scripting runner AFTER the job reports done, and the plugin only registers its UI once that comes back — several seconds later, by which point the one-shot invalidation had already run and found the old list. The nav then waited out the 30 s idle poll, which in practice meant "until I reloaded". Anything that changes the installed set now switches the directory to a 2 s poll for a minute, so the entry lands about a second after the plugin actually comes up. Measured end to end in a browser: 29 s → 7 s, with the plugin registering at 6 s. The plugin entries also never animated. They are rendered outside the `motion.nav` that carries the variants and the stagger, so they inherited neither and simply appeared — most visibly in exactly the case above, where one shows up in a nav that is already on screen. They get their own animation container now, matching the main nav. (A motion-wrapped div around the link, not `motion(Link)`, which erases TanStack's typed `params`.) The accessibility pass on the display form, where the console's densest controls live: - The Custom block's numeric inputs had a `<label>` with no `htmlFor` next to an `<input>` with no `id`, which labels nothing at all — a screen reader announced them as unnamed spin buttons. Single controls are paired properly now; the button groups became real `<fieldset>`/`<legend>`, which is what they are. - Every option group signalled its active choice with fill colour alone. They carry `aria-pressed` now, so the state is available to assistive tech and not only to people who can compare two button variants. - `QueryState`'s error branch is a live region, so a query that fails announces the failure instead of silently swapping one region for another. - Motion honours `prefers-reduced-motion` instead of overriding it. - `<html lang>` follows the locale instead of claiming "en" while the app renders German. Verified: switching to de flips the attribute. - "Close menu", "Language" and "Loading" went through the message catalogue. Also: ten dead message keys removed (a whole removed Clients page and the old Settings token field), and the README no longer tells operators to set the management token under "Settings → API token" — that field is gone and the token has been server-side only for some time. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:20:10 +02:00
enricobuehlerandClaude Opus 5	9e505aba41	fix(web): the console stops swallowing the host's answer when it says no ... The host writes genuinely useful refusals — "entry is owned by provider `x`, update it through its reconcile" — and a dozen call sites threw them away. The pattern was always one of two: a mutation whose `error` nothing rendered, or an `await mutateAsync(...)` with no catch, which additionally produced an unhandled rejection. Either way the operator clicked, nothing visible happened, and the thing they asked for silently hadn't. Fixed at each site, with the host's own message shown where there is one: - Adding or editing a library entry kept the form open and said why, instead of closing it as if it had saved and taking the typing with it. Deleting one reports the refusal rather than leaving the card sitting there. - The GPU preference, capture start/stop, recording delete and download, and the dashboard's stop-session / request-keyframe / end-game all report failure. The failed capture STOP is the one that mattered most: it is "stop & save", so a swallowed error meant minutes of recording vanished with nothing on screen. - The recordings Download had a comment claiming the detail view surfaces its errors. It only does that for the selected row, and Download is on every row. Two related fixes in the same area: - `apiFetch` no longer navigates to /login synchronously from inside whichever call noticed a 401 — very often a background poll the user never started. Tearing the page down mid-render took unsaved editing state with it, which the Displays page explicitly models. It defers a beat and coalesces, so a burst of parallel 401s schedules one navigation. - The plugin liveness probe treated the auth gate's 302 → /login → 200 HTML as a healthy plugin, and rendered the console's own login page inside the plugin's iframe. It also gave up permanently on the first failed probe, so the runner restart at the end of every install threw away whatever was open in another plugin. It rejects the redirect and keeps probing on a slower beat while down. `apiErrorMessage` moves out of the display card into src/lib/errors.ts, since half the console needs it now. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:20:10 +02:00
enricobuehlerandClaude Opus 5	4a5d4b0a71	feat(web): the console follows the host's events instead of asking ten times a minute ... The host has published every lifecycle transition on GET /api/v1/events since the API existed — client connect/disconnect, session and stream start/end, pairing decisions, display create/release, library, store and plugin changes — and nothing consumed a byte of it. The console instead polled ten endpoints on 1-5 s timers, so a change was up to 5 s stale and two pages could disagree while you looked at them. The Library page polled not at all: install a game in Steam and it never appeared until a full reload. The console now subscribes once and invalidates exactly the queries an event affects. Events never carry data into the cache — they only say "this is stale" — so an unknown future kind costs nothing and a missed event degrades to the polling that is still there underneath, now at a slow safety-net interval. The fast ticks that remain are the ones events cannot express: the live stream numbers while streaming, and a lingering display's teardown countdown. Four things had to be true for this to work, and none of them were. Each was found by measuring, not by reading: - Nitro's `localFetch` accumulates the response and only builds it when the handler returns, so nothing streams through the deployed Bun server. Three frames sent a second apart arrived together, three seconds late, when the upstream closed — and an SSE stream never closes, so nothing would ever have arrived. /api/v1/events gets its own route that hands back a web Response wrapping the upstream stream, which passes straight through. - Hydration mounts the app shell and discards it ~15 ms later. A subscription owned by that effect opened, closed, and never came back. It is a refcounted module singleton now, with a grace period so a remount re-attaches instead of reconnecting. - `getRouter()` runs more than once in the browser, and each call built its own QueryClient. The subscription held the first, the live pages read the second, and every invalidation went to a cache nobody was reading. One client per browser session; the server still gets a fresh one per request, which it must. - `invalidateQueries` only refetches queries that currently have an observer. An event means the HOST changed, so every cached copy is wrong whether or not something is watching it. Two features fall out of the same work: - **Automation** — a page for GET/PUT /api/v1/hooks. The host has run these hooks all along and the console never showed them, so the only way to see what your machine does when a stream starts was to open the config file. Writing one means writing a shell command the host will execute, so saving re-asks for the console password, like an update or an unreviewed install. - The Host page warns when another Moonlight-compatible server (Sunshine, Apollo) is running on the same machine. The host has detected this at startup for ages and reported it in /local/summary; nothing surfaced it. It is the most common reason a host looks installed and working but no client can reach it. Verified in a real browser against a mock host: three events drive three refetches of a query with no polling timer, the conflicts card names the intruder, the hook list and its dialog render, and the console reports no errors. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:20:10 +02:00
enricobuehlerandClaude Opus 5	55e01c1460	fix(web): stop shipping 7 MB of sound the console cannot play ... `@unom/ui/button` reaches `sound/defaults.js`, which resolves two game-UI sprite sheets with `new URL(…, import.meta.url)` at module scope — a 4.8 MB .wav and a 2.2 MB .mp3. Vite emitted both into the build, so they rode into the Windows installer and the .deb. The console never mounts UnomProviders, so no player is bundled and not one byte of it could ever be played. A build-time rewrite of those two expressions takes the asset payload from 8.2 MB to 1.5 MB; the login page and the button chunk are unchanged. Deleting the plugin is the whole revert if the console ever wants click sounds. Also: - `bun run dev` forwards the management bearer, so developing against a real host stops 401ing into a /login bounce that dev has no gate to satisfy. - `check-i18n` runs after `build`, not only inside `codegen`. It exists to stop a zero-message console shipping, and the CI job and the installer build both install with `--ignore-scripts`, so it had never once run where it mattered. - Bun's idle timeout goes from its 10 s default to 120 s. The host sends SSE keep-alives every 15 s, so anything long-lived proxied through the console was cut by us first — which the event stream is about to depend on. - The typecheck covers the Storybook config and preview. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:20:10 +02:00
