1131 Commits

Include renames

Author	SHA1	Message	Date
enricobuehlerandClaude Opus 5	80e57c70be	fix(vdisplay): the env lock covered its writers and not its readers, and the gamescope ladder read back its own output ... Two halves of the same problem — process env used as shared mutable state. `apply_session_env` set XDG_RUNTIME_DIR / DBUS_SESSION_BUS_ADDRESS / WAYLAND_DISPLAY / HYPRLAND_INSTANCE_SIGNATURE / SWAYSOCK under ENV_LOCK, while detection read those same five keys with no lock at all, from five points spread across a `/proc` scan. That is exactly the hazard ENV_LOCK's own doc names: glibc `setenv` can realloc `environ` and free the old value string, so a concurrent `getenv` reads freed memory — UB documented there as "could crash the host". It is reachable today: the host's session watcher calls `detect_active_session` every second for a stream's lifetime while a second client's connect runs `apply_session_env` on a spawn_blocking thread. Detection now samples all five into an `EnvProbe` in ONE locked read and scans from that snapshot. Taking the lock around the whole of `detect_active_session` would have been simpler and wrong: it walks `/proc` every second, and holding a process-wide lock across a directory walk trades this problem for the one Phase 7 is about. The readers become pure functions of their inputs, which is also what let the tests stop mutating process env to steer them — `without_inherited_swaysock` is gone, replaced by handing in a probe. Empty values are now treated as absent, so `XDG_RUNTIME_DIR=""` falls back to /run/user/<uid> instead of yielding a relative path. The gamescope sub-mode ladder had a nastier version: `apply_input_env` WRITES PUNKTFUNK_GAMESCOPE_NODE/_SESSION to publish the sub-mode it chose, and read the same keys back as operator overrides. The Attach arm sets `_NODE=auto`, and `node_env` sits at rung 2 of the ladder — above `dedicated_launch` at rung 3 — so one Attach decision latched Attach for the rest of the host's life and silently overrode `game_session=dedicated`. Only rung 1 could escape it, because the Spawn arm that would have cleared the keys sits below the rung that by then always fired. The overrides are now sampled once, before this module has written anything, which keeps their actual meaning: "the operator set this before we ran". The live reads that remain (`launch_is_nested`, `poolable_now`) are deliberate — those consume the published decision. And gamescope's `create` read both keys unguarded, racing the writer and skipping the lock its two siblings take for the same keys; it now takes one guarded snapshot. Verified on Linux (.25): 100 passed, 1 ignored. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 19:45:36 +02:00
enricobuehlerandClaude Opus 5	787756e68b	test(vdisplay/mutter): the on-glass lever for the GNOME backend, and what it took to see the leak ... `live_mutter_create_drop`, `#[ignore]`d in the same convention as the Windows backend's live tests: the real four-step handshake, hold, then drop the keepalive and let the RAII teardown revert it. Verified against gnome-shell on 192.168.1.21 — node_id came back in ~5 ms, preferred_mode as asked, and the topology reverted. Two things that would otherwise be re-derived by whoever validates this next, both of which cost a wrong answer here first. The virtual monitor does NOT appear in DisplayConfig's GetCurrentState just because `create` succeeded — its size follows the PipeWire negotiation, so without a consumer attached there is no monitor to census. A before/after monitor diff therefore proves nothing about this backend, which is the trap the first attempt fell into. And a short-lived process cannot exhibit the abandoned-thread leak at all: exiting drops the D-Bus connection, which makes Mutter tear the session down no matter which code is running. Reproducing it needs the process held alive past the failed create, and the observable is the live RemoteDesktop session object, not the monitor: `gdbus introspect -d org.gnome.Mutter.RemoteDesktop -o /org/gnome/Mutter/RemoteDesktop` lists a `node Session` child per live session. With a 1 ms create timeout forced and the process held 20 s, that probe reads 0 with b89a36a6 and 1 without it — the orphan thread parked on a live session. Both read 0 after exit, which is precisely why this only ever bit a long-running host. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 19:45:11 +02:00
enricobuehlerandClaude Opus 5	69bc92afed	fix(vdisplay/mutter): a create timeout no longer abandons the session thread with the desktop dark ... `create` gave up after 45 s and dropped its `stop` flag WITHOUT setting it — the `StopGuard` that owns the only `store(true)` was built on the success path only. The thread meanwhile discarded its own send failure with `let _ =`, so it sailed past the dead channel, made the virtual output PRIMARY, and parked in `while !stop` for the rest of the process's life holding the D-Bus connection that IS the monitor's lifetime. Its teardown was unreachable. Under the default topology that orphan applies a SOLE-monitor APPLY_TEMPORARY config. Every physical head goes dark, and Mutter reverts such a config only once the virtual monitor disappears — which the parked thread prevents. There is no in-process recovery: each retry adds another orphan and another virtual monitor. The other three portal/D-Bus backends never had this — kwin.rs, hyprland.rs and wlroots.rs all `?` on that exact send. Mutter is now the same shape, via a shared `report_node` that stops the session when the opener has gone. Two more layers behind it, because the send can also LAND in the moment `recv_timeout` gives up: `create` and `stream_existing_output` build their guards BEFORE the wait, so every error arm signals the thread on its way out, and the thread re-checks the flag before it touches topology — so a doomed session never applies a sole-monitor config at all, rather than applying one and reverting it a tick later. The fix lands once because the duplication that caused it is gone first: `connect` and `connect_monitor` shared ~72 verbatim lines, and the mirror path repeating the session path's `let _ = send` is precisely what that copy bought. Both now share `open_rd_sc` (steps 1-2) and `start_and_await_node` (step 4). Also stops a physical hotplug stealing the virtual monitor's identity. `wait_virtual_connector` took "any connector absent from the pre-snapshot" across a window spanning a ~10 s stream wait plus 6 s of polling; TOPOLOGY_LOCK keeps sibling sessions out of it but a hotplug is not ours to serialise, and the session's topology apply and scale persistence would then be aimed at the operator's new panel. It now prefers the connector advertising the client's exact WxH — the discriminator `make_virtual_primary` already matches on — falls back to the old behaviour when that singles nothing out, and warns when more than one candidate appears. Tests: `pick_virtual` split out of the polling loop so the choice is testable without a session bus. Verified on Linux (192.168.1.25): 99 passed, and the hotplug case FAILS against the old first-new-connector logic, so it is not vacuous. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 19:45:11 +02:00
enricobuehlerandClaude Opus 5	e7dc7e9d18	fix(win-display): every CCD/GDI operation now carries a proof, not just the blocks that needed one ... Companion to c16f2850, which closed the same hole in pf-vdisplay. The file header claims "Every `unsafe` block in this file carries a `// SAFETY:` proof", and that was true — it just did not cover the 84 unsafe OPERATIONS sitting directly in `unsafe fn` bodies, which under edition 2021 need no block and so carry no proof. That is the whole CCD surface: every QueryDisplayConfig, every SetDisplayConfig, every DISPLAYCONFIG union read. Rather than 84 restatements of the same argument, the shared contract is stated ONCE at the top — how the buffer-size/query pair keeps pointer and count in agreement, and why the two obligations the compiler cannot see (arrays only ever come from the OS or from a SavedConfig this module built; SetDisplayConfig serialised under the manager `state` lock and bound to the input desktop) hold at every site. Per-site comments then name the site-specific fact instead of repeating the invariant. The union reads justify differently and the header says so: `modeInfoIdx` and `ADVANCED_COLOR_INFO.value` overlay same-sized POD, so no discriminant can be got wrong, while `MODE_INFO.Anonymous.sourceMode` IS discriminated by `infoType` — and every read of it is guarded by that check. Writing that down found the one place the guard does NOT gate the read: the `then_some` in set_virtual_primary_ccd evaluates eagerly, so POD-ness is what carries it there, not the check. The comment says so rather than implying a guard that is not doing the work. Two shape changes, both deliberate. `wait_mode_settled`'s two calls are nested rather than `&&`-joined so the second CCD query stays short-circuited — it polls every 25 ms and must not run while the target has no active path. And the eager union read in `set_virtual_primary_ccd` is hoisted to a `let` so its proof has somewhere to attach; `then_some` already evaluated it eagerly, so nothing changes. Union field ASSIGNMENTS are safe in Rust — only reads are — so two of them keep no block. Verified on the Windows CI runner: clippy -D warnings clean across pf-frame, pf-win-display, pf-capture and pf-vdisplay, and both crates' tests pass. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 19:45:11 +02:00
