2609 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
enricobuehler	413a3e3e76	feat(client): say which GPU can do Vulkan Video, and why not when it can't ... Field report from an Intel Arc + NVIDIA laptop: pinning the Vulkan rung on the Arc iGPU silently produced D3D11VA, and there was no way to tell whether the build had tried at all. That ambiguity was ours, in three places. The "unavailable" log printed three of the FIVE conjuncts that gate Vulkan Video. A device with 1.3, the features and a decode queue family — but no codec extension — logged dev_is_13=true features_ok=true decode_family=true next to the word "unavailable" and named nothing actionable. It now prints all five, plus which base extensions are missing, which codec extensions are present, the decode family's own advertised codec operations, and the device name and vendor. It also no longer says "VAAPI/software" on Windows, where the rung below is D3D11VA. The native-vulkan PIN refusal logged `video_decode` alone. On a device that decodes something but not THIS codec, that reads as a contradiction: refused, yet video_decode=true. It now carries the caps mask and the codec bit that was wanted, so "your GPU can't" is distinguishable from "we asked for the wrong thing" — only the second is our bug. And `--probe-decode` is new: per-adapter Vulkan Video capability with no session, no surface and no logical device. For each GPU it answers usable yes/no, the driver's own decode ops, the extensions, and — when the answer is no — which conjunct failed, in words. Separate from --list-adapters, which the desktop shells parse line-by-line for their GPU picker and which therefore keeps printing bare names. The listing is ordered like pick_device (discrete first) and marks entry 0 as the default presenter, because that ordering is very likely the reporter's actual answer: pick_device ranks DISCRETE_GPU above INTEGRATED_GPU, Vulkan Video decodes on the PRESENTER's device by design (that is what makes it zero-copy), and PUNKTFUNK_DECODER does not move the presenter. So on a hybrid laptop, pinning the decoder while the dGPU presents probes the wrong GPU entirely — PUNKTFUNK_VK_DEVICE=<index> is the knob that moves it, and the index printed is that value. To keep the probe honest, VIDEO_BASE and VIDEO_CODECS moved to module scope and the five-way AND became video_decode_gate(), called by both the probe and device creation. A probe holding its own copy of the rule is one that eventually reports a capability the session then refuses — which reads to everyone as a decoder bug rather than a probe bug. Gates: fmt clean; clippy -D warnings over punktfunk-client-session and pf-presenter. The Linux container was unavailable (the host's disk filled and took the docker daemon with it), so this ran on the macOS host target only — the container leg is owed, and CI covers it on the PR.	2026-08-07 12:42:33 +02:00
enricobuehler	f7ef41b45b	Merge pull request 'feat(clients): the phone's gyro can speak for a gyro-less pad' (#88) from worktree-gyro-phone-mirror into main ... Reviewed-on: #88	2026-08-07 09:47:04 +00:00
enricobuehler	55aba3e936	feat(client/android): the phone's gyro can speak for a gyro-less pad ... Opt-in "Gyro from this phone" (gyro_on_phone, off by default): this device's IMU sources wire pad 0's motion while that pad is a controller with no motion source of its own. On Android that gate is exact — the only pads that forward motion are the capture links (USB DualSense / SC2, claimed as ExternalPads), so the mirror stands down per sample whenever GamepadRouter.padHasOwnMotion(0) says a capture link holds the index, and sends nothing while pad 0 has no slot at all (motion never creates a host pad). "Rumble on this phone"'s sibling, data flowing the other way: same read-once-at-attach settings plumbing, same hardware-gated rows in the touch and controller settings (a TV box has no gyroscope to mirror from). DeviceGyro registers TYPE_GYROSCOPE + TYPE_ACCELEROMETER at ~200 Hz on a dedicated HandlerThread with batching disabled (maxReportLatencyUs = 0 — batching is poison for gyro aim), converts with the wire contract shared with pf-client-core (rad/s → 20 LSB/°·s, m/s² → g → 10000 LSB/g; Android's accelerometer already reads specific force, the DualSense report's own convention), and rotates each sample from the natural-portrait sensor frame into the controller frame by display rotation — a phone clipped landscape yaws when the player yaws instead of rolling. The remap matrix and unit constants are pinned by DeviceGyroTest. A stand-down edge (capture link claims pad 0, or session teardown) sends one zero-gyro sample so the host's virtual pad never keeps integrating an angular velocity this device stopped producing — the gyro sweep's stale-rotation latch, avoided by construction here.	2026-08-07 11:38:31 +02:00