enricobuehlerandClaude Opus 5	e30d94573a	fix(web): the logs come back after a host restart, and eight more that quietly lied ... The Logs page died permanently every time the host restarted — which the console's own update flow does. The host's log ring restarts at seq 1 while the page's cursor stays where it got to, and `GET /logs?after=8000` against a fresh ring is not an error, it is an empty page forever: no error, no dropped badge, stale lines on screen, and nothing short of a full reload to get out. A restart always breaks the poll first, so a failed poll now triggers a re-read from the start of the ring, and a page whose newest entry is older than what we hold is recognised as the sequence having restarted. Follow mode also stopped following at exactly the wrong moment. The autoscroll effect was keyed on the rendered row count, which pins at the 1000-row DOM cap — so once the log got busy enough to matter, the effect never re-ran again. It is keyed on the newest rendered seq now. And pausing now actually pauses: stopping the interval left React Query's focus/reconnect refetches landing, which evicted the very lines the operator had paused on. The rest: - A plugin could white-screen the whole console by registering `icon: "constructor"`. The icon map is a plain object, so the inherited key resolved to `Object`, which is truthy — the fallback never fired and React was handed `Object` as a component, from inside the app shell. - Saving a display arrangement deleted the saved position of every device that was not connected at that moment: the host replaces the whole map, and we only ever sent the displays we could see. - Flipping DDC, PnP or dedicated-game-sessions committed whatever unsaved edits the Custom block was holding, then cleared the "unsaved" badge so there was no trace of it. Those three apply on top of the SAVED policy now. - Saving the Custom block put the streamed-screen pin back to whatever it was when the form was seeded, undoing a change made in the picker below it. - "End now" on a running game calls the host's only stop, which ends EVERY live session; on a grace row with no app id it ended every waiting game. Both say so first now, when there is more than one to lose. - Edit and Delete were offered on library entries owned by a provider plugin, which the host refuses with 409 — silently. They are attributed instead. - An install whose first poll failed never polled again, and one whose host restarted spun forever with no way to dismiss it. - Submitting a second pairing PIN showed the previous attempt's "PIN sent" before a digit was typed, and the paired list it points you at never refreshed. - The streamed-screen picker claimed an env pin during every slow load, and rows that cannot be picked now look that way instead of silently eating the click. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:20:10 +02:00
enricobuehlerandClaude Opus 5	4575134c21	fix(web): one bad password from anywhere stops locking out the whole console ... The console's login throttle was documented as per-IP and was not. Nitro's `localFetch` hands the app a synthetic request whose socket has no `remoteAddress`, so `getRequestIP()` returned undefined for every request and every attempt was charged to one shared "unknown" bucket. Five wrong guesses from any LAN peer locked out everyone — including the operator, and including the update-apply route, which shares that budget. The Bun entry is the only place the real peer is knowable, so it now stamps it into a header (deleting any client-supplied copy first) and `peerAddress()` reads it back. Verified on a real build bound to 0.0.0.0: seven wrong logins from 127.0.0.1 lock 127.0.0.1 out, a different peer still logs in on the first try, and a request forging the header is charged to its real address. Also on the way through: - Installing an unreviewed package and adding a catalog source now re-ask for the console password, like applying an update already did. A 7-day session cookie should not be able to run new code on the host, and `store/install` with `accept_unverified` did exactly that through the generic passthrough. The gate sits at the trust boundary — adding a source, or a raw spec — not on every install from a source the operator already chose to trust. - The ui-credential denylist is matched against the normalised path too, so `/api//v1/...` and friends can no longer walk around it. - The console serves nosniff, a no-referrer policy, and a CSP that pins frame-ancestors, object-src and base-uri. - A plugin UI's response no longer re-emits the content-encoding that `fetch` already decoded (which made compressed plugin pages fail to load), no longer sets cookies on the console's origin, and OPTIONS reaches the plugin instead of being refused 405 by us. - An unreachable host reads as 502 on these routes, matching the passthrough, instead of a bare 500. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:20:10 +02:00
enricobuehlerandClaude Opus 5	6a4ffcb15c	fix(client): HDR stops leaking out of the stream and blowing out the console UI ... The gamepad/console UI looked right on launch, and wrong forever after the first HDR session: connect to an HDR host, disconnect, and the UI came back overblown with wrong colours. The UI is not its own renderer. It is a `pf_presenter::overlay::Overlay` composited into the SAME swapchain the stream used, and it draws plain sRGB with no HDR awareness at all — so the swapchain's colorspace decides how its pixels are read. `present` switches SDR↔HDR10 from the FRAME's colour signalling, and a UI-only present is `FrameInput::Redraw`, which carries none: the mode block is skipped entirely and nothing ever hands HDR10 back. The UI's sRGB mid-tones were then emitted as PQ code points, i.e. near-peak nits. `leave_hdr` drops back to SDR, called where the UI-only present already happens and gated on the existing `browse_idle` — Browse mode with no live connector, i.e. the UI owns the screen. That covers every route back to the UI rather than just the Ended/Failed arms, and it is guarded internally so idle iterations stay free. It also bails when minimized, which is load-bearing rather than an optimization: `recreate_swapchain` keeps the old swapchain at a zero extent, but `set_hdr_mode` would by then have rebuilt the CSC and overlay pipes against the SDR format — mismatched against live HDR10 images. `present` early-returns on a zero extent above its HDR block, so this was unreachable until a caller outside `present` existed. Deliberately not applied to the `resize_scrim` arm of the same present: that scrim is a mid-stream gap in a session that is still HDR, and flipping there would rebuild the swapchain twice per resize. Does not address the adjacent case: an overlay drawn DURING a live HDR session (the stats HUD, the resize scrim) is blown out the same way. That needs the overlay to PQ-encode when `hdr_active`; dropping to SDR is only correct here because the console UI shows exactly when no stream is live. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:08:38 +02:00
enricobuehlerandClaude Opus 5	43a631ea9c	fix(clients): a host that re-keys stops locking the client out for good ... Reinstall a host, wipe its ProgramData, or otherwise regenerate its identity, and the desktop clients refused it forever: "Host identity rejected — wrong fingerprint, or the host requires pairing", including immediately after a successful re-pair. There was no way out of it from the UI — the host list showed two cards for one address and forgetting the wrong one was a guess. `KnownHosts::upsert` matches on the FINGERPRINT, which is what lets a host that moved address keep its record and everything the user set on it. A host that changed identity matched nothing, so pairing appended a SECOND record for an address that already had one, and `find_by_addr` returned whichever came first in the file — the dead one, every time. Trust decisions (PIN ceremony, delegated approval, TOFU accept, headless pair — all funnelled through `persist_host`, plus the Windows shell's two direct upserts) now go through `upsert_trusted`, which retires any OTHER record for that address. Retired means DELETED, not demoted: a record whose certificate the host no longer holds cannot connect, so keeping it only reproduces the two- cards-one-address confusion this fixes. What described the box rather than the identity — its MAC, its OS chain, the bound profile, the pinned cards, when it was last used — moves onto the record that survives, so a reinstall doesn't quietly cost the user their setup. What described the dead identity does not: `paired` and `clipboard_sync` are decisions about one specific certificate and have to be made again for a new one, and the retired record's stable id stays retired (a deep link written from it falls through to the `host=` recovery the link grammar already specifies). Only trust decisions may retire a record. The wake path's address re-key and every learn-from-advert path stay on plain `upsert`: those are driven by unauthenticated mDNS, and letting an advert delete a saved host by claiming its address would trade this bug for a much worse one. A plain reconnect still fails closed on a pin mismatch — nothing here changes what the pin is checked against. Stores that already hold the duplicate recover on the next connect, not at load: which of two records is live isn't knowable at load time and guessing wrong would throw away the good one. Instead `find_by_addr` stops being positional — a real fingerprint beats a placeholder, and among real ones the newest trust decision wins, since records are only ever appended by one. The next successful pair then cleans the store up for good. Every lookup that picks a pin or a per-host decision for a connect now goes through it (the session's pin and clipboard read, the deep-link resolver, orchestrate's plan, both speed tests, the CLI's --wake and --library, which had also been ignoring the port), and an advert's learned MAC/OS lands on the record it identified rather than on a stale namesake that merely came first. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-01 00:00:49 +02:00