enricobuehlerandClaude Opus 5	6782aa0054	fix(vdisplay): stop the suite reporting ok for tests that never ran, and let clippy see the KWin backends ... Three coverage holes, all of the same shape — a gate that looks green because nothing is behind it. The Windows half (~3,400 lines) had no executed tests. Its only two `#[test]`s opened with `if env::var("PUNKTFUNK_PF_VDISPLAY_LIVE").is_err() { return; }`, so without the hardware they passed without running, and no CI job compiled the crate's test targets at all — `-p punktfunk-host` builds pf-vdisplay as a dependency, which never reaches a `#[cfg(test)]` module. Both live tests are `#[ignore]`d now (an unrun hardware test should say `ignored`), and windows-host.yml gains the `--all-targets` lint plus a real test step. The link question that keeps the host and pf-encode on clippy-only does not apply: pf-encode is `default = []` and nothing here turns on nvenc/amf-qsv/qsv. Settled on the runner to the same standard as pf-capture's step — 46 passed, 2 ignored. `#![allow(clippy::all, ...)]` at the top of kwin.rs and kwin_output_mgmt.rs was meant for wayland-scanner output, but the generated modules already carry their own copy of that attribute — so the file-level one was only ever silencing 2,366 lines of hand-written backend, with `clippy::correctness` (deny-by-default) among the casualties. Dropping it found a dead match arm in the `kde_output_configuration_v2` dispatch; that one is now exhaustive on purpose, so a re-vendored XML that adds an event fails the build instead of dropping it silently. (The sibling `_ => {}` in the DeviceMode dispatch is NOT dead — `ModeEvent::Removed` really does reach it and get swallowed, which is a separate defect.) `dead_code` is now enforced on Linux, where ~10k of the ~17k lines live, instead of allowed crate-wide behind a rationale that had stopped being true. It turned up no genuinely dead code: four items, every one live from tests or another platform, now annotated with which. One deserved the comment most — `Entry::keepalive` is "never read" because it is an RAII guard whose `Drop` releases the compositor output, so deleting it as unused would release every pooled display the moment it was created. Two tests were not testing what they claimed. `another_uids_socket_is_ignored` asserted the sway-socket ownership guard but never reached it — `find_sway_socket` filters on the `sway-ipc.<uid>.` filename prefix first, so the foreign-uid file was rejected by name and the assertion held even with `md.uid() != uid` deleted. It is renamed to what it does cover, and the real leg is a new `#[ignore]`d root test that chowns a correctly-named socket (querying with a non-matching pid, or the exact-path shortcut would return before the guard and make it vacuous all over again). And proc.rs's tests were ungated while the module is compiled everywhere, so they would have gone red on Windows the first time anyone ran them: `#[cfg(all(test, unix))]` now, with a `cmd /c` twin that does run there. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 19:45:11 +02:00
enricobuehlerandClaude Opus 5	995cac5d03	fix(vdisplay): the three hardest FFI calls were exempt from the crate's own unsafe-proof rule ... `#![deny(clippy::undocumented_unsafe_blocks)]` cannot see an unsafe operation that sits directly in an `unsafe fn` body — in edition 2021 `unsafe_op_in_unsafe_fn` is allow-by-default, so a bare call inside such a body needs no block and therefore carries no proof. The file headers claim "every unsafe block carries a SAFETY proof", and that was true; it just did not cover the calls that needed it most. Turning the lint on named exactly three: `DeviceIoControl` and the `ioctl` wrapper in pf_vdisplay.rs — the whole host<->driver control channel — and `restore_displays_ccd` in manager.rs, the call the teardown path depends on to give the operator their physical panels back. Each now carries a real proof, and `ioctl` and `set_render_adapter` grew the `# Safety` heading their callers were owed. Also teaches scripts/wincheck.sh to cover pf-vdisplay, which is what let the above be compile-verified rather than reasoned: the crate's Windows half is ~3,400 lines that Linux CI never compiles. That needed a stub pf-encode (the real one drags ffmpeg-sys, and the admission gate calls exactly one predicate from it) and CompositorPref on the stub core. Verified non-vacuous with a planted type error. pf-win-display's half of the same lint is a separate change — it flags 62 further operations, and they want proofs written one at a time, not in bulk. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 19:45:11 +02:00
enricobuehlerandClaude Opus 5	9b38b6a22d	feat(stats): a capture records which encoder and GPU produced it ... The stage split is the thing an fps-shortfall report is diagnosed from, and it cannot be read without knowing the backend behind it: a p50 `submit` of 10 ms means "the GPU's CSC+encode throughput is the ceiling" on one backend and something else entirely on another. The capture's meta carried the mode, codec and client but neither the encoder nor the GPU, so every report so far cost a round-trip asking which one it was. Both come from `pf_gpu::active()` — the record the encoder open itself writes — so they name the branch that really opened rather than a re-derived guess that goes stale the moment a backend gains an internal fallback. Read once per capture, not per frame. The console shows them next to the mode in the recording's header. Both fields are `serde(default)`, so a recording made before this still loads and simply omits them. Refs #9 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 19:14:10 +02:00
enricobuehlerandClaude Opus 5	eb4ab91627	feat(host): a frame limiter for the game, not for the stream ... PUNKTFUNK_MAX_FPS caps how fast the compositor lets the game render. It deliberately does NOT touch the session: the client still negotiates and receives its full rate, because the encode loop re-encodes the held frame whenever the compositor produced no new one, and a repeat of an unchanged picture is an almost-empty P-frame. So a 60-capped game on a 120 Hz session still puts 120 frames a second on the wire — and the GPU time the game gives up goes to capture and encode instead, which is the point (on a laptop or a handheld, it goes to heat and battery too). Capping the stream would be a different and mostly unwanted feature: it hands the client fewer frames than it asked for and saves the game's GPU nothing. gamescope is the compositor that has the lever, so it is the one that gets it: the rate becomes --nested-refresh, which is what gamescope clamps the game to. All three sessions we own take it — the bare spawn's -r, the managed gamescope-session-plus wrapper's PF_HZ, and the SteamOS PATH shim's. In the managed path the limit lands on PF_HZ alone and NOT on CUSTOM_REFRESH_RATES, so the mode the session advertises stays the client's — that is what makes games see the real refresh rather than the box's EDID. Two scoping notes. Under gamescope the cap is the nested output's rate, so everything it composites moves at it, not the game alone; there is only the one output. And the attach path (PUNKTFUNK_GAMESCOPE_NODE) mirrors a gamescope we do not own, so it has no lever to pull and is untouched. Closes #13 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 19:14:10 +02:00
enricobuehlerandClaude Opus 5	86b605f01f	feat(host): run the virtual display faster than the stream needs ... PUNKTFUNK_VDISPLAY_HZ_MULT runs the virtual display at a multiple of the session's rate without putting one extra frame on the wire. A compositor paints on its own vblank, so a frame finished just after the capture sampled waits nearly a full interval to be picked up — the jittery part of the latency budget, not the steady part; at 2 that worst case halves. It costs the compositor and GPU the extra composites, so it stays opt-in at 1. The pacing rate was previously just "whatever the backend achieved". It is now the session's rate floored by the achieved one — the same value as before whenever the knob is unset, and the only correct answer when it is set: never above what the client negotiated, never above what the display actually produces. Both build sites get it, the initial build and the in-place resize, so a mid-stream resize can't silently drop back to 1x. A backend that won't give the multiplied rate now says so at info rather than warn, since that is the expected outcome of an opt-in knob; falling short of the SESSION's own rate still warns, because that one costs the client frames. Closes #14 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 19:13:19 +02:00
enricobuehlerandClaude Opus 5	f98547c41f	fix(web-console): the paired-clients card counts both pairing planes ... GameStream and native (punktfunk/1) clients pair into separate stores, and `/status` only ever reported the GameStream certificate count. Native is the DEFAULT plane, so a host whose clients had all paired normally — and which Moonlight had never touched — showed "0 paired" on the dashboard. Report the native count alongside it, the way the tray's own summary route already does, and sum the two in the card. Closes #10 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 19:13:19 +02:00
enricobuehlerandClaude Opus 5	0c4e582b29	fix(gamescope): a managed session now proves our flags reached it ... The bare spawn builds gamescope's argv itself. The two managed modes hand the flags over indirectly — `gamescope-session-plus` through `GAMESCOPE_BIN` + `PF_HDR_ARGS`, SteamOS through a PATH shim — and a session free to ignore either would exec the distro's gamescope carrying none of them. Half of that failure was already loud: HDR dies on the bit depth the Welcome fixed before the display existed. The other half was silent. The host had been told the compositor would paint the pointer, so it stopped painting one, and nobody did — a stream that is correct in every respect except that it has no cursor, which nothing in the logs would have said. So both managed paths now read the running compositor's `/proc/<pid>/cmdline` once its node appears, and refuse the session when a flag we passed is missing. The plan is fixed by then (`cursor_blend` feeds the encoder open, which precedes the display), so this session cannot be corrected in place; instead the capability is latched off for the process and the spawn fails, and the retry resolves a correct SDR host-composited session. One rejected attempt per boot, then it converges. Fails OPEN at every ambiguity: no flags expected, or no readable gamescope in `/proc`, says nothing. And it accepts ANY running gamescope carrying the flags, because a box commonly has a second one — the Nobara test box runs its own game-mode `/usr/bin/gamescope --steam` beside ours. That leaves only false PASSES possible, and the flag that matters cannot produce one: `--pipewire-composite-cursor` exists nowhere but our patch set. Two things fell out of writing it. `gamescope_argvs` matches argv[0]'s basename with `ends_with`, not `==` — the old equality test would have missed our own `punktfunk-gamescope`, which is what `current_gamescope_output_size` was already scanning for. And `hdr-probe` gained a line for who paints the cursor, the one capability with no symptom of its own until you compare two streams. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 18:03:30 +02:00