enricobuehler	1f54b75c5c	feat(client/apple): the phone's gyro can speak for a gyro-less pad ... Opt-in "Gyro from this device" (DefaultsKey.gyroFromDevice, off by default, iOS only): while player 1's forwarded controller reports no rotation rate of its own — no GCMotion, or the gravity-only motion an Xbox pad exposes — this device's IMU sources pad 0's wire motion instead. The rumble-on-device mirror's sibling, data flowing the other way: same session-scoped UserDefaults read, same hardware-gated settings rows, same pad-0 rule. DeviceGyro wraps CMDeviceMotion at the ~100 Hz CoreMotion ceiling on a dedicated serial queue (not main — the controller path's main-queue delivery is a known jitter source), converts with the shared GamepadWire constants, and rotates each sample from the device's portrait frame into the controller frame by interface orientation, so a phone clipped landscape yaws when the player yaws instead of rolling. The remap matrix is derived and pinned by DeviceGyroRemapTests. GamepadCapture owns engage/stand-down (reconcile, suspend/resume, stop), and suppresses pad 0's controller-motion forwarding while the mirror runs — two writers on one pad's motion state would fight, and the accel-only stream would stomp the mirror's gyro with zeros. Also fixes the stale-motion latch from the gyro sweep on the controller path: flush now parks motion at zero (keeping the last accel, so gravity doesn't become free-fall), and the mirror's stop sends the same closing zero. The host holds motion as state and re-emits it — a nonzero angular velocity left behind read as endless rotation for as long as an overlay (Control Center pull-down) kept the app inactive.	2026-08-07 11:38:13 +02:00
enricobuehler	c6b183450a	Merge pull request 'docs: the 4:4:4 story catches up with the code that ships it' (#87) from worktree-docs-support-matrix-444 into main ... Reviewed-on: #87	2026-08-07 09:27:32 +00:00
enricobuehler	3a35773b70	Merge origin/main; 4:4:4 has no software floor, and the ABI is 17 ... Reconciling with #85 (FFmpeg is gone from the client). Two of my claims were true against the pre-merge tree and false against this one. Note 4 said the desktop clients need no 4:4:4 decode probe "because every rung can display full chroma — swscale converts for the software rung". There is no swscale any more. The CPU floor is openh264 + rav1d, it is 4:2:0 8-bit by contract and has no HEVC at all, so it refuses a 4:4:4 stream rather than converting one. The client still advertises the bit unprobed, which was the point of the original fix, but the honest reason is different: full chroma is a hardware path (Vulkan RExt, NVIDIA today), and what catches a box whose hardware 4:4:4 fails is note 2's codec reconnect, not a downgraded picture. Note 13 repeated the same wrong premise and now names both halves of its warning. The C ABI is 17, not the 14 I read before the merge. Textual side of the conflict: #85 rewrote the Codecs column and notes 1-3 of the same table while leaving note 4's stale 4:4:4 text alone. Theirs kept in full; only the 4:4:4 column and note 4 are mine.	2026-08-07 11:25:17 +02:00
enricobuehler	5aa1ca392e	Merge pull request 'fix(host/encode): the Windows host build stops failing on unused split-encode helpers' (#86) from worktree-fix-winhost-clippy-dead-code into main ... Reviewed-on: #86	2026-08-07 09:22:57 +00:00
enricobuehler	b245cb6b29	Merge pull request 'FFmpeg is gone from the client — native decode M0–M10' (#85) from worktree-native-decode-m0 into main ... Reviewed-on: #85	2026-08-07 09:21:45 +00:00
enricobuehler	f49f22a292	fix(host/encode): the Windows host build stops failing on unused split-encode helpers ... The Windows host job died in its clippy step: eight items in pf-encode's split-encode policy (`SPLIT_AUTO`..`SPLIT_DISABLE`, `resolve_split_mode`, `max_forced_split_mode`, `clamp_to_engines`) were reported as never used, and `-D warnings` turns that into a build failure. Nothing about the encoder was wrong — the items simply have no reader in one particular build of the crate, and nothing was telling the compiler that. `codec.rs` compiles on every platform, but the split policy only ever has a caller on Linux (the libav NVENC path reads it unconditionally) or on Windows with the `nvenc` feature (the direct-SDK backend). A featureless Windows build of pf-encode has neither, so every item in the cluster is genuinely dead there. Gate them on the union of their callers' cfgs, the way `forced_split_width` next door already is. The step lints pf-encode itself WITH `--features nvenc,amf-qsv,qsv`, where the items are live, which is why this was invisible there; the failure came from the next command in the same step, `clippy -p pf-vdisplay`, which pulls pf-encode in as a plain default-features dependency. Same item-level `dead_code` trap this crate has now hit five times. Verified: default-features pf-encode reproduces all eight errors before the change and none after (macOS default-features exercises the identical "cluster has no caller" arm as featureless Windows — the two remaining errors there, `vbv_frames_env` and a redundant closure call, are pre-existing and macOS-only; both items have real Windows callers). Linux default-features and Linux + nvenc `--all-targets` both stay clean, so the callers still see the policy. `cargo fmt` clean.	2026-08-07 11:11:15 +02:00