enricobuehlerandClaude Opus 5	6af067da2d	fix(client): the bottom rows stop smearing — the decode pool is taller than the picture ... A user's 1080p stream repeated its last row of pixels over the final few rows, so the image looked stretched at the bottom. The Vulkan-Video CSC pass sampled the decoded planes with the fullscreen triangle's normalized 0..1 UVs, but its render target is built at the CROPPED frame size. Those are not the same rectangle: FFmpeg sizes the decode pool from `avctx->coded_*`, and H.264 codes `16 * mb_height` — so a 1080-row picture decodes into a 1088-row pool. Destination row 1079 sampled source row ~1087.5, dragging the 8 alignment rows into view and squashing the picture 0.7%. Encoders fill that padding by replicating the last picture line, which is why it reads as a smeared bottom row rather than garbage. Confirmed on glass (.173, RTX, H.264 1080p, vulkan-video): Vulkan Video first frame width=1920 height=1080 pool_w=1920 pool_h=1088 `VkVideoFrame` now carries the pool extent and `record_csc` takes a `uv_scale`, written to the shader's `params.zw` — which the CSC shader already reserved for a use like this. The chroma cositing offset is unchanged and stays correct: `textureSize` reports the pool width, which is the space the scaled UV is already in. Only the Vulkan-Video path passes a scale below 1.0. D3D11VA already clamps this in its VideoProcessor blit (the same bug, seen as a green bar there because DXVA padding is uninitialized rather than replicated); dmabuf imports its planes at the crop over the real stride; PyroWave allocates its ring at exact stream dims. Apple and Android crop at the OS layer. Every other call site passes [1.0, 1.0], so the change is inert there. Also adds a one-time first-frame layout log mirroring the D3D11VA one, so the frame-vs-pool gap is visible in the field instead of having to be re-derived from FFmpeg internals. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 23:40:33 +02:00
enricobuehlerandClaude Fable 5	9f72a3b6ad	feat(host): HDR and 4:4:4 stop being mutually exclusive on Windows ... An HDR display cost you full chroma: the IDD-push capturer's only 10-bit output was P010, so a session that negotiated 4:4:4 on an HDR desktop was converted to 4:2:0 at capture time — *after* the Welcome had already told the client 4:4:4. The client believed it (nothing on the wire contradicts a Welcome), and the new chroma tag in the stats overlay is what finally made the discrepancy visible. Everything except the source was already in place, which is why this is small: the NVENC config layer has stamped `FREXT` + `chromaFormatIDC=3` + `pixelBitDepthMinus8=2` — HEVC Main 4:4:4 10 — with a unit test since the 4:4:4 work landed, `PixelFormat::Rgb10a2` already maps to `ABGR10` and already counts as a full-chroma input, and the desktop client learned the 10-bit 4:4:4 Vulkan pool format in 74863c96. The one missing piece was a capture format that keeps 10 bits AND full chroma. `HdrRgb10Converter` is that piece: one full-res pass from the FP16 scRGB desktop to packed `R10G10B10A2` in BT.2020 PQ, reusing the P010 shader's `scrgb_to_pq2020` verbatim so both HDR outputs share bit-identical colour math — it simply stops before the RGB→YUV matrix, the studio-range squeeze and the chroma decimation. NVENC then does the CSC to YUV 4:4:4 itself under FREXT, exactly as the SDR BGRA passthrough has always done at 8 bits. No swizzle is involved and that is worth stating, because it looks like it should be: NVENC names packed formats from the MSB down, so its `ABGR10` (A2B10G10R10) puts R in the low 10 bits — bit-identical to DXGI `R10G10B10A2_UNORM`. It is the same relationship the proven SDR pair relies on between DXGI `B8G8R8A8` and NVENC's `ARGB`. The honesty gap closes as a consequence: `capturer_supports_444` no longer has a depth it cannot serve, so the chroma resolved before the Welcome is the chroma the wire carries. AV1 is deliberately untouched — Range Extensions are HEVC-only and no consumer encoder does AV1 4:4:4. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 23:06:44 +02:00
enricobuehlerandClaude Fable 5	47eb8c9f6f	fix(windows): a web-console deploy that half-succeeded stops reporting success ... Found by investigating a console that had been serving errors on .173 for hours while every health check said HTTP 200. Nitro's `entry.mjs` imports its sibling chunks by CONTENT HASH, so a `.output` that mixes two builds is not degraded — it is dead: bun answers every page with a `ResolveMessage` JSON body ("Cannot find module ../_/router-<hash>.mjs") under a 200 status. Two defects here let exactly that ship and then hid it: * The pre-copy `Remove-Item` used `-ErrorAction SilentlyContinue`, so a removal blocked by a still-running bun was swallowed and `Copy-Item` merged the new build into the old tree. (Reproduced live: an older task-based copy of this script, run against the now supervised-child host, tried `schtasks /end` for a task that no longer exists, never stopped the service, and so could never unlock the files.) The removal is now verified and refuses to copy over a tree it could not clear. * The success probe read only the status code, so it reported a healthy console for a server that serves nothing but an error. It now checks that `/login` actually returns HTML, and says so loudly when the body is a module-resolution error instead. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 22:40:26 +02:00
enricobuehlerandClaude Fable 5	2ce0bea830	feat(client): desktop phase-locked capture, a real display volume on Windows, and the console's missing rows ... The cross-platform half of the gap sweep: * Phase-locked capture reaches the DESKTOP clients (it shipped on Apple/Android only, though the desktop presenter has the best latch signal of all — true on-glass stamps via VK_KHR_present_wait). The presenter's 1 Hz fold publishes a latch grid (anchor = last on-glass instant; period = min positive present spacing, capped by the display mode's refresh so an arrival-paced sub-panel-rate stream can't claim a slower grid); the session pump folds every AU's arrival stamp against it with the SHARED `phase::circular_latch` statistic and sends the ~1 Hz PhaseReport (1 ms uncertainty — reference-client parity). The cap is advertised only when present timing is real (`VulkanDecodeDevice::present_timing` gates `SessionParams::phase_lock`), and the host's applied grid offset from the 0xCF tail is logged so an on-glass run can watch the controller engage. * `Hello::display_hdr` stops being hardcoded `None`: Windows reads the panel's colour volume from DXGI (`IDXGIOutput6::GetDesc1`, the `--window-pos` output else the primary, advanced-color outputs only, gated on the HDR setting) so the host's virtual-display EDID matches the real glass. Linux keeps the EDID defaults — no portable Wayland/X11 query exists — and the comment now says exactly that. * The console settings screen (the ONLY editor in Gaming Mode) learns the rows it was missing: render scale, full chroma 4:4:4, invert scroll, capture system shortcuts, fullscreen-on-stream, auto-wake and the game-library toggle. * A spec-run session's device picks (GPU adapter, speaker, microphone) now come from the `--resolved-spec` instead of a raw Settings load — the last store read the spec path still owed (§5), and what would make those fields profileable. * `session_args()` documents why the GTK/CLI spawners pass no `--window-pos` (Wayland exposes no global coordinates to read and SDL can't apply them). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 22:05:24 +02:00
enricobuehlerandClaude Fable 5	fd75e66041	feat(windows): the shell spawns from the shared brain, and links, tests and pairing stop losing things ... Windows-shell parity gaps from the 2026-07-31 sweep, closed: * The spawner goes through the shared brain: `ConnectPlan::for_target` → `session_args()` + a written `--resolved-spec`, replacing the hand-assembled argv that meant Windows sessions ALWAYS took the compat path (re-resolving every setting from the stores — the drift orchestrate.rs documents as a trap) and that any field added to the spec was silently Windows-dead. Fullscreen now comes from the plan's effective settings (profile-aware) instead of a caller argument, the spec temp file is cleaned up at exit, and the reader finally parses the `{"window":…}` line so the SPAWNER persists the match-window size (§5) instead of the renderer's load-modify-save fallback. * A deep link to an unpaired host runs the trust ceremony instead of refusing: the Pair screen opens seeded with what the link CLAIMED — name shown as claimed, fingerprint carried, and the launch/profile surviving the detour (`Target` grew a `launch` field for exactly this). GTK parity; a shared link was a dead end here before. * The speed test learns the Ask tier: a bound host whose profile INHERITS bitrate now offers both "Set as default" and "Set in profile" instead of silently creating a profile override. The global write (and the forwarded-controller handler) also rebase on the file before their whole-struct saves — two more stale-snapshot writers. * The Controllers card shows the detected-pad inventory (read-only, with the Steam-Input-virtual note) — the fastest answer to "is my controller even detected?", present on GTK all along. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 22:05:05 +02:00