enricobuehlerandClaude Opus 5	ee716d0137	fix(encode): pf-encode did not build on Linux without vulkan-encode ... `vulkan_encode_available_at` and `vulkan_encode_caps` were gated on bare `target_os = "linux"`, but the second returns `vulkan_video::VulkanEncodeCaps` and both reference that module — which only exists under the feature. Every CALL SITE was already correctly gated, so nothing pointed at them; the two definitions alone were enough to fail the build. That is CI's default-feature line (`cargo clippy --workspace --all-targets`), so this was going to be caught — it was caught on a Fedora 44 box first. `cursor_blend_capable`'s `ten_bit` goes unused in the featureless arm for the same reason, which `-D warnings` also rejects. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 18:03:30 +02:00
enricobuehler	3d3ecf1e82	test(encode/nvenc): the NVIDIA HDR leg, verified on an RTX 5070 Ti ... The NVIDIA half of "zero-copy, no host CSC, 10-bit HDR" had never met a GPU. Two `#[ignore]`d smokes now drive it, run on `.41` (Bazzite f43, RTX 5070 Ti, driver 595.58.03): * `nvenc_cuda_hdr10_packed_rgb` — a packed 2:10:10:10 CUDA payload straight into NVENC as `ARGB10`, HEVC **and** AV1. Asserts what would catch a mislabelled stream: the encoder DERIVED 10-bit and HDR from the input format rather than being told, and picked `ARGB10` for `X2Rgb10`. That derivation is what selects Main10 / AV1-at-10 and the BT.2020 PQ signalling. * `nvenc_cuda_hdr10_cursor_blend` — `cursor_blend.comp` MODE 3/4, the 10-bit channel-unpacking twin. Asserts the blend targets `SlotFormat::X2Rgb10` and not the 8-bit layout, which would tint the pointer and shift its channels. Both green, and the dumped bitstreams decode 0-error reporting `Main 10` / AV1 `Main`, `yuv420p10le`, `bt2020nc` / `smpte2084` / `bt2020`. There is no host colour conversion anywhere on this path: the frame arrives as a LINEAR dmabuf, crosses to CUDA through the Vulkan bridge, and NVENC's ASIC does the BT.2020 conversion following the VUI the session configured. The "no CSC" property AMD gets from the EFC, NVIDIA gets from the encoder itself. The whole pre-existing `nvenc_` suite was re-run alongside them — 16/16, no regression from the depth-derivation and buffer-format changes underneath it. Capture half checked too: the patched gamescope binary built on the AMD box runs unmodified on the NVIDIA one (same Fedora 43 base) and its node offers the same four formats with the colorimetry props — so headless gamescope + 10-bit PQ is not AMD-specific.	2026-07-28 18:03:30 +02:00
enricobuehler	576bf7e294	test(encode/vulkan): 10-bit smokes — and they pass on a real AMD GPU ... The Vulkan Video 10-bit path was the least-exercised code on this branch: nothing had ever created a Main10 video session, so the profile query, the `G10X6…3PACK16` picture allocation, the scratch→plane copy, the hand-packed AV1 sequence header and the colour signalling were all first-run-on-glass. Three `#[ignore]`d smokes now drive them, and they were run. `.116` (Bazzite f43, AMD 780M, RADV / Mesa 26.0.4), all three green: * `vulkan_smoke_10bit` — HEVC Main10 through the compute CSC; * `vulkan_smoke_10bit_av1` — AV1 at 10 bits; * `vulkan_smoke_rgb_10bit` — HDR with NO host CSC, the EFC converting BT.2020 off the packed 10-bit source. It did **not** soft-skip, which answers the one capability in this whole feature I had only ever read in a registry: RADV's VCN EFC really does advertise `MODEL_YCBCR_2020` and accept a 10-bit packed-RGB encode source. Every stream decodes 0-error and reports `yuv420p10le` + `bt2020nc` / `smpte2084` / `bt2020`. The AV1 one parsing at all is the load-bearing result there: `high_bitdepth` precedes the CICP bytes in `color_config()`, so a wrong bit would have thrown every later field out of phase rather than merely mislabelling the depth. Round-trip on solid frames, fed (160,160,800) as 10-bit codes: compute CSC -> (159, 158, 796) EFC -> (159, 158, 796) AV1 -> (158, 159, 794) Under 0.5%, all of it limited-range quantisation and lossy encode. The compute and EFC results being IDENTICAL is the strongest check available: two independent BT.2020 NCL implementations — my shader and AMD's fixed-function block — agreeing to within rounding. The smokes deliberately assert structure (submits encode, AU count, the depth the encoder settled on), not colour: a shader writing the 10 bits into the wrong end of the word still produces a decodable stream. Colour is the dump + ffmpeg round-trip above, which is what actually caught nothing this time. Also corrects a comment: I claimed a wrong store factor was a "~1.6% luminance error". It is not. The `<< 6` PLACEMENT is the load-bearing part (dropping it is 64x too dark); `1/1023` vs `64/65535` is ~0.1% and harmless.	2026-07-28 18:03:30 +02:00
enricobuehler	fd648aa776	feat(gamescope): put the cursor in the node, so a session can be zero-copy ... gamescope keeps the pointer out of its PipeWire node — it lives on a hardware plane for scanout, and `paint_pipewire()` composites a separate, reduced frame that never includes it. So punktfunk has always reconstructed it from XFixes and blended it in host-side. That blend is what has been blocking the zero-CSC encode path, and the cost is larger than it sounds: `VulkanVideoEncoder::open` refuses the RGB-direct (EFC) source for any session with `cursor_blend`, because that front end is fixed-function and has no blend stage. `cursor_blend_for` sets it unconditionally for gamescope. Net effect: a gamescope session paid a full-frame colour-conversion pass per frame, forever, for a pointer. So put the cursor where it belongs. A second carried gamescope patch adds `--pipewire-composite-cursor` (off by default — the node has never carried it, and a consumer that draws its own would get two), painting it with the same `MouseCursor::paint` call the scanout composite uses. It scales for free: paint_pipewire has already set `currentOutputWidth/Height` to the capture size, which is what that function scales against. The repaint test grows the cursor's state beside the commit ids — a pointer-only move produces no commit, so without it the composited cursor would freeze on a static screen while the real one moved, and a cursor that became hidden would never be erased. Host side, the `+pfhdr` marker becomes a monotonic PATCH LEVEL, so one probe answers every capability the session must know before it is planned (level 1 = HDR formats, level 2 = the cursor flag). `cursor_blend_for` and the `gamescope_cursor` resolver both consult it through one helper, because they have to agree: the reader without the blend is a wasted X11 connection, the blend without the reader is a stream with no pointer, and both together with a gamescope that paints its own would draw two. ⚠ The two indirect spawn modes carry the flag through `PF_HDR_ARGS`, so this shares a dependency with the HDR flags: a session that ignores `GAMESCOPE_BIN`/`PATH` and execs the distro's gamescope gets neither. HDR fails loudly there (negotiation timeout + SDR latch); a missing cursor would be silent. Noted in packaging/gamescope/README.md as worth a post-spawn `/proc/<pid>/cmdline` check if it ever bites.	2026-07-28 18:03:30 +02:00
enricobuehler	2a13bc5252	fix(gamestream): advertise AV1 Main10, and honour HDR per negotiated codec ... `ServerCodecModeSupport` layered `SCM_HEVC_MAIN10` and never `SCM_AV1_MAIN10`, on the stated theory that "the GameStream AV1 path is left off until live-confirmed". But the SDR baseline has always offered AV1 **Main8** to every client, so that path is either live or it is not — the DEPTH was never the uncertain part, and the omission only cost AV1-preferring clients their HDR. Now that the encoders probe 10-bit per codec, each bit is gated on that codec's own `can_encode_10bit` AND the SDR baseline already advertising it. A box that does HEVC Main10 but not 10-bit AV1 — or the reverse — advertises the truth instead of one bit standing in for both. Two gates follow from that: * `host_hdr_capable` becomes codec-agnostic (ANY 10-bit-capable codec makes the host HDR-capable). It was asking about HEVC alone, which would have hidden HDR entirely on a hypothetical AV1-only-10-bit box; * the RTSP honor gains the per-session half: a client that negotiated the codec this host CANNOT do 10-bit with degrades to 8-bit SDR there, rather than being handed a PQ label over an 8-bit stream. H.264 always lands there — there is no 10-bit H.264 encode anywhere. The unit test now pins each bit independently, including the two one-without- the-other cases a single shared flag got wrong in both directions.	2026-07-28 18:03:30 +02:00
enricobuehler	cb4690f216	feat(encode/vulkan): probe the device instead of guessing — AV1 10-bit + zero-CSC HDR ... Three fixes to the same mistake: deciding what the Vulkan Video backend can do from a table in our heads rather than from the driver, and routing everything that didn't fit to libav VAAPI — where a session loses real RFI recovery and the cursor blend for no reason the hardware asked for. **Capability probe, per codec AND depth.** `probe_encode_support`'s "is there an encode queue" boolean becomes `VulkanEncodeCaps { supported, eight_bit, ten_bit }`, answered by `vkGetPhysicalDeviceVideoCapabilitiesKHR` against the very profile chain the session open builds. So the dispatcher's prediction cannot disagree with reality: a capable device keeps the Vulkan path, an incapable one routes to VAAPI BEFORE burning a failed open, and the cursor-blend mirror stays honest for free. This is the shape the direct-SDK NVENC path already uses for its codec GUIDs. **AV1 10-bit.** It was excluded on a guess about driver coverage; now the device answers. `color_config()` carries `high_bitdepth` + the BT.2020/PQ CICP triplet in both the `StdVideoAV1ColorConfig` and the sequence-header OBU we bit-pack ourselves — they must stay identical or the driver's frame OBUs parse against a header we didn't write. `high_bitdepth` sits BEFORE the CICP bytes, so getting it wrong doesn't just mislabel the depth, it puts every following field one bit out of phase; the new test reads the packed bits back. **Zero-CSC RGB-direct in HDR.** The EFC probe assumed BT.709 and BGRA. It now asks for the model this session's colourimetry needs (`MODEL_YCBCR_2020` for 10-bit — the extension has always had it) and for the CAPTURED format as an encode-source format, and the session create-info selects the matching model. An HDR session with no pointer to composite therefore hands the captured buffer straight to the fixed-function front end and runs no host CSC at all. Sessions that DO composite a pointer keep the compute CSC, unchanged: the EFC cannot blend, and that rule outranks everything. Also: `can_encode_10bit` on AMD/Intel now reports the union of VAAPI's and Vulkan Video's answers instead of VAAPI's alone. `open_amd_intel` tries Vulkan first and falls back, so either one being able to encode Main10 makes the session 10-bit-capable — answering `false` because only one of them said yes stranded encodable HDR sessions at 8 bits.	2026-07-28 18:03:30 +02:00