enricobuehler	f1e7ec3535	docs: the 4:4:4 story catches up with the code that ships it ... The support matrix said the desktop clients' Full chroma switch "has no effect today" and that only the Apple client asks for 4:4:4. Both stopped being true in July: `clients/session/src/main.rs` advertises VIDEO_CAP_444 whenever the setting is on, deliberately with no client-side probe, because every desktop decode rung can display full chroma — the Vulkan presenter samples the 2-plane 4:4:4 pool formats and swscale converts for the software rung. So Linux, Windows and Apple all ask; Android is the one that genuinely doesn't implement it. The other half was HDR. `9f72a3b6` gave the Windows IDD-push capturer a packed 10-bit BT.2020 PQ RGB output, so NVENC encodes HEVC Main 4:4:4 10 and the two compose — the matrix still said "4:4:4 and HDR together is refused", and hdr.md still called PyroWave the only exception. Linux is the side that keeps the trade: handshake.rs resolves the depth back to 8 for a 4:4:4 session, so full chroma wins and the stream is SDR. Three cells move ❌ → ⚠️ rather than ✅ on purpose. The client half is unconditional, but the host half is not: HEVC 4:4:4 means an NVIDIA host, or PyroWave on any vendor. The notes say which, and point at the stats overlay's `4:4:4→4:2:0` tag — this negotiation is the one that fails loudly. Also: C ABI version 13 → 14; PyroWave's ≈8K 4:4:4 block-index ceiling now has a note; and the roadmap no longer calls Intel 4:4:4 a hardware limit, which the matrix and vaapi.rs both contradict — VCN can't, VAAPI hasn't. Spot-checked and left alone as still accurate: the Linux client clipboard stub, VAAPI declining 4:4:4, Android having no 4:4:4 at all, and the wire / driver / gamepad-channel versions.	2026-08-07 10:58:58 +02:00
enricobuehler	bbbcf321e5	Merge origin/main into worktree-native-decode-m0 ... main moved 93 commits while this branch ran. Two conflicts, both where main's new work sat next to M10's excision: packaging/flatpak/io.unom.Punktfunk.yml — main added the vendored gamescope WSI layer (the only route to HDR on a Deck) and, before it, a vulkan-headers module. Took both: this branch predates them and deletes neither. But the headers module's stated consumer was pf-ffvk's bindgen over FFmpeg's hwcontext_vulkan.h, and M10 deleted pf-ffvk — so it now reads as dead weight to the next person. It is not: the WSI layer IS a Vulkan layer, compiles against those headers, and builds after it, so module order is the dependency. Rewrote the rationale to say so, including why dropping it would be expensive to discover — flatpak.yml has no pull_request: trigger, so a manifest break reaches main invisibly and a tag then ships no Linux flatpak. Also recorded that the native decoder needs nothing from there: pf-vkdecode reaches Vulkan through ash, which is pure Rust bindings, no bindgen, no C headers. crates/pf-console-ui/src/screens/settings.rs — main restructured the gamepad settings into TABS, which removed the per-row section headers; this branch had left Some("Video") untouched from the merge base and added the pre-M10 decoder migration next to it. Git could not tell those apart. Took main's structure (no header, its deliberate change) with this branch's migration layered on: a stored `vulkan`, `vaapi` or `d3d11va` names no preset in the tabbed list and would render as "—", then silently rewrite the user's preference on the next save. Gates on the merged tree, Linux container: fmt clean; cargo check --workspace --all-targets clean; clippy --workspace --all-targets -D warnings clean; tests green across pf-vkdecode (187), pf-client-core (163), pf-console-ui (58) and punktfunk-host (447 of 448 — the one failure is the pre-existing gamestream::stream::tests::sender_delivers_batches, a UDP-loopback EINTR under qemu that fails identically on a pristine HEAD).	2026-08-07 10:50:32 +02:00
enricobuehler	3608de25ed	Merge pull request 'fix(ci): runner hygiene stops eating its own jobs' (#84) from worktree-ci-runner-hygiene into main ... Reviewed-on: #84	2026-08-07 08:37:42 +00:00
enricobuehler	75dfab1d35	fix(host): a reconnecting session inherits its launch instead of starting it again ... Two defects, found while tracing M8's codec-fallback reconnect and recorded verbatim in d5e23146 as out of scope there. A client retry re-sends Hello::launch verbatim, and the host launched unconditionally. Steam and Epic URIs hide it — the launcher focuses the running copy — but a gog:/custom: target really did start a SECOND COPY of the game. The client cannot fix it by dropping the field: on Linux the per-session gamescope is re-adopted through pf-vdisplay's display registry, whose reuse key includes the launch command, so a retry without it orphans the running game. And the retry minted a fresh launch_stamp, so procscan refused to adopt a game started more