enricobuehlerandClaude Fable 5	698925a036	fix(clients): settings saves stop reverting each other, Windows gets audio pickers, and a game link launches its game ... The rest of the client-gaps handoff, plus what a parity sweep surfaced: * Every whole-file settings save rebases on the file first — the GTK dialog close and its two speed-test apply arms, the Windows per-control commit, the console screen. The file has five writers and no merge (profiles.rs documents the debt); saving a shell-lifetime snapshot silently reverted whatever another writer stored meanwhile, most visibly the spawner-persisted match-window size (item 4). * Windows honors the Speaker/Microphone picks: `audio_wasapi` grows endpoint enumeration (on its own MTA thread — UI threads are STA) and resolves PUNKTFUNK_AUDIO_SINK/SOURCE as endpoint ids, falling back to the default when the picked device is gone; the settings page gets the two rows (defaults scope, "(not detected)" like the GPU row). `speaker_device`/`mic_device` stop being Linux-only fields (item 5). * A punktfunk:// link with `launch=` opened a plain desktop session on Windows — the id was parsed, validated, planned, and dropped at the last hop. It now rides `initiate_launch` (plus a waking variant for the dial-first path). Linux always forwarded it. * The console UI offered "VAAPI" on Windows — a dead option there that also hid d3d11va, the actual Windows hardware path. The decoder list is per-OS now. * The Windows gamepad picker learns "Steam Deck" (the GTK picker had it; the host-side pad has always existed). * Doc fixes: gpu.rs named a nonexistent env var (PUNKTFUNK_ADAPTER → PUNKTFUNK_VK_ADAPTER), and session/Cargo.toml claimed video decode is Linux-only while explaining what the ARM64 leg drops. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 21:21:26 +02:00
enricobuehlerandClaude Fable 5	74863c96b3	feat(client): 4:4:4 can stay on hardware, and the overlay says what you actually got ... Two halves of the same honesty problem (client-gaps handoff items 1+2, done together as the handoff asked). The presenter learns full chroma: `vkframe_plane_views` accepts the 2-plane 4:4:4 pool formats (8-bit, and the 10-bit 3PACK16 sibling) — what NVIDIA's Vulkan Video reports for HEVC RExt decode — with the accepted set extracted into `vkframe_plane_formats` and pinned by a decision-table test. The CSC shader needed nothing: its 4:2:0 siting correction already self-disables when the plane widths match. The VAAPI leg gets the same treatment (NV24 in `drm_fourcc_for` and the dmabuf import, full-size chroma plane), and the Vulkan decoder's sw-format gate admits NV24/P410. 3-plane 4:4:4 stays rejected — it needs a third CSC binding — and demotes cleanly like every other unsupported format. Design call (the handoff's fork, argued here as requested): (B)+(C), not (A). No capability probe gates VIDEO_CAP_444 — software decode is the guaranteed display floor on both OSes (swscale → RGBA), the decoder ladder demotes on its own, and a probe-gated bit would turn the switch inert on exactly the boxes that rely on the fallback. What (A) wanted from a prediction, the overlay now delivers as ground truth: The Detailed tier prints the encoder's target next to the measured rate — `19.4 Mb/s · target 20 Mb/s (auto)` — and the resolved chroma, `4:4:4→4:2:0` when the host declined the ask (mirroring `HDR→SDR`). The target is live: `NativeClient::current_bitrate_kbps()` mirrors every BitrateChanged ack, so an Automatic session's ABR re-targets are visible as they move. This is the figure whose absence let the settings-drop bug (9c5af8d7) ship four releases — measured goodput alone cannot distinguish "the encoder is capped at 20" from "my 200 Mb/s grant met a cheap scene". Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 21:21:10 +02:00
enricobuehlerandClaude Fable 5	5926306a4c	feat(windows): the web console becomes a supervised child of the host service ... Three silent console outages in one week (0x1 / 0xFFFFFFFF / 0x41306), each a different proximate cause of the same structural defect: the console's lifecycle was owned by Task Scheduler — one best-effort start per boot/logon/install, no retry on a plain non-zero exit, no watchdog — while the product already shipped a real supervisor. The service now supervises the console as a second child slot: plain session-0 spawn (suspended → own no-breakaway kill-on-close job → resume), started only once the host has written mgmt-token + cert.pem + key.pem (the cert race dies by construction), secrets read from their files at every respawn, bun's stdout finally captured in logs\web.log, doubling backoff 0.5s→60s that never gives up. Session switches never touch it; a service stop takes it down via the job. The PunktfunkWeb task is retired: web setup slims to password + legacy task delete + firewall, the 127-line web-run.cmd batch supervisor is deleted, an [InstallDelete] entry reaps the stale copy, and service install now sets SCM crash-recovery actions (restart 1s/5s/60s) since the console rides on the service process. StopBunRuntimes stays for the scripting runner + the one migrating upgrade. Design: punktfunk-planning design/windows-web-console-lifecycle.md Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 20:16:19 +02:00
enricobuehlerandClaude Opus 5	9c5af8d7e1	fix(clients): the settings you chose reach the stream again, and four more that never did ... Since spec mode (`f32c3aaa`, shipped in 0.22.0) the GTK shell has handed the session a `--resolved-spec` built from `Settings::default()`. A session running from a spec performs ZERO store reads by design, so every stream since has run at the defaults: `bitrate_kbps: 0` reaches the host, which reads it as its 20 Mbps fallback — the field report this starts from, "my bitrate seems to be stuck at 20 MBPS" on 0.22.3 — and with it the resolution, refresh, render scale, codec, decoder, HDR, 4:4:4, audio channels, mic, touch/mouse mode, invert scroll, stats tier, match-window and gamepad type. Profiles never applied at all: the spec's `profile` was None, and spec mode ignores `--profile`. The tell in the wild is that the GPU and audio-device pickers kept working — the session reads those three off disk into env vars before it reads the spec. The plan carried a comment explaining that `settings` "carries only what the argv needs (the fullscreen flag)". That was true when it was written and stopped being true one commit later, in another file. `ConnectPlan::for_target` answers that shape of bug: a front-end holding its own request type resolves through the same helper the session's compat path uses, so there is no hand-built `Settings` left to go stale. The GTK shell's `fullscreen_on_stream` parameter goes with it — that is a tier-P field, and a shell-read global was beating a profile that set it. The Windows shell was never affected (it spawns with no spec) but had the same fullscreen-vs-profile bug, so it moves onto the resolver too. The audit that followed found four more settings stored, rendered in two UIs, and read by nothing: - `enable_444` never became `VIDEO_CAP_444`. "Full chroma (4:4:4)" is announced in the 0.22.0 notes for Linux and Windows and did nothing on either; only Apple advertised the bit. The host already gates it on its own policy, its capturer, HEVC and a real GPU probe, and answers the resolved chroma in the Welcome before we build a decoder — the client only has to ask. There is no desktop decode probe (Apple has `Stage444Probe`), but the presenter bails cleanly on a plane format it doesn't know and demotes to software, so the downside is a slow decode, not a broken one. - `session_params` picked the HEIGHT fallback off `settings.width == 0`. - `cli::exec_session` dropped `--profile` from its forward list, so `punktfunk --connect … --profile Work` from a script or a Decky wrapper streamed with the host's binding instead. - `ResolvedSpec::write_temp` named the spec by the SPAWNER's pid alone, so a cancelled connect and the retry behind it shared one path — and the first child's exit deleted the file the second was still starting up to read. The regression test asserts the plan carries the profile-overlaid bitrate and that the spec equals it. On the old code both are 0. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 19:32:51 +02:00