enricobuehler	479f0965ee	feat(encode/vulkan): Vulkan Video encodes 10-bit, so AMD/Intel HDR keeps the good path ... The Vulkan Video backend was 8-bit for no structural reason — the API has `VK_VIDEO_COMPONENT_BIT_DEPTH_10_BIT` and `PROFILE_IDC_MAIN_10` in the very fields this pinned to 8 and MAIN, and AMD VCN and Intel both encode Main10. It was six hardcoded sites, and the cost of leaving them was paid twice over: an HDR session had to take libav VAAPI, losing real RFI loss recovery AND the compute CSC's cursor blend — which on gamescope is the only way the pointer reaches the stream at all, since gamescope has no embedded-cursor mode. An HDR session now opens a Main10 profile with 10-bit component depths, a `G10X6_B10X6R10X6_2PLANE_420_UNORM_3PACK16` picture + DPB, and an SPS carrying `bit_depth_*_minus8 = 2` with the BT.2020/PQ CICP triplet instead of BT.709. `rgb2yuv10.comp` is the CSC's twin, and the two interesting parts of it are: * it is a PURE 3x3 matrix. The samples arrive already PQ-encoded (gamescope composites into the PQ container), so BT.2020 NCL applies to the code values as they are — there is no transfer function to apply here and applying one would be wrong; * the scratch planes are `R16`/`RG16`, not the picture's plane formats. The 10-bit ycbcr plane formats are not storage-image formats, so the shader writes the value into the HIGH bits by hand (`code10 << 6`, hence the `64/65535` factor and not `1/1023`) into planes that are merely SIZE-compatible with the picture's — which is all `vkCmdCopyImage` requires. Scope and safety: * HEVC only. AV1 10-bit encode has far thinner driver coverage, and a session open is not the place to gamble on it — those stay on VAAPI, as does a device that fails the Main10 profile query inside the open (the pre-existing "failed Vulkan open falls back to VAAPI" net, no new probe needed). * HDR pins the compute-CSC arm over the EFC RGB-direct one, which the EFC could not serve anyway: its fixed-function conversion is 8-bit BT.709 narrow with no knob for BT.2020. * `open_inner` binds `hdr` to the parameter-set HEADER bytes, so the depth flag is `ten_bit` there — the one name collision this change had to route around.	2026-07-28 18:03:30 +02:00
enricobuehler	17f824c3e9	feat(encode/nvenc): an HDR capture stays zero-copy on NVIDIA ... AMD/Intel needed no new encoder code for HDR — the VAAPI path already ingests an XR30 dmabuf into `format=p010:out_color_matrix=bt2020`. NVIDIA did: the 10-bit formats were excluded from the GPU import outright, so an HDR session fell back to a CPU readback plus swscale, which is the one thing the capture path is not allowed to ship. It turns out no CSC kernel is needed. NVENC ingests packed 10-bit RGB natively as `ARGB10`/`ABGR10` and does the conversion itself following the configured VUI matrix — which `apply_low_latency_config` already sets to BT.2020 NCL for an HDR session. So the frame travels LINEAR dmabuf → Vulkan bridge → CUDA → NVENC unconverted: no host CSC pass, no depth loss, no extra work on a contended SM. * invariant 1 is restated rather than dropped: HDR must never take the TILED EGL de-tile blit (it renders into an 8-bit `GL_RGBA8` texture). The HDR pods are LINEAR-only by construction, so the plan may build the importer; the per-frame gate — which sees the negotiated modifier the plan cannot — is what enforces the tiled half, and falls back to the CPU path if a producer ever ignores our offer. * …but only where the encoder can actually take the payload (`linux_hdr_cuda_ok`). libav's HDR route builds a P010 hardware frames context and swscales into it, so on a host without the direct-SDK backend a packed-2:10:10:10 CUDA buffer would land in a P010 surface as garbage. Those keep the CPU path. * `nvenc_cuda` stops pinning 8-bit/SDR. Depth and HDR now follow the INPUT format, like the Windows backend: a 10-bit session whose capture came back 8-bit encodes AND labels 8-bit rather than mislabelling. * the cursor-blend compute shader gains two 10-bit modes, so the pointer gamescope leaves out of its node survives the HDR path. Same display-referred blend the CPU path's `composite_cursor_rgb10` already does — the samples are PQ, and a real sRGB→PQ cursor LUT is polish, not correctness for a pointer.	2026-07-28 18:03:30 +02:00
enricobuehler	689297c86e	feat(hdr): a gamescope session streams true HDR10, decided before the Welcome ... The Linux native plane has been 8-bit for a reason that stopped being true: `capturer_supports_hdr()` returned a flat `false` because Mutter's virtual monitors are SDR-only upstream. That is still right for Mutter, KWin and wlroots — and wrong for gamescope, whose node can now offer 10-bit BT.2020 PQ (packaging/gamescope). Open the three gates that held it off, together: * the capture-side gate becomes SOURCE-AWARE (`capturer_supports_hdr_for`): Windows keeps its platform answer, gamescope asks whether the resolved binary offers the formats, everything else stays false. It must be truthful rather than optimistic — the Welcome is irrevocable, and PQ frames on an 8-bit encoder are a deliberate hard error — so every term is a static fact resolved before anything is spawned, including "do we spawn gamescope at all" (an attach inherits someone else's flags and can promise nothing); * `want_hdr` reaches the capturer: `open_virtual_output` grew the parameter it never had, and the host arm stopped dropping `want.hdr` on the floor; * the spawn gains `--hdr-enabled --hdr-debug-force-support` on all three sub-modes (bare args, the `GAMESCOPE_BIN` wrapper, the SteamOS PATH shim), from one shared `hdr_args` — the force flag is what makes it work headless, and forgetting it looks exactly like a negotiation failure. Two things that would have gone wrong quietly: * the keep-alive reuse key gains `hdr`. gamescope cannot turn HDR on live, so a kept SDR display handed to an HDR session would give the game no HDR surfaces while the stream negotiated PQ over an SDR composite — wrong, and not obviously broken. Same for the managed session-plus/SteamOS reuse check. * the HDR-negotiation-failure latch becomes PER SOURCE. It was one process-wide flag, so a monitor that left HDR mode would have disabled gamescope HDR until the host restarted, and vice versa — two facts with nothing in common but the word HDR. GameStream follows the same shape: `host_hdr_capable` gains the gamescope arm, and the RTSP gate's live BT.2100 monitor probe is scoped to the portal source — a headless box has no monitor to be in HDR mode, so running it there would hard-refuse every gamescope HDR session. Off by default for one release (`PUNKTFUNK_GAMESCOPE_HDR=1`), and `punktfunk-host hdr-probe` now answers for both Linux HDR sources.	2026-07-28 18:02:13 +02:00
enricobuehler	28c50d1c5b	fix(encode): every backend signals its colour, so no decoder has to guess ... Three encode paths shipped a bitstream with no colour description at all, leaving primaries/transfer/matrix/range "unspecified": - Vulkan Video HEVC (`vk_build.rs`) built an SPS with no VUI whatsoever. This is the DEFAULT backend for AMD/Intel Linux hosts on HEVC/AV1. - Vulkan Video AV1 packed `color_description_present_flag = 0`. - The openh264 software path wrote nothing (it converts BT.709 limited and relied on decoders defaulting to that). - The libav-NVENC Linux path excluded packed-RGB 4:2:0, on the belief that "NVENC's internal CSC writes its own VUI". It doesn't: libavcodec derives `colourDescriptionPresentFlag` from the AVCodecContext colour fields, so leaving them unspecified emits none. Reachable on a CPU/dmabuf capture, a build without `--features nvenc`, or PUNKTFUNK_NVENC_DIRECT=0. Unsignalled looks fine on every punktfunk client — `csc_rows` falls back to BT.709 on "unspecified" — which is why this survived. Vendor TV decoders do not: they guess colorimetry from RESOLUTION, and an LG webOS panel reads a 4K SDR stream as BT.2020 and renders it visibly washed out. All four now signal BT.709 limited, which is what every host CSC actually produces (`rgb2yuv.comp`, `convert_bt709`, the swscale paths) and what the Welcome's `ColorInfo::SDR_BT709` already advertises out-of-band. NVENC, VAAPI, QSV, AMF and the Windows libav path were already correct. Two tests, both parsing the REAL emitted bitstream rather than re-asserting the constants: an independent bit-walk of the AV1 sequence header (the packed OBU must stay identical to the `StdVideoAV1ColorConfig` handed to the driver), and an H.264 SPS/VUI parse proving openh264 honours the request instead of dropping it. Not yet verified on hardware: the HEVC VUI depends on the driver's SPS writer emitting `vui_parameters()`. PUNKTFUNK_VULKAN_ENCODE=0 falls back to VAAPI if a driver mishandles it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> (cherry picked from commit 3c56ff5717b2c9a0871953127da3dadd6a84220d)	2026-07-28 17:01:59 +02:00
enricobuehler	0868b6a364	fix(vdisplay): compositor availability follows the live session, not the env ... GNOME/Mutter reported "Unavailable" on a host sitting in a live Mutter session — and, on the same request, "Default", because the two columns had different sources. available() asked each backend, and those probes read the process env (XDG_CURRENT_DESKTOP for Mutter, WAYLAND_DISPLAY for KWin's registry handshake, SWAYSOCK for sway) — env a host started outside the session (systemd --user, a TTY, ssh) never inherited. It is only retargeted at the live session on the connect path, so the answer also flipped depending on whether anyone had connected yet. Both columns now come from the same /proc scan detect() already used: the live session's compositor is usable by definition, as is an explicit operator pin, and the per-backend probe stays as the fallback for backends that are not the live session (gamescope, which spawns its own). A live KWin without the zkde_screencast grant now surfaces as available and fails at create with that probe's precise message, which beats "no usable compositor" on a box visibly running KDE. Mutter's env sniff stays deliberately narrow — one var, not three. XDG_CURRENT_DESKTOP is the one apply_session_env owns end to end (written per connect, scrubbed when nothing is live); sniffing DESKTOP_SESSION alongside would resurrect the bug that scrub exists to prevent, where a stale value after a gnome-shell crash routes the next client into a dead session. Non-Linux hosts now report no compositors at all rather than five Linux backends flagged unavailable with no default — on Windows the pf-vdisplay driver is the only backend and vdisplay::open ignores the argument, so the old list read as broken detection instead of "not applicable here". The console says so explicitly. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> (cherry picked from commit eb7ba3d6177552f5c3ed6a15439404084869c636)	2026-07-28 17:01:59 +02:00
enricobuehler	5ea087ca47	feat(session): the stats overlay scales with the display's DPI ... The stream chrome — stats OSD, capture hint, start banner, resize label — was hardcoded at 14 px with 12/10/8 px insets. The overlay composites into the swapchain 1:1 in PHYSICAL pixels, so on a 4K panel at 200 % all of it rendered at half its intended physical size: fine on a 1080p monitor, a squint on a HiDPI laptop. FrameCtx now carries a scale — SDL's window display scale (DPI × the display's content scale) times a PUNKTFUNK_OSD_SCALE preference — and every metric moved into a `base` module that is multiplied by it. Re-read per frame and quantized into the damage key, so dragging the window to a differently-scaled monitor re-renders at the new size rather than keeping the stale one. Sanitized because SDL returns 0.0 when it cannot resolve the window's display, which would collapse the panel to nothing. Two details worth keeping: the face is re-derived at the scaled size rather than the canvas transformed, because Skia rasterizes glyphs at the requested size where a magnified 14 px bitmap would be mush; and the long capture hint is fit-clamped to the window — at 2× it is wider than a 1080p screen, so scaling it naively would have traded a small OSD for a truncated one. Linux and Windows share this path. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> (cherry picked from commit 744467d13a28b91ba88a23d6038da70263e9b502)	2026-07-28 17:01:59 +02:00
enricobuehler	b444308592	feat(host): PUNKTFUNK_HOST_NAME names the host in Moonlight and the clients ... A box called `bazzite-htpc` had no way to present itself as "Living Room" short of renaming the machine. The new knob overrides the name everywhere a human sees it: the GameStream serverinfo <hostname> element and the mDNS service instance name both adverts carry. Unset (the default) is the machine's own hostname, exactly as before. Free text is the point, so the DNS-level name is now a separate concern from the display name. The instance label may contain spaces and accents; an A-record target may not, and mdns-sd rejects the whole ServiceInfo if the target is not a legal name — which would take discovery down rather than merely look wrong. dns_label() sanitizes the target and passes an already-legal name through byte-for-byte, so hosts without the override advertise precisely what they always did. The display name loses `.` (it would split the label, and clients derive the name as the first label of the fullname, so "Ben's PC v1.2" would arrive as "Ben's PC v1") and is capped at the 63-byte DNS-SD ceiling on a char boundary. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> (cherry picked from commit bbf72261a12e0e67601f549d40db65ae61979268)	2026-07-28 17:01:59 +02:00
enricobuehler	188f55d3b1	fix(encode/nvenc): the host advertises what the driver lists, not a superset ... Every NVIDIA host advertised a static H.264|HEVC|AV1 superset, so a 1st-gen Maxwell (GTX 960M, no HEVC/AV1 encode) offered HEVC — a client that believed it got ~15 s of blank video and a disconnect instead of a stream. Both OSes now ask the driver itself (nvEncGetEncodeGUIDs) on one throwaway direct-SDK session: Linux on the shared CUDA context, Windows on the selected render adapter, wired into host_wire_caps AND the GameStream serverinfo mask (which had been left on the superset for NVIDIA on both OSes). Fails open — an unanswerable probe keeps the historical superset, so it can only ever narrow the advertisement to codecs the GPU really encodes. The HEVC 4:4:4 answer rides the same session on Linux instead of opening a libav hevc_nvenc FREXT probe: that open is the prime suspect for the field bug where one probe wedges NVENC process-wide (NV_ENC_ERR_INVALID_VERSION on every later session until a host restart), and the direct backend re-checks the same caps bit at session open anyway. The ffmpeg probe remains only for hosts that really stream over libav (PUNKTFUNK_NVENC_DIRECT=0 or a build without the nvenc feature), where ffmpeg's NVENC client runs regardless. The 10-bit probe deliberately stays libav — Linux HDR rides the libav P010 path. On-hardware: .136 (RTX 5070 Ti) 14/14 nvenc tests in one process incl. the probe followed by real sessions and dirty teardown; .173 (Windows RTX) probe + 47 release lib tests. The Windows probe test documents the pre-existing MSVC debug-link failure (LNK2019 via the sdk crate's unused lazy loader) — run it with --release, the same reason windows-host.yml gates with clippy. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> (cherry picked from commit 0346ec8090568eb499e8cb7d735305b28471185e)	2026-07-28 17:01:59 +02:00
enricobuehlerandClaude Opus 5	560e663aef	fix(drivers): the pad channel asks the devnode who to trust, not the mailbox ... A LocalService principal could take over a virtual pad's shared input section and forge HID input into the interactive desktop. The host duplicates each pad's unnamed DATA section into the driver's WUDFHost, and through gamepad proto v2 it learned that process from `driver_pid` in the named bootstrap mailbox. That mailbox has to be LocalService-writable — that is what the driver's own WUDFHost runs as — and the delivery gate, verify_is_wudfhost, only checks that the target's IMAGE is %SystemRoot%\System32\WUDFHost.exe. That image is world-executable. So anything running as LocalService — notably the deliberately de-privileged plugin runner — could spawn its own WUDFHost (CREATE_SUSPENDED parks it indefinitely with the right image path), publish that pid, and be handed SECTION_MAP_READ|WRITE on a live section. For pf-mouse that section drives a real absolute pointer, so it was desktop control; for the pads it was forged gamepad input plus a read of the remote user's controller state. The module docs claimed mailbox tampering "yields at worst a gamepad DoS, never a read or an injection". That was wrong, and the reasoning behind it — that a LocalService token is DACL-denied OpenProcess on a UMDF WUDFHost — only covers the REAL host, not one the attacker spawned itself. The pid now comes from the device stack (ChannelProof, proto 2 -> 3). The host asks the devnode it SwDeviceCreate'd who is serving it, looked up by the instance id PnP handed back, so a planted look-alike devnode is not a candidate and the kernel — not anything the attacker supplies — does the routing. Only the driver PnP actually bound to that device can answer. `driver_pid` survives as a liveness hint; a tamperer can still deny a pad, which squatting the name always allowed, but can no longer choose the recipient. Two rules keep the state machine honest around it: a delivery stands until its target process EXITS (judged on a retained SYNCHRONIZE handle, so a recycled pid cannot fake it, and UMDF's restart-after-driver-crash still re-attaches), and a pad with no SwDeviceCreate devnode refuses to deliver rather than fall back — unless an operator sets PUNKTFUNK_PAD_CHANNEL_TRUST_MAILBOX, which says so loudly. Three transports, because Windows carries different things to different driver shapes, and the obvious two did not survive contact with hidclass. Measured on .173 (Win11 26200): HidD_GetIndexedString is NOT forwarded to a UMDF HID minidriver at all — it failed for every index including ones the driver demonstrably serves through the named wrappers; and a private device interface registers and enumerates but cannot be OPENED (ERROR_GEN_FAILURE), because hidclass owns IRP_MJ_CREATE on a devnode it is the FDO for. That is exactly why pf-xusb was never affected: it is not a HID minidriver, so nothing sits above it. What works: * pf-xusb — a private IOCTL on its own GUID_DEVINTERFACE_XUSB. * pf-mouse — the HID serial string. Verified: PFCP:3:0:7296, and 7296 was a genuine service-spawned WUDFHost.exe. Safe here alone: nothing reads the virtual mouse's serial, whereas a pad's is SDL/Steam dedup material. * pf-gamepad — a HID feature report, and it cost NO report-descriptor change. The captured descriptors already declare far more Feature ids than the driver ever served: 0x85 is declared on DualSense, DualShock 4 and Edge alike and used to fail with STATUS_INVALID_PARAMETER, so hidclass lets it through and nothing can have depended on the old failure. The Deck's one feature report is unnumbered and Steam drives it command->response, so its proof rides that existing contract via a private two-byte command. Verified: feature 0x85 returned magic "PFCP", proto 3, pad_index 0, wudf_pid 18456 — and 18456 was a WUDFHost — with the product string still 'DualSense Wireless Controller'. Also renamed pf-dualsense -> pf-gamepad. One driver has always served four identities, so the old name read as if the other three lived elsewhere. ONLY the package identity moved (crate, INF/CAT/DLL, UMDF service, build script, CI lines, log file, env var). The four HARDWARE IDS are deliberately unchanged — they bind every devnode the host creates and every installed system — as are the Global\pfds-boot-<i> mailbox and PAD_MAGIC, which are wire contract. `driver install --gamepad` now retires the pre-rename store package first, matched on pf_dualsense.dll because that string appears only in the OLD inf; matching on the hardware ids would delete what we are about to install. On .173 that separated 14 stale packages from the 1 new one with 0 ambiguous, and the renamed package binds the old hwid (devgen root\pf_dualsense -> oem143.inf = pf_gamepad.inf). The repo's own pre-commit/pre-push rustfmt hooks named the old crate, so they caught the rename before the commit did — they now check pf-gamepad, and pf-mouse alongside it, which they had been missing relative to the CI line. Host and drivers MUST ship together: v2<->v3 fails closed in both directions by design, with the existing "update host + drivers together" diagnostic. The rename moved files that also carry the security change, so splitting this into two commits would mean reconstructing an intermediate state that was never gated. It is one commit on purpose. Gated on the windows-amd64 runner with cargo clean first (the box's clock lags, so stale artifacts would read as a vacuous green): clippy -D warnings clean for pf-inject, pf-capture and pf-driver-proto, drivers workspace build + the CI clippy line clean, cargo check --release -p punktfunk-host clean, 19 + 58 tests green. Also fixes pf-mouse still writing its debug log to world-writable C:\Users\Public, which the 2026-07-17 review moved for the other three drivers and missed here. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-28 16:54:40 +02:00