enricobuehlerandClaude Opus 5	3594bc029e	fix(host): a host with no host.env streams a screen, not a test pattern ... `PUNKTFUNK_VIDEO_SOURCE` had no default, and unset fell through to the synthetic test pattern. That was invisible while the systemd unit made host.env mandatory — you could not start the host without the file, and every copy of the file sets `virtual`. Now that the unit treats host.env as optional (020306b5), unset is reachable, and a packaged Linux install with no host.env would serve a test pattern to Moonlight clients. Default it to `virtual`, the flagship per-client virtual output — which is what every setter in the tree already says: packaging/bazzite/host.env, packaging/kde/host.env, both host.env.example files, the host.env the Windows installer generates, and scripts/bench/gpu-stream.sh. Nothing sets `synthetic` and nothing relied on unset. `synthetic` stays reachable by naming it, since any unrecognised value lands in that arm. Only one of the three readers changes behaviour: stream.rs's `== Some("virtual")` now matches when the variable is absent. gamestream/mod.rs already folded None and Some("virtual") into the same `_` arm for the HDR capability probe, and rtsp.rs only tests for `portal`. The native punktfunk/1 plane never read this — it always builds a virtual display — so this only ever affected GameStream/Moonlight sessions. host.env.example's header no longer claims this key is the one non-optional setting; the file is now overrides only, and the host runs without it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 19:31:36 +02:00
enricobuehlerandClaude Opus 5	fd3c54bd43	feat(client): "Capture system shortcuts" finally decides where Alt+Tab goes ... The toggle has been stored, profileable and rendered in two settings UIs since profiles landed, and nothing read it. Windows grabbed the keyboard whenever input was captured, setting or no setting; Linux never grabbed at all, because the grab sat behind `#[cfg(windows)]` with a comment deferring the compositor story to "the shells" — which never picked it up. `Settings.inhibit_shortcuts` now reaches the presenter and gates the grab, on both platforms. SDL3 already maps `SDL_SetWindowKeyboardGrab` onto `zwp_keyboard_shortcuts_inhibit_manager_v1` on Wayland and `XGrabKeyboard` (plus `_XWAYLAND_MAY_GRAB_KEYBOARD`) on X11, so dropping the cfg is the Linux fix. Capture state still gates it, so releasing input hands the chords straight back, and the desktop mouse model never grabs. A compositor with no shortcuts-inhibit global says so once instead of failing silently — at debug under gamescope, which has no shortcuts to inhibit in the first place. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 19:27:33 +02:00
enricobuehlerandClaude Opus 5	020306b5ac	fix(packaging,host): a fresh Linux install can start, and the comments stop lying ... Fallout from the documentation sweep: verifying doc claims against the code turned up defects in the code and the shipped templates. Mostly comments that describe behaviour we no longer have — which is how the docs went wrong in the first place, since someone reads the comment and writes the page. The one that mattered: a fresh deb/RPM/Arch install could not start the host at all. The unit's `EnvironmentFile=` had no `-`, making host.env mandatory, and no package creates it — all three ship only the templates under /usr/share and the postinst merely prints the copy command. So `systemctl --user enable --now punktfunk-host` died on "Failed to load environment files". Every field in HostConfig::from_env resolves through unwrap_or/filter/None, so absent means all defaults, exactly like a hand-run `serve`; the Nix module already wrote it as `-${environmentFile}`. The Deck installer's own generated unit gets the same prefix for the case where an operator later removes the file. Shipped templates: PUNKTFUNK_SECURE_DDA is read by nothing (DDA/WGC are gone; IDD-push is the sole Windows capture path and the secure desktop is unconditional), so it stops being written into a fresh host.env; PUNKTFUNK_INPUT_BACKEND offered a `uinput` value that does not exist and omitted `kwin`, which is what a KDE session actually resolves to; PUNKTFUNK_RENDER_ADAPTER no longer claims to pick a "Desktop-Duplication" GPU. Comments corrected rather than deleted, since each explains a real why: PUNKTFUNK_10BIT is default-on with explicit-off grammar, not an operator opt-in; GNOME reaches EIS through Mutter's direct RemoteDesktop API, so it needs no portal approval and is headless-capable; and the host does not run in session 0 — the service is the session-0 supervisor and the host runs as SYSTEM in the interactive console session, which is why game_term has to bind the input desktop at all. packaging/bazzite/update-punktfunk.sh is now installed to /usr/share/punktfunk/, so the command the docs promised exists. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 18:46:38 +02:00
enricobuehlerandClaude Fable 5	5807d3a8a6	fix(tools): the loss harness catches up with seal_streamed_chunk's slice flag ... 49bc93cd grew seal_streamed_chunk a slice_end parameter and updated every caller except this one — the Linux clippy leg has been red since (run 10615+). false = the legacy full-FEC-block granularity the harness always exercised; its loopback client never advertises the P2 slice wire. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 18:16:40 +02:00
enricobuehlerandClaude Fable 5	2a6bf3c421	fix(vdisplay/gamescope): the takeover stops a live session's DM on every flavor — the mask never stopped SDDM's relogin ... The managed takeover masked gamescope-session-plus@*.service and trusted the mask to hold SDDM's Relogin=true loop at bay. On images whose sddm session helper execs the session script directly (/etc/sddm/wayland-session gamescope-session-plus steam — f43 bazzite-deck), the relogin never touches the unit: SDDM relogged in ~3x/s for the whole stream, each attempt a full bash --login session start failing against the managed instance. Live on the .41 VM (2026-07-31): 328 forks/s, load 6+, 1481 logind sessions in 8 minutes, the journal flooded past its own rotation — and a 5070 Ti that "could not hold 240fps". A DM that drove a LIVE gaming session is now stopped for the stream's duration on every flavor (the fragile-flavor machinery — lingering guard, pkexec dm-helper, restore via reset-failed+restart, crash-persisted state — already existed and is reused as-is; a pure dm_plan() derives the decision and is unit-tested). The flavors now differ only in the degraded mode when the stop is impossible: SDDM falls back to mask-only (the storm tax, but Steam stays protected — never attach), fragile DMs still fail the takeover into the attach degrade. The mask stays as belt-and-braces for the window before the stop and for images that do route the relogin through the unit. Verified: scripts/xcheck.sh linux clippy (-D warnings, --all-targets) clean; pf-vdisplay suite 125/125 on Ubuntu 26.04. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 17:59:00 +02:00
enricobuehlerandClaude Fable 5	957cf7781c	feat(apple): a Pencil near the glass pins the panel at the link ceiling ... UIKit delivers Pencil events at the PANEL's cadence, and the deadline link's rate hint pins the panel to the stream rate (min = preferred = stream Hz, deliberately — the anti-idle-stall floor). Net effect: a 60 fps stream on a 120 Hz iPad silently halved pencil sampling, 8.3 → 16.7 ms per event batch — exactly the workload (drawing) that feels it most. FrameRateHint gains a boost that lifts min/preferred to the range ceiling while a Pencil is in range (hover or contact): PencilStream surfaces proximity transitions from its emit() choke point, the view controller debounces release by 2 s (edge-of-canvas hover flicker must not thrash the link), and Stage2Pipeline/SessionPresenter stage it like the rate hint — applied from the link's own thread, no-op under arrival/glass pacing. Presents still pace at stream rate (extra updates vend into the newest-wins stash), so the cost is empty link wakes scoped to proximity. pf.present logs engage/release for on-glass verification. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 17:41:46 +02:00
enricobuehlerandClaude Fable 5	7cf71dd218	feat(clients): the Apple deadline presenter reports its latch phase ... Phase-locked capture had no client half on Apple — the host's v3 controller (grid-locked submits, coherence-gated engage) shipped with only the Android reporter feeding it. Now the stage-4 link thread flushes the same v2 circular arrival-phase statistic at ~1 Hz: - PhaseReporter (Stage2Pipeline): the decode callback deposits per-AU reassembly-completion stamps, the CAMetalDisplayLink update deposits the latch grid (period = window-min of update spacing), and the flush ports punktfunk_core::phase::circular_latch verbatim — a period-smeared Wi-Fi link reads coherence ≈ 0 and the host correctly never engages; a wired link opens the gate. Binds/unbinds per session like DecodeReport. - PunktfunkConnection.reportPhase wraps the existing ABI entry point. - Hello honesty: iOS/tvOS advertise CLIENT_CAP_PHASE_LOCK (macOS stays without — the stage-2 arrival presenter has no latch grid), Android now sets the bit its reporter already earned, and the ABI grows the PUNKTFUNK_CLIENT_CAP_PHASE_LOCK mirror const (header regenerated). Advisory in v1: the host arms on report receipt. - Stage-3 doc comment no longer calls itself the tvOS default (stage-4 took that over in the 2026-07 rebuild). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 17:41:46 +02:00
enricobuehlerandClaude Fable 5	86d4b36bfa	chore(core): the Apple recv path documents its unsafe blocks ... clippy -D warnings only lints this cfg(target_vendor = "apple") file on a Mac, which CI never does — the three recv/recvmsg_x blocks predate the undocumented_unsafe_blocks sweep and kept every local Apple-side clippy run red. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 17:41:15 +02:00