enricobuehlerandClaude Fable 5	9b3ec9204c	fix(capture): a refused EGL→CUDA dmabuf offer stops being asked ... The raw-dmabuf passthrough has had a negotiation-timeout latch since the hybrid-Intel case: one conclusive timeout and later captures negotiate the CPU path instead of re-paying it. The EGL→CUDA dmabuf-only offer had no equivalent — a compositor that accepts none of the importer's modifiers timed out the same 10 s negotiation on every session, forever, under the generic 'format negotiation never completed' diagnosis. Now the symmetric latch (note_gpu_dmabuf_negotiation_failed) gates build_importer in the one negotiation resolver, scoped to this offer alone (raw passthrough, worker-death latch, encoder untouched), with the same operator escape as the raw arm: an explicit PUNKTFUNK_ZEROCOPY=1 keeps erroring loudly instead of downgrading. One correctness detail beyond the handoff's sketch: whether the GPU offer was ACTUALLY advertised is a runtime fact of the PipeWire thread (the importer may fail to construct — no CUDA — in which case no dmabuf was offered and a timeout must not latch it off). plan.build_importer alone cannot answer that, so the thread records the made-offer on CaptureSignals (gpu_dmabuf_offer) and the timeout diagnosis branches on the offer that really happened, not the plan's intent. Also renames vaapi_dmabuf_forced → zerocopy_forced (it now guards both timeout arms; single caller). New plan invariant pinned in tests: the latch gates only the importer, never the raw passthrough. (V3 from design/pf-zerocopy-sweep-handoff.md — the deferred design call, now decided in favour of the symmetric latch.) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-28 13:15:36 +02:00
enricobuehlerandClaude Fable 5	e92a0aaa00	fix(zerocopy/vkslot): a timed-out blend can't corrupt its slot, and NV12 cursor chroma sits on the grid ... Two [GPU]-class defects from design/pf-zerocopy-sweep-handoff.md; the code is compile- and unit-verified, the visual halves still owe on-glass time. - blend_ref reused a fence and command buffer after a wait timeout: on TIMEOUT it reset a fence that still had a pending signal and re-recorded a command buffer the GPU might still be executing — reached exactly in the contended case the CPU-synced path exists for (no timeline export + visible cursor + a >1 s GPU stall). A failed wait now drains the device before the reset (the VkBridge::import_linear precedent), and free_slots quiesces unconditionally instead of only when a timeline exists, so teardown after a timed-out sync blend no longer frees objects an outstanding submission references. (C1) - cursor_blend.comp anchored NV12 chroma blocks to the cursor's oy, not the surface chroma grid: for odd oy every UV sample averaged luma rows one below the rows it covers (a one-row colour fringe on the cursor's edges, ~half of all cursor positions) and the cursor's last row's chroma was never written. Block rows now anchor to the chroma grid the same way spans anchor to the word grid — y0 = floor(oy/2)*2, per-row cy guards for the straddle block — and blend_geometry counts blocks from the same anchor (one extra block when oy is odd; covered by new tests, including negative oy). cursor_blend.spv rebuilt (glslangValidator, spirv-val clean, drift gate passes). (C6) Owed on-glass: a stalled-GPU cursor session for C1; an odd-oy cursor colour check for C6 (subtle fringe on the cursor's top/bottom edge). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-28 13:01:46 +02:00
enricobuehlerandClaude Fable 5	fa083f50d3	fix(zerocopy): unsafe fn bodies join the unsafe-proof program ... #![deny(clippy::undocumented_unsafe_blocks)] never inspected the body of an unsafe fn — operations there are not "unsafe blocks" — so roughly 20 functions' worth of raw GL/CUDA/Vulkan driver calls sat outside the invariant the crate advertises. Concretely, that blind spot is why the constructor-leak and teardown-ordering shapes fixed earlier in this series could ship without ever prompting a reviewer. #![deny(unsafe_op_in_unsafe_fn)] now closes the gap: every unsafe fn body is an explicit unsafe block carrying a SAFETY comment that names the caller contract it relies on (the dlopen'd CUDA wrapper table gets a uniform forward-to-live-table proof). Mechanical; no behavior change. (V2 from design/pf-zerocopy-sweep-handoff.md.) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-28 12:59:15 +02:00
enricobuehlerandClaude Fable 5	c677732c60	fix(zerocopy/client): a wedged worker can't park the reaper, and no worker outlives the host ... Three related reaper problems (R5 from design/pf-zerocopy-sweep-handoff.md): - sweep_reaper called kill() + blocking wait() while holding the global REAPER mutex. A worker wedged in a driver ioctl is in D state and ignores SIGKILL, so wait() never returned — parking every later spawn() and every importer drop() behind the lock. Expired entries are now drained under the lock and killed outside it, with a bounded (~100 ms) try_wait poll; a worker that still won't die is parked again for a later sweep (re-killing is harmless) instead of blocking anyone. - No PR_SET_PDEATHSIG: if the host died, the worker survived holding its CUcontext + BufferPool — by the code's own comment, hundreds of MB of VRAM. The pre_exec closure (async-signal-safe: prctl/getppid/dup2/fcntl only, no allocation) now arms SIGKILL-on-parent-death with the standard getppid race guard. Not taken: arming the 20 s kill deadline from a timer instead of the next spawn/drop (the handoff's optional third leg). PDEATHSIG closes the worst-case orphan; a wedged worker after the LAST capture of a session still waits for the next spawn to be swept. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-28 12:53:43 +02:00
enricobuehlerandClaude Fable 5	3c62da3b8e	fix(zerocopy/client): renegotiation retires the old generation's IPC mappings ... Shared::mappings only ever grew: clear_cache reset sent_keys and told the worker to drop its fd cache, but nothing closed the host-side CUDA IPC mappings for the previous pool generation. A session that renegotiates repeatedly (mode changes, HDR toggles, client reconnects) accumulated a pool's worth of stale mappings each time, each pinning a host VA reservation to peer memory the worker had already freed. Mappings now carry a refcount and a retired flag. clear_cache closes every unreferenced mapping immediately and marks the rest retired; a retired mapping closes when its last in-flight DeviceBuffer releases. The worker's half of the contract: ClearCache also forgets its VA→id map, so anything delivered after the boundary gets a fresh id WITH its descriptor — without that, a same-shape renegotiation (worker keeps its pool) would re-deliver an old id whose host mapping was just closed, and the host would misread it as a desync. Ids never repeat (next_id only counts up), so fresh ids cannot collide with the graveyard. (R6 from design/pf-zerocopy-sweep-handoff.md.) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-28 12:52:42 +02:00
enricobuehlerandClaude Fable 5	a2033d6c82	fix(zerocopy/vulkan): VkBridge bring-up and the CSC build unwind instead of leaking ... VkBridge::new leaked its instance (and past device creation, the device and command pool too) on every error path — reached repeatedly, because a box whose Vulkan device refuses the external-memory extensions retries the bridge on every LINEAR frame. Pre-device failures now destroy the instance explicitly (the VkSlotBlend::new shape); after device creation the remaining objects build into an incrementally-filled struct whose existing Drop tolerates the nulls a partial init leaves (Vulkan destroy calls are defined no-ops on VK_NULL_HANDLE). ensure_csc had the same hole across its six-object pipeline build; the fallible half now fills the Csc front to back and a mid-build failure destroys exactly what was created, leaving self.csc None for a clean retry. (R3 from design/pf-zerocopy-sweep-handoff.md.) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-28 12:49:42 +02:00
enricobuehlerandClaude Fable 5	8d02255703	fix(zerocopy/egl): construction can fail late, so teardown must be structural ... Three unwind holes in the EGL side, all of the same shape — fallible construction over raw handles with no Drop to unwind through — and all retried per frame, so a sustained failure (VRAM pressure is the realistic one) leaked unboundedly: - The GlBlit/Nv12Blit/Yuv444Blit constructors interleave GL-object creation with fallible steps (FBO completeness, CUDA registration, pool allocation). A GlNameGuard now owns every bare GL name until the final struct exists; on unwind it deletes them AFTER the RegisteredTexture locals unregister (declaration order), preserving the unregister-before-delete invariant. gl.rs gets the same treatment for its compile paths: the vertex shader on a fragment-compile failure, the program on a link failure. (R1) - EglImporter::new leaked the DRM render-node fd and the whole gbm_device on every '?' after their creation (most realistically cuda::context() failing on a host where EGL comes up but CUDA does not). Both now live in a GbmDevice with its own Drop: destroy the device, then close the fd. (R2) - EglImporter's manual Drop destroyed the gbm device and closed the fd BEFORE field drops ran the blit destructors, which then called cuGraphicsUnregisterResource/glDeleteTextures against a dead native display — the stale-driver-state class this path once crashed on. The Drop impl is gone; teardown is now purely field order (blits and bridge first, GbmDevice last), and the blit SAFETY comments cite that order instead of the previously-false claim. (R4) (R1/R2/R4 from design/pf-zerocopy-sweep-handoff.md.) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-28 12:47:54 +02:00
enricobuehlerandClaude Fable 5	8de5ba4092	test(zerocopy): the fd must actually cross the socket, not just claim to ... SCM_RIGHTS descriptor passing is the mechanism the whole worker isolation design rests on, and no test verified it end to end: both suites asserted only the has_fd boolean parsed from the JSON body. Setting the send-site's descriptor to None — zero-copy broken in production — stayed green; so did dropping the received fd in the worker's dispatch loop. Now the client-side scripted peer records the st_ino of every descriptor that arrives and the tests assert the sequence against dmabuf_key() of the sent plane (SCM_RIGHTS re-numbers the fd but preserves the open file description, so the inode is the identity the worker keys its cache on); the worker dispatch test sends one import with a live fd and asserts the backend received a descriptor with the sender's identity. (T1 from design/pf-zerocopy-sweep-handoff.md) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-28 12:43:39 +02:00