enricobuehlerandClaude Fable 5	c002ca8746	fix(clients): pen batches split at the wire cap and the heartbeat survives tracking mode ... Three drawing-path defects on the pen clients: - The Apple in-range heartbeat was re-armed on every emit (~120 run-loop mutations/s during a stroke) and lived in .default run-loop mode only — a tracking-mode excursion >200 ms with a stationary pen crossed the host's force-release failsafe and dropped the held stroke. Now one long-lived 50 ms timer in .common mode, resending only after ≥50 ms of send silence. - Both clients TRUNCATED an over-8-sample coalesced run instead of splitting it into consecutive batches (the send_pen contract): Apple suffix(8) dropped the oldest samples, the Android JNI clamped count. An over-cap run means the UI thread hitched — exactly when dropping stroke geometry hurts most. Apple splits in emit(); the Android JNI loops send_pen over ≤8-sample chunks (Kotlin's per-emit ceiling is now 64 = a >250 ms stall). - The iOS letterbox mapper did a lock+FFI currentMode() read per coalesced sample on the main thread, contending the ABI lock the batch send takes next — now a 250 ms TTL cache (mid-stream requestMode still tracked). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 17:41:15 +02:00
enricobuehlerandClaude Opus 5	d383161723	docs: the docs catch up with five releases of shipped work ... ~1150 feat/fix commits landed since v0.19 and the docs drifted badly. This is a full sweep of every page against the code as shipped: ~280 verified corrections, nine new pages, and one deletion. The worst of what was wrong: the quickstart's five-minute path could not work (`serve` never started the web console, so step 3 had no PIN to read); every packaged Linux host runs `serve --gamestream` while security.md told readers to leave GameStream off; HDR was documented as Windows-only; `PUNKTFUNK_SECURE_DDA` was documented as a working knob that nothing reads; `PUNKTFUNK_INPUT_BACKEND` listed a `uinput` value that does not exist and named libei for KDE instead of kwin; README linked three pages deleted on 2026-07-05; and the rpm-ostree update command pointed at a script no package installs. Completeness: about half of what shipped since v0.19 had no page at all. New: support-matrix (what works where, from 217 verified capability cells), input (mouse/touch/pen — and the in-stream chords, so the docs finally say how to get your mouse back), client-settings, profiles-and-links, game-library, clipboard, wake-on-lan, hdr, uninstall. Updating existed but had zero inbound links. status.md is gone: its facts moved into the support matrix, its shell stays as a redirect so the public URL does not 404. roadmap.md is themes now, not a feature checklist — checkboxes are what rotted. Debian is no longer claimed. The .deb's Depends resolve against Ubuntu images, nothing in CI builds or tests Debian, and Debian 12 is below the glibc 2.39 floor. The `debian` in the repo URL is the package format. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 17:37:06 +02:00
enricobuehlerandClaude Fable 5	49bc93cd20	feat(encode/windows): the sync NVENC session reads slices out mid-encode ... The Windows direct-NVENC session gets the Linux backend's sub-frame chunked poll: a doNotWait sampling lock cuts each completed slice out of the bitstream while the frame is still encoding, so the send loop's streamed slice wire starts shipping an AU's front before its tail exists. The default retrieve mode on Windows is synchronous, which is exactly the mode the sampler requires - the async opt-in keeps its whole-AU path and the chunked latch drops away when it is active. The session's slice count now honors the negotiation instead of pinning one: the direct-NVENC default of 4 clamped by the client's ceiling, so a single-slice client (Amlogic-class decoders that never advertised multi-slice) keeps today's wire shape and a multi-slice client gets real boundaries to cut at. The pending queue carries a submit-time IDR hint because an AU's early chunks ship before the driver reports the picture type; sub-frame write itself stays env-gated (PUNKTFUNK_NVENC_SUBFRAME=1) until the Windows on-glass A/B validates it. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 17:34:31 +02:00
enricobuehlerandClaude Fable 5	780791ed81	feat(android): the presenter's latch margin starts at zero and earns its width ... The 2.5 ms submit margin ahead of expected present assumed SurfaceFlinger latches well before the vsync. On-glass (NP3, 120 Hz) that lead is not needed: with the margin at zero every release still made its vsync (paced=0 across full sessions) - meaning the constant was 2.5 ms of pure display latency on every frame, and it was quantizing away exactly the readiness gains the slice-overlap pipeline just bought. e2e on the Linux-host pairing dropped from 22-24 ms to 14-18 ms. The margin is now adaptive instead of assumed: it starts at 0 and only widens (+500 us per 1 Hz window, capped at the old 2.5 ms) when the paced counter shows real latch misses - one-way per stream, so a margin that proved necessary is never re-gambled mid-session. A device that needs lead converges within seconds; a device that doesn't keeps the full win. debug.punktfunk.latch_margin_us (0..=8000) pins the margin for rebuild-free sweeps, and the presenter logs the resolved mode at stream start. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 17:34:31 +02:00
enricobuehlerandClaude Fable 5	4240b76182	feat(android): slices feed the decoder as they arrive, not when the AU closes ... The decode loop used to hold every access unit until its last wire packet landed. With slice-progressive delivery (frame_parts) each newly contiguous piece now goes straight into MediaCodec under BUFFER_FLAG_PARTIAL_FRAME, the closing piece drops the flag, and the decoder chews the front of the frame while its tail is still on the wire. Feeding partial input means owning its failure modes without a codec flush: a broken sequence (dropped piece, orphan, oversize) closes the dead AU with an empty non-partial buffer at its own pts, arms the re-anchor freeze so the concealed output never reaches glass, and requests a recovery keyframe - the same machinery ordinary loss already rides. Per-AU accounting keeps its units: the RFI gap detector notes an AU once, and the HUD stamps, host/network split and the phase-lock arrival sensor ride only the completing delivery. The opt-in is decoder truth and loop truth: every decoder this device would use must pass FEATURE_PartialFrame, and only the async loop may see parts - the legacy sync loop feeds whole AUs and stays that way. Smoke-checked on-glass (NP3 vs the Windows host): byte-identical degenerate path, presenter profile unchanged. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 17:34:31 +02:00
enricobuehlerandClaude Opus 5	de8430097e	chore(clients): the bundled licence notices catch up with the root file ... The Apple and Android apps carry their own copy of THIRD-PARTY-NOTICES.txt and show it on the acknowledgements screen. `7fc2775f` refreshed the root file but not the copies — running the python generator directly skips the sync `scripts/gen-third-party-notices.sh` does — so they had drifted to a 531-crate snapshot that predates the whole vendored-source section. That section is where the OS marks' attribution lives, so both apps have been shipping Font Awesome's CC BY 4.0 icons with no attribution visible at all. Re-synced, which also carries the Bazzite Apache-2.0 notice the previous commit adds. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 14:17:02 +02:00
enricobuehlerandClaude Opus 5	5520167958	feat(clients): the OS marks tell gaming distros apart, and Windows looks current ... Three things were wrong with the host-card OS icons. The Windows mark was Font Awesome 5's, which is still the Windows 8/10 flag with the perspective skew — dated next to the flat four-pane mark Microsoft has shipped since Windows 11. No icon set has the current one (Simple Icons carries no windows/microsoft slug at all), so it is drawn here: four equal squares at the authentic 11.377 + 1.246 proportion. The Decky plugin was pulling FaWindows straight from react-icons, so it now inlines the masters like the web console does, or it would have kept the old flag regardless. Bazzite, CachyOS and Nobara collapsed onto their family's mark. The host already advertises the full chain, so this is purely missing art: all three now ship a leaf mark, because "a Bazzite box" and "a Fedora box" are different machines to the person reading the card. CachyOS and Nobara come from Simple Icons; Bazzite has no icon anywhere, so its "b" is lifted out of the project's own badge (Apache-2.0, attributed). On Android every non-square mark was stretched. A VectorPainter maps the viewport onto the ImageVector's default size with independent x and y scales, so declaring a 448x512 Tux as 24x24 dp squashed it — silently, no crash, no warning. The longest viewport edge now sets the 24 dp box and the other follows the ratio, which is what Icon()'s ContentScale.Fit expects. A unit test pins the invariant; every other client was already correct. Also: scripts/gen-os-icons.sh replaces the undocumented hand-run pipeline that turns a master into the GTK symbolic SVG, the Windows PNG and the Apple template PDF. It reproduces the committed artifacts byte-identically. Verified: web and Decky typecheck, Decky bundles, Android compiles and its tests pass, PunktfunkKit builds, osinfo's tests pass. Not verified on glass, and the GTK/Windows client crates do not build on macOS. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 14:17:02 +02:00
enricobuehlerandClaude Fable 5	f4f83202cb	feat(core/client): an AU's prefix reaches the decoder while its tail is on the wire ... Delivery used to be all-or-nothing: the decoder saw byte 0 only after the last packet of the AU landed, so the whole transmit time sat in front of decode. With the slice-streamed wire (previous commit) blocks now arrive addressable, and a client can opt in (connect's new frame_parts) to receive each AU's newly-contiguous prefix as Frame::part pieces - offset tiling, first/last marked, the completing push carrying only the suffix. A PARTIAL_FRAME-capable decoder then chews slices concurrently with the remaining network transfer. The reassembler walks a per-frame cursor over successfully-completed blocks (failed FEC reconstructs don't advance it), coalesces blocks that finished out of order into one part, keeps probe filler whole, and stops short of the final block so the zero-padded tail still trims at completion. Whole-frame consumers see byte-identical behavior - parts never flow without the opt-in, and never on PyroWave (its newest-wins draining assumes whole AUs). Per-AU accounting keeps its units: OWD/ABR feeds, the inter-arrival series and the clock-based jump-to-live detector only count completing deliveries, and FrameChannel::depth() counts AUs so a part-rich queue can't trip jump-to-live at a fraction of the real backlog. The consumer contract (gap or orphan part = AU lost: abandon, flush, resync on the next first) is documented on FramePart; the C ABI keeps parts off until PunktfunkFrame can express them. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 14:14:46 +02:00
enricobuehlerandClaude Fable 5	440cb8d1ec	feat(core/wire): streamed AUs cut blocks at slice boundaries, not at 5.5 MB ... The streamed-AU path only ever flushed a block when a full FEC block's worth of bytes accumulated - at real bitrates a frame finished encoding before that, so every AU degenerated to one tail-heavy send and the overlap the sentinel wire was built for never happened. Now a slice boundary flushes every whole shard (floored at MIN_STREAM_BLOCK_SHARDS so per-block parity stays economical), which means blocks are variable-size and can no longer be addressed by the uniform block_index * K_max formula. USER_FLAG_SLICE_STREAM marks such frames on every packet: sentinel blocks reuse frame_bytes as their shard-aligned base offset, the final block's base derives from the totals, and the receiver pins/validates positionally (sentinels must sit strictly below the final block's base; a mixed-flag or out-of-range header is dropped before it can place a byte). The AU's own flag bit gates the wire shape, and the host sets it only toward clients advertising STREAMED_AU + MULTI_SLICE, so shipped receivers keep seeing the byte-identical legacy sentinel (PUNKTFUNK_SLICE_STREAM=0 pins legacy for A/B). Both sides bound the per-frame block count by the same floored formula, and the flush loop cuts as many blocks as a chunk completes - a slice bigger than one FEC block can't leave an oversized final block behind. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 14:14:46 +02:00
enricobuehlerandClaude Fable 5	43868af1f5	feat(android): the client advertises multi-slice tolerance per-decoder ... The P0 gating branch deliberately left Android off VIDEO_CAP_MULTI_SLICE ("embedder-set decoder truth") — this is that deferred item, and the P2 slice-pipeline prerequisite. VideoDecoders.multiSliceTolerant() probes the pick for every advertised codec: tolerant unless any pick is an Amlogic decoder (the 0.17.0 device-rebooting wedge) or uninspectable (a null pick = platform default → conservatively single-slice). nativeConnect carries the bit; the JNI ORs it into the Hello's video_caps beside the panel-truth HDR bits. Phones (Qualcomm/Exynos) advertise it; the Amlogic TV boxes the gate exists for never will. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 14:14:46 +02:00
enricobuehlerandClaude Fable 5	19392918ff	feat(gamescope/hdr): HDR is attempted by default and every install path ships the patched gamescope ... Field report (RX 5700 / SteamOS): 10-bit HEVC "unsupported" — but the GPU was never the blocker (RADV probed Main10 fine on that box). The session stayed SDR because stock gamescope offers no 10-bit PQ capture formats and nothing shipped our pipewire-hdr build outside the Bazzite sysext, while PUNKTFUNK_GAMESCOPE_HDR additionally defaulted off everywhere. Close all three gaps: - PUNKTFUNK_GAMESCOPE_HDR now defaults ON (explicit-off grammar, the flip the config comment planned post-canary). Safe by construction: the +pfhdr banner probe, managed-spawn term, and client 10-bit cap keep stock-gamescope boxes on the exact 8-bit path. The nix module's gamescopeHdr (default true now) only controls whether the patched binary is on PATH; it no longer sets the env. - SteamOS: new scripts/steamdeck/build-gamescope.sh builds the HDR gamescope in the same pf2 trixie distrobox (apt dep list validated by a full build in a debian:trixie container), installs ~/.local/bin/punktfunk-gamescope, and maintains PUNKTFUNK_GAMESCOPE_BIN in host.env ONLY while the binary passes its on-glass --version/+pfhdr check — a stale absolute override would break session spawning, not just HDR. Wired into install.sh (§3b), update.sh (retrofit), and rebuild-check.sh (ldd-probes it like the host binary). - Arch: build-sysext.sh gains a --gamescope fold-in (banner-verified by execution, host-image-only), and punktfunk-host optdepends the companion. Deliberately NO CI-published host sysext: per the 2026-07-22 packaging verdict a prebuilt SteamOS host breaks on A/B soname bumps (and /var is per-partition-set), so arch.yml records that instead — SteamOS hosts use the distrobox flow above. Also fixes a latent bug that made build-sysext.sh fail every invocation as documented: a literal `}` inside `${1:?usage …{host,client}…}` terminates the expansion early and corrupts $PKG (caught by the new synthetic-package test, which also covers the fold-in, the unmarked-gamescope refusal, and the client-image guard). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 13:50:31 +02:00
enricobuehlerandClaude Opus 5	78926be4ac	fix(store): a plugin install lands in the plugins dir, not the nearest package.json above it ... Installing any plugin from the console failed on a user's Fedora 44 host with plugin store job failed: @punktfunk/plugin-virtualhere is not present after install while the same version installed fine on every box we tried. The difference turned out to be a file in his home directory. `bun add` does not install into its working directory. It walks UP to the nearest ancestor `package.json` and installs into that tree. A fresh plugins dir has no `package.json` — the store and the runner only write `bunfig.toml` — so any stray one above it captures the install: the packages land in `~/node_modules`, the dependency is written to `~/package.json`, bun prints "installed …" and exits 0, and the plugins dir stays empty. The plugins-dir `bunfig.toml` is not read in that case either, so the outcome splits on whether `@punktfunk` resolves in the hijacked tree: with no scope mapping there it 404s against npmjs and exits 1 ("the plugin runner exited with status 1"); with one, it succeeds into the wrong tree and the job dies on the presence check instead. Only the second shape looks like a broken store, which is why this took a reproduction to find. Seed the plugins dir with a `package.json` so it owns bun's install root. Three call sites rather than one: the store job, the `plugins add` CLI, and the SDK's `ensurePluginsDir`. The runner ships as its own package and can predate the host binary, so the host cannot delegate this — the same reason `ensure_bunfig_scope` writes the registry mapping on this side rather than passing a runner flag. Seeding only ever touches a tree with no `node_modules`. A dir with packages and no `package.json` is the hand-assembled/older layout that `installed_packages` deliberately falls back to the naming convention for, and dropping an empty `dependencies` on it reports every plugin the operator runs as uninstalled — already pinned by `an_emptied_dependency_list_means_nothing_is_installed`. The residual failure stops dead-ending: if the presence check fails anyway, the error names the capturing ancestor and what to do about it. Reproduced and fixed on glass (Nobara 44 VM, host + runner 0.22.3): with a stray ~/package.json the store reproduces the field report byte for byte — same 150 ms, same phase sequence, same message — and with the plugins dir seeded the same install lands correctly with nothing leaking into the home dir. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 12:48:25 +02:00