enricobuehlerandClaude Fable 5	143a707f76	fix(zerocopy): the mechanical sweep batch — truthful fence waits, forgiving env flags, no leaked planes ... From the pf-zerocopy review sweep (design/pf-zerocopy-sweep-handoff.md), the compile-verifiable batch: - dmabuf_fence: the blocking poll's result was discarded — EINTR silently skipped the wait (reopening the stale-frame race a SIGCHLD away) and a timeout reported as waited. Now EINTR retries with the remaining budget and the caller gets Signaled/TimedOut/NoFence, so the one diagnostic operators have about implicit fencing stops lying. (C2) - env flags: PUNKTFUNK_ZEROCOPY=TRUE meant *off* — values are case-folded now, and an unrecognised spelling falls back to the flag's default with a one-shot warning instead of silently inverting the operator's intent. (C3) - cuda: alloc_pitched_nv12 leaked the Y plane when the UV allocation failed (per-frame under VRAM pressure — the worst possible time to leak); a failed async-copy enqueue now drains the stream before returning, so a recycled pool buffer can't race an orphaned in-flight copy. (C4, C5) - worker: --fd is validated (>= 3, fstat + S_ISSOCK) before OwnedFd adoption — 'zerocopy-worker --fd -1' was constructing OwnedFd's niche value. (V1) - docs: all 15 rustdoc warnings fixed, including the link to the renamed note_raw_dmabuf_negotiation_failed. (D1) - CI: a SPIR-V drift gate — the committed .spv blobs are include_bytes!'d and rebuilt by hand; the gate diffs disassembly (filtering only the shaderc/glslang generator difference) so a forgotten rebuild fails CI instead of shipping the old kernel. Both blobs verified in sync. (S1) - tests: bt709_limited pinned to external BT.709 anchors (it is the sole oracle for the GPU colour self-test); blend_geometry gets its first tests — empty rect, CURSOR_MAX clamp, per-format group counts, and negative-ox floor alignment. (T2, T3) Verified on .25: clippy -D warnings clean, 27/27 tests, cargo doc 0 warnings. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-28 12:40:37 +02:00
enricobuehlerandClaude Opus 5	a98174ebfa	feat(host): anchor-test, and libei says which output absolute input landed on ... The absolute-region ladder existed for one case a unit test can only simulate — two heads of the SAME size, where matching a libei region by the streamed mode is a coin flip — and that case had never been run against a real compositor. It was also unobservable: the log said which regions the EIS server offered, never which one a coordinate went into, so "the pointer is on the wrong monitor" could only be discovered by looking at a monitor. libei now reports the chosen region once per distinct answer, beside the existing miss warning: one covers an anchor that named nothing, this one covers an anchor that matched something, by saying which. `anchor-test` is the gate that reads it, in the shape mirror-test established: it enumerates the heads, SAYS whether the rig actually has two of the same size (a green run on a single-head box proves nothing), anchors at a named one (or `--none` for the A/B that makes the anchored run mean anything), and walks the corners. It refuses to run off libei rather than emitting a green result about a ladder that isn't there. On-glass on KWin 6.7.3 with `kwin_wayland --virtual --output-count 2` (regions 1920x1080+0+0 and +1920+0): unanchored picks +0+0, anchored at Virtual-1 picks +1920+0, anchored at Virtual-0 picks +0+0. That is open item 3 of design/per-monitor-portal-capture.md §8b, closed. Clearing the pin now logs too — setting one always did, and the streamed screen going back to virtual is the same size of change. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	45f04f50fe	test(mgmt): gamescope reports no monitors, and that is not a missing explanation ... /display/monitors must never answer empty AND silent — the console reads that as "the host is broken". But gamescope is nested: it owns no physical heads by construction, so empty-and-silent is the correct answer there, not an unexplained one. Any dev box that has ever been in game mode keeps gamescope-0 sockets in its runtime dir, so detect() resolves gamescope and the test failed on the machine rather than on the code (found running the suite on .136). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	6afc05155b	feat(vdisplay/session): derive SWAYSOCK — the last session var a --user host lacked ... Session detection already hands every backend the live session's env: WAYLAND_DISPLAY from a socket scan, XDG_RUNTIME_DIR from the uid, the session bus, XDG_CURRENT_DESKTOP, and Hyprland's instance signature. sway was the exception — SWAYSOCK had to be INHERITED from the login shell, so a systemd --user host that never saw one had no sway IPC at all: no output enumeration, no capture chooser, no wlroots backend (its is_available() keys off that very variable). It is derivable, and by identity rather than guess: sway names its socket sway-ipc.<uid>.<pid>.sock, and detection already knows the compositor PID. Ladder: a valid inherited value, then the exact PID's socket, then the newest one we own (a sway re-exec can leave the name pointing at a PID we didn't see). None on river — the other wlroots desktop ships no sway IPC, and saying so is what stops apply_session_env exporting a SWAYSOCK that points at nothing. Closes the session-env half of design/per-monitor-portal-capture.md §6 for a desktop-login host: nothing has to be exported for the host to find its session. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	829bcb7962	fix(gamestream): the streamed-screen pin applies to the portal source too ... PUNKTFUNK_CAPTURE_MONITOR is documented as "instead of creating a virtual display OR taking whichever head the portal hands back", and the console presents it as a host-wide setting. The compat plane's portal source did neither: it went straight to the chooser, so a Moonlight client on a pinned host silently got whatever screen the portal picked. That is the one outcome the whole feature exists to prevent — showing the wrong monitor is worse than showing none. The portal arm now mirrors the pinned head instead, through the same MirrorDisplay the virtual source reaches via vdisplay::open. It launches nothing and creates no virtual output, so it needs neither the game-lifetime machinery nor the registry (External ownership passes through it anyway). Which screen a pooled capturer is showing is now the third reuse key beside HDR-ness and cursor mode. The pin is a LIVE setting — the console can re-aim the host between two connects — so without it in the key the second connect would keep streaming the previous screen, which is the same silent-wrong-monitor failure by another route (§7.3, open item 5). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	de3ef50434	fix(native): a mirrored monitor has a fixed mode — refuse to resize it ... A physical head runs at the mode its owner set, and MirrorDisplay::create ignores the requested one on purpose. So a mid-stream Reconfigure against a mirror could only ever tear the cast down and rebuild the identical one at the identical size — a hitch that buys nothing, and an invitation to the worse reflex of reconfiguring the display someone is sitting at. reconfig_allowed grows a third gate beside gamescope and per-client-mode identity, and the session captures it at bring-up like the others: this session opened its display under whatever the pin said then, so a console change mid-session must not retroactively change the answer it gives. Linux-only, because vdisplay::open only routes to the mirror there — a pin left in a Windows host's settings streams nothing different and must not disable resize as a side effect. design/per-monitor-portal-capture.md §7.3, open item 4. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	b08226dbf1	feat(vdisplay): mirror a pinned monitor on sway and Hyprland ... P5 of design/per-monitor-portal-capture.md, and the end of a hole worth naming: the pin was accepted, persisted and offered in the console while `create` bailed on these two backends, so a sway or Hyprland host with a monitor selected failed EVERY session. Both already ship the mechanism — a managed portal-chooser config plus a per-session selection file (xdpw's `Monitor: NAME`, xdph's `[SELECTION]screen:NAME`) — so mirroring is that same chooser pointed at a physical connector instead of a headless output we created. The keepalive stops the cast and nothing else; the monitor is the compositor's. The selection write is now serialized against the handshake that reads it (SELECTION_LOCK, applied to the virtual-output paths too). That file is one per-user path: whoever writes last before the portal reads wins, and the loser does not fail — it silently captures the other session's output. `managed` is no longer grounds for refusal everywhere. It is conclusive only where the name is ours by construction (KWin's `Virtual-punktfunk`, Hyprland's `PF-N`); sway names EVERY headless output `HEADLESS-N`, its own included, so the old rule would have refused to mirror any output on a headless sway box — exactly the remote setup this feature serves. Found on-glass, and now a test. Verified on a two-output headless sway: asking for HEADLESS-1 yields 1280x720 frames and HEADLESS-2 yields 1920x1080, so the chooser really does steer per request. Hyprland is compile-only — no Hyprland box exists. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	d461d889c3	feat: the streamed screen is a persisted setting, pickable from the console ... P4 of design/per-monitor-portal-capture.md. The pin was an env var read once at startup, which a console picker can never write — so it becomes a field of the display policy (orthogonal to presets, like game_session), and `vdisplay::capture_monitor()` resolves env-over-policy: an appliance that pinned in its unit's host.env stays pinned there, and a console click cannot re-aim a machine whose operator already declared the answer. Read per `open` rather than cached, so a picker change takes effect on the next session instead of the next host restart. The host re-resolves the input anchor on every policy write — including clearing it when the pin is cleared, or a later virtual-display session inherits an anchor aimed at a monitor it is not showing. `with_manual_layout` carries the pin through like the other orthogonal axes: without that, saving a display ARRANGEMENT would silently swap the streamed screen back to virtual. Console: a "Streamed screen" card listing the host's real monitors beside "Virtual screen (default)", saving on selection. A disabled head is listed but not selectable (so "why isn't it here?" has an answer), and an env-pinned host renders read-only with the reason rather than offering controls that silently lose to the environment. Verified on GNOME/Mutter: pinning via the policy file alone (no env) routes sessions to the mirror and anchors input; setting the env to a different connector overrides it, exactly as documented. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	358cfa4be4	feat(host): mirror-test — the on-glass gate for per-monitor capture ... Opens the display backend exactly as a session would, attaches a capturer and reports the frames a named head actually produces, with no client involved. `--monitor` names the head explicitly (it cannot go through PUNKTFUNK_CAPTURE_MONITOR: pf_host_config parses the environment once and startup already read it, so a tool setting it for itself would still see the old snapshot — hence vdisplay::open_mirror); with no argument it exercises the production routing through the pin. A frame timeout is NOT treated as failure. Compositor capture is damage-driven — the host's own capture diag logs new_fps=0 for virtual outputs on an idle desktop for exactly this reason — so the first version of this tool ended its measurement on the first idle gap and made a working mirror look like a 2-frame stall. Verified on KWin 6.7.3 (home-nobara-1), mirroring HDMI-A-1: 346 frames in 20s at 1920x1080, arriving while input was injected and pausing when the desktop went quiet, on both the CPU (BGRx/MemFd) and zero-copy (NV12 dmabuf) paths, ownership=External. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	045deaf77a	fix(vdisplay/kwin): bind the output-device REGISTRY — KWin 6.7 stopped ... advertising per-output globals Found on-glass while testing monitor enumeration: KWin 6.7.3 advertises kde_output_device_registry_v2 and NOT one kde_output_device_v2 global per output. This module only ever bound the globals, so on a current KWin it saw zero devices. That is not just an enumeration gap — it silently disabled the whole in-process output-management path, which exists precisely because kscreen-doctor wedges. The live 0.19.2 host on the test box logs "kde_output_management unavailable — kscreen-doctor fallback" on EVERY session, so every topology apply there has been going through the tool this module was written to stop using. Both models are supported now: the per-output globals older KWin sends, and the registry's `output` events. Devices from the registry arrive a round later than globals do, so the handshake takes one more barrier — skipped when nothing is still awaiting its `done`, so the classic path costs nothing. Verified on KWin 6.7.3: enumeration now reports HDMI-A-1 1920x1080@60 at +0,+0 scale 1.35 primary, matching kscreen-doctor exactly. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	bf2f54a5fe	feat(vdisplay): mirror a pinned monitor on Mutter, and scope the HDR probe ... P3 of design/per-monitor-portal-capture.md. Mutter's mirror is the same private ScreenCast session the virtual path already drives, one call different — RecordMonitor instead of RecordVirtual — so it inherits what makes that path work headlessly: a direct D-Bus API that needs no interactive approval, unlike the xdg portal a background service could never answer. Deliberately not under TOPOLOGY_LOCK: that serializes operations which add or remove a monitor or apply a monitor configuration, and mirroring does neither. Nothing is created, no layout changes, and teardown is just Stop — the SIGSEGV-adjacent ordering the virtual path must observe cannot arise when no monitor is being removed. The GNOME HDR probe now honors the pin. Asking "is ANY monitor in BT.2100 mode" was fair while capture took whatever head it was handed; once the operator names one, an HDR TV on the next connector must not talk the host into offering PQ formats for the SDR panel it is actually streaming. A pin that names no live head reports SDR rather than falling back to "any" — the session is about to fail on that same missing monitor, and an over-claimed HDR offer would be a second, quieter wrong answer. ⚠️ RecordMonitor's exact signature is read from the interface, not yet confirmed against a live gnome-shell; no GNOME box was reachable. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	53c772702f	feat(host): list-monitors CLI, and two bugs it caught on-glass ... An operator configuring an unattended host has to learn the connector names from somewhere, and "curl the management API before the host is configured" is not it. `punktfunk-host list-monitors` prints them with geometry and flags the pinned one. Running it under a real sway immediately caught two defects the unit tests could not: - the query used the `swaymsg` command helper, which inserts `--`, so `-t get_outputs` came back as "Unknown/invalid command '-t'". Queries now go through a `swaymsg_query` helper that cannot make that mistake. - compositors write the literal "Unknown" rather than leaving make/model empty, so the picker label read "Unknown Unknown". One `describe` helper now treats that as absent, for all four backends. Verified on a headless two-output sway: names, modes, positions, scale and the case-insensitive pin all resolve. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	93c2765db7	feat(vdisplay): mirror a pinned physical monitor on KWin ... P2 of design/per-monitor-portal-capture.md. zkde_screencast's stream_output records an output KWin already has — the connector name IS the selection, so there is no dialog, no portal and no chooser for a background service to answer. It arrives as a VirtualDisplay reporting DisplayOwnership::External, which already means "someone else's display, merely mirrored: no keep-alive, no topology, no reuse". So the rule that we must never disable, move or "restore" a monitor the user is sitting in front of holds by construction rather than by everyone remembering it — and create() ignores the client's requested mode for the same reason: a panel runs at the mode its owner set. Routing lives in vdisplay::open, the one place every session opens a display, so the pin cannot be honored on one plane and ignored on another. The host sets the libei anchor from the same pin (pf-vdisplay must not depend on pf-inject), which is what makes absolute input land on the mirrored head instead of a same-sized neighbour. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	2eeee650b9	fix(inject/libei): absolute coordinates resolve by identity, not by size ... libei hands the injector one region per logical monitor with no output name attached, so picking one meant matching the streamed mode's SIZE — a coin flip the moment two heads share a mode, and it already resolved wrong on-glass once (GNOME, a dummy HDMI beside the virtual primary: the seat cursor never entered the streamed monitor, so neither cursor path could see it). The ladder is now mapping_id -> origin -> size -> first. Two outputs can share a size but never a top-left, and a mirrored head's region is not the client's size at all, so the size rung cannot find it — this is what makes per-monitor capture land its input on the monitor it is showing. An anchor that matches nothing falls back down the ladder rather than stranding input: the region set is the truth and the anchor is our belief about it. It warns once per distinct anchor, because the failure this exists to prevent is a pointer that silently lands elsewhere. P1 of design/per-monitor-portal-capture.md — mechanism and tests only. Nothing sets an anchor yet; the pin wires it in P2, and the doc comment records why it is host-level and not per-session. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehlerandClaude Opus 5	95e3314d9a	feat(vdisplay): enumerate the host's physical monitors ... P0 of per-monitor capture (design/per-monitor-portal-capture.md): nothing in the tree could answer "what heads does this host have?", which both a monitor pin and a console picker need first. One read per compositor, each beside the code that already speaks that dialect: KWin's kde_output_device_v2 (the topology session now also records geometry + scale), Mutter's DisplayConfig.GetCurrentState, swaymsg get_outputs, hyprctl monitors. Logical geometry throughout, because x/y is what identifies a head — two monitors can share a size but never an origin. PUNKTFUNK_CAPTURE_MONITOR parses here and is reported at startup, loudly including that it is not yet enforced: a knob that is read but inert has to say so, or "it didn't work" reads as a bug. GET /display/monitors always answers 200 with an explained empty list, so a compositor-less host renders as "nothing to pick", not as a broken console. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 23:51:41 +02:00
enricobuehler	6be865f33f	fix(host): a host that is stopped hands the box's session back first ... Until now the host had no signal handling at all: SIGTERM killed it outright. That is fine for a host that owns nothing — but a managed gamescope takeover owns the box's session, and on a mask-fragile display manager (Nobara's plasmalogin) it has STOPPED that display manager for the length of the stream. Killed there, the host leaves a box with no graphical session and nothing left to restart it: the crash-restore state lives in $XDG_RUNTIME_DIR, which logind removes along with the user manager, so not even the next host start can heal it. `systemctl --user restart punktfunk-host` mid-stream — or a package update doing it for you — was enough to strand a box until someone reached a VT. So SIGTERM and SIGINT now restore first and exit after. The restore runs on a blocking thread (it shells out) under a 20s grace, well inside systemd's TimeoutStopSec, and a host that took nothing over exits immediately. `restore_takeover_now` is the synchronous sibling of the debounced disconnect restore, and deliberately ignores the keep-alive policy the latter honors: `keep_alive=forever` pins a session for the NEXT client, which means nothing once the host that would serve them is exiting. Both paths now share one `takeover_live()` predicate instead of repeating the four-way "is anything ours" test. Checked on Linux: clippy -D warnings on punktfunk-host + pf-vdisplay, tests, rustfmt.	2026-07-27 19:04:20 +02:00