enricobuehlerandClaude Fable 5	759aac255b	feat(phase-lock): controller v3 — grid-locked submits, arrival sensing, antipode damping ... Midday on-glass falsified v2's remaining assumptions: a per-frame additive hold SATURATES the arrival-slaved loop once hold + work >= interval — submits free-run at their own cadence and the commanded phase dissolves (measured: +-2 ms hold steps, zero client response) — and the latch statistic hovers at the target's ANTIPODE, where shortest-way errors sign-flip on noise (the 0<->2<->4 ms offset chatter). v3, one change per falsified assumption: - ACTUATOR: submits lock to an absolute grid (epoch + k x period + offset); the controller walks only the offset. A periodic grid cannot free-run — occupancy is one frame per period whatever the offset — so phase actuation is linear BY CONSTRUCTION. Disengaged = no grid sleeps = zero cost; every failure path DISENGAGES (never parks: v2's e2e-tax lesson). - SENSOR: the client reports the circular mean + coherence of the ARRIVAL lead (per-AU reassembly stamps vs the panel latch grid) — the phase the host actually controls; latch measured downstream of the decoder pipeline, which absorbed the actuation. pf.phase logs "arrival lead circ= coh=". - ANTIPODE DAMPING: errors within 1 ms of +-period/2 take half-steps until they commit to a side. Harness rewritten around plants glass validated: a GRID plant (linear by construction), the DECOUPLED plant (v2's saturation — must disengage, not orbit or park), an antipode start (must converge within one period of travel), incoherence (never engages), a regime change (re-engages after backoff), and the actuator's own periodicity/offset-linearity. Also fixes the harness's SIM_TARGET (a mis-derived max asserted 3.5 ms where the controller's actual target is 2.5 — the controller was right, the ruler was wrong; the Python cross-check inherited the same constant, a lesson in replicating the CODE, not the author's belief about it). Gates: v3 simulations 6/6; host bin suite 345/1 (the documented environmental qemu UDP test); clippy --all-targets -D warnings clean; cargo ndk arm64 check clean. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 12:20:39 +02:00
enricobuehlerandClaude Fable 5	4457356ee4	test(phase-lock): a closed-loop simulation harness — both on-glass failures become CI regressions ... The controller iterated twice on the user's gaming PC before this existed; never again. punktfunk_core::phase::circular_latch is extracted from the Android presenter (shared: iOS reports next, and the harness generates its synthetic reports through the IDENTICAL statistic the clients ship), with unit tests including the wrap-straddling cluster an arithmetic mean gets maximally wrong. The stream.rs harness models the plant — latch = (base − hold + noise) mod P, deterministic LCG noise — and drives PhaseController::adjust through five regimes: - tight jitter locks into the deadband within ~5 adjusts and stops moving; - a wrap-side start takes the SHORTEST way (travel < P/2 asserted); - an incoherent phase never steps (zero hold, ever); - a v1 pinned-median report trips the travel budget and DECAYS TO ZERO — the 2026-07-31 orbit and the parked-hold e2e tax, both as asserts; - a post-decay regime tightening re-locks. Gates: host bin suite 344 passed / 1 failed = the documented environmental qemu UDP-loopback test (clean main fails identically in this container); core phase tests 4/4; clippy --all-targets -D warnings clean. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 11:18:30 +02:00
enricobuehlerandClaude Fable 5	fe552a50bb	fix(android): the phase reporter actually sends the v2 circular statistic ... The v2 client edit missed its anchor against rustfmt's reshaping and the reporter kept sending the v1 median — caught by the arm64 build the moment the tuple signature landed. Sends (circular mean, coherence) now. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 10:58:19 +02:00
enricobuehlerandClaude Fable 5	1d31e4c565	feat(phase-lock): controller v2 — circular phase, coherence gate, decay-to-zero ... Round-1 on-glass falsified two v1 assumptions in one morning (NP3 ↔ .173): - A median lead is immovable under period-spanning jitter (uniform mod P), so v1 orbited the period at 2 ms/s forever — and the dead-signal freeze hotfix never armed, because ±1.5 ms of window sampling noise kept resetting its 'error responded' check. Thresholds can't referee noise. - A HELD hold is not free: it delays sampling after the capture stamp, taxing e2e by up to a period (user-measured: ~+4 ms during the orbit). The correct failure response is DECAY TO ZERO, never freeze-in-place. v2, all three layers: - Wire: PhaseReport grows a length-discriminated coherence tail (27-byte form; the u16::MAX sentinel encodes as the byte-identical 25-byte v1 — strict-prefix discipline, both forms pinned by tests). - Client: the reporter sends the CIRCULAR vector-mean latch phase mod the panel period + its coherence (‰); pf.present logs circ=/coh=. - Host: steps only while coherent (floor 300‰; a v1 report bypasses the gate), along the signed SHORTEST way around the period, under a cumulative 1.25-period travel budget that is noise-immune by construction (it integrates applied steps, not reported errors); incoherence or budget exhaustion decays the hold to zero and re-arms once flat. Deadband convergence resets the budget — tight regimes lock exactly as designed. report_phase + the C ABI mirror gain the coherence parameter (canary-only ABI, hours old, sole caller in-tree). Gates: docker amd64 clippy --all-targets -D warnings (host+core, nvenc) clean; core suite 244/244; cargo ndk arm64 check clean. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 10:55:24 +02:00
enricobuehlerandClaude Fable 5	a5896f0883	feat(android): the phase-lock ACK is logged — the closed loop reads out in logcat ... The host's applied hold rides the 0xCF tail but nothing client-side showed it; 'adb logcat -s pf.phase' now logs transitions. This line is what exposed the dead-median controller orbit on the first on-glass run. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 10:12:56 +02:00
enricobuehlerandClaude Fable 5	74ca42568a	fix(host/phase-lock): a dead error signal freezes the hold instead of orbiting the period ... First on-glass closed-loop run (NP3 ↔ .173, canary 0.23.10498) proved the transport and both endpoints work — and exposed the controller chasing a statistic that cannot respond: under period-spanning arrival jitter the client's latch DISTRIBUTION is ~uniform mod the refresh, so shifting its mean (the hold — provably reaching the client: the paced-drop bursts locked to each wrap) cannot move its MEDIAN. The controller stepped +2 ms/s in one direction forever, wrapping the period every ~4 s, and every wrap coalesced ~30 frames at the client — a periodic hiccup that must not ship. The controller now remembers its last error: three consecutive steps that fail to move it ≥1.5 ms freeze the hold (kept, not zeroed) and log; a later report whose error moved re-arms stepping — a tight-jitter regime still locks exactly as designed. Controller v2 (a circular phase statistic with a coherence gate, per the design doc's follow-ups) replaces the median outright; this freeze stays as its safety net. Gate: docker amd64 clippy --all-targets -D warnings (host, nvenc) clean. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-31 10:12:56 +02:00
3 people	21787ca6cd	feat(decky): the plugin updates the actual client, not only the flatpak one ... The QAM already offered a client update — for the flatpak, by comparing OSTree commits. A native client (.deb, .rpm, pacman, sysext, nix, a source build), which the plugin has been able to LAUNCH since it learned to drive one, went stale in silence: no version, no check, no mention. check_update now branches on the client the launcher will actually run. The flatpak keeps its commit comparison, which is the exact one — a flatpak built from main between releases carries the release's crate version, so a version-based check would call it current when it isn't. Everything else asks the client itself, which verifies the signed manifest. update_client routes the same way: flatpak update --user, or `punktfunk-client --apply-update`. Where nothing on the box can install it, the plugin says so instead of offering a button. The QAM banner becomes the command, the About tab names the install kind so "why is there no Update button?" has a visible answer, and a check that FAILED reads as a failure — never as "up to date". Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 09:41:26 +02:00
3 people	b164b4c03e	feat(packaging): a client-only box can update its client without the host ... The root helper, its unit, the group-scoped polkit rule and the install-kind marker all shipped with the HOST package. A Steam Deck or a handheld has no host package, so the client half of one-tap updates had nothing to stand on. The client packages now ship their own copies — deliberately under their own paths (`pf-update-client`, `punktfunk-client-update.service`, `49-punktfunk-client-update.rules`, `/usr/share/punktfunk-client/install-kind`) rather than sharing the host's. Two packages owning one path is a hard conflict in dpkg, rpm and pacman alike, and the client marker needs its own DIRECTORY too because the host RPM claims `%{_datadir}/punktfunk/*` with a glob — a sibling file there would break `dnf install punktfunk punktfunk-client`. `pf-update` grows the matching `apply-client` verb. The verb comes from a root-owned unit's fixed ExecStart, never from the caller, so the zero-parameter invariant holds; both verbs sweep every installed punktfunk package, and what the verb selects is which marker is read and which binary the run-the-binary gate executes afterwards. A client sysext is refused with its reason: the signed feed carries the host image, and installing that over a client-only box is not an update. The opt-in group is created by both packages' scriptlets, idempotently, so whichever lands first wins. Also fixes the host's own helper install: it read `$R/target/release/pf-update`, which is the source checkout, while build() exports CARGO_TARGET_DIR="$srcdir/ target" and every other binary in the file installs from `$T`. Both now read `$T`. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 09:41:26 +02:00