than 2 s before it — the game was minutes old, so a reconnected session had no game-exit detection for the rest of its life. Both are now answered by a launch registry (launchreg.rs): one record per (client fingerprint, library id), written at launch time and INDEPENDENT OF THE TERMINATION POLICY. That independence is the point. The existing fingerprint-keyed reclaim only exists under GameOnSessionEnd::Always — under the default Keep, arm_grace is never called, so nothing was recorded at all in exactly the configuration the defect was reported in. The design correction that matters: at launch time the host knows NOTHING about the game's processes — that is the premise of the whole lease design. So identity flows BACKWARDS from the watcher, which publishes the concrete ProcRefs it adopted, and the registry's liveness is Scanner::alive over that recorded set, re-verified by (pid, start). Never a re-scan by spec: a later scan would find a copy the player started since, and adopting that is what procscan's rule 1 forbids. The published set is never cleared on exit either — the last thing the watcher saw is what makes a quit game read Gone rather than "no opinion", which is how it becomes relaunchable at once instead of being suppressed for the window. On rule 1: an adopting session inherits the older floor, so its own find() admits what the ORIGINAL session's lease already admitted for its whole life. That is the correct reading of "the same launch, continued" and not a new exposure — rule 1 forbids adopting processes that PREDATE the launch, and these postdate it. The match rule is pure and total (covers()): liveness is authoritative where it has an opinion, and only Unknown falls through to the tie-breakers — a live holder, or a 90 s in-flight window for a re-dial while the launcher is still working. Gone beats both, deliberately: a title that crashed on startup must relaunch at once. Both race orders are handled and neither is relied on. Teardown-first takes the Running arm; handshake-first (a fast re-dial on a half-open connection) takes the holders>0 arm, and the old teardown then sees superseded() and does nothing — without which, under Always, it would arm a grace the new session had already passed its chance to reprieve, and the reaper would kill the new session's game. Two tradeoffs taken deliberately: a custom: command with no detection hints stays Unknown forever, so that reconnect trades game-exit detection for not double-spawning; and IN_FLIGHT_WINDOW is a fixed 90 s rather than sharing disconnect_grace_seconds, because the two have opposite failure costs — grace being wrong leaves a game running, this being wrong silently swallows a launch the player asked for. Gates: fmt clean; clippy -p punktfunk-host --all-targets -D warnings green in the Linux container; 418 passed, +9 exactly the new tests. One failure, gamestream::stream::tests::sender_delivers_batches, is pre-existing and environmental — a UDP-loopback EINTR under qemu at stream.rs:1697, outside every hunk in this change (the last is at +448), and it fails identically on a pristine HEAD. I reproduced both the failure and its location myself rather than taking it on report. ⚠ OWED: the Windows leg is COMPILE-UNVERIFIED. cargo check --target x86_64-pc-windows-msvc dies in ring's C build on macOS and xcheck.sh does not cover punktfunk-host. The Windows edits are small restructures of existing branches plus a bool assignment, reasoned through but seen by no compiler. Run it on .133 before this merges. I narrowed that exposure by inspection afterwards, and it is smaller than the blanket warning suggests. The change presents exactly two things to a Windows compiler that a Linux one did not already see. launchreg gates only alive_count (lines 227/231), whose cfg(any(linux, windows)) arm calls Scanner::system().alive(procs) — the identical call gamelease.rs:563 already makes in code that compiles on Windows today. And the Windows launch arm at native/stream.rs:1666 reads only ungated bindings the Linux arm type-checks thirty lines below it (adopt_launch:1658, spawned_now:1663, launch_claim:1463) and calls only the pre-existing library::launch_title. No new type, no new signature, no Windows-only API. That is an argument, not a compile. The run on .133 is still owed.	2026-08-07 10:14:21 +02:00
enricobuehler	138a1f1b2f	fix(host/windows): the staging-dir SID checks document their unsafe blocks ... clippy's undocumented_unsafe_blocks (deny) flagged the three blocks that 81039581 introduced: the SAFETY comment sat outside the closure, so IsValidSid/EqualSid inside it read as undocumented, and from_raw_parts shared a comment that only covered the GetLengthSid line above it. Windows host clippy is the only leg that lints this cfg(windows) code, red since.	2026-08-07 10:11:04 +02:00
enricobuehler	39cfb7234c	fix(ci/docker): a cache-hit builders job stops failing on a login it never uses ... The LAN-registry docker login only serves the Push step (Reconcile and Tag-for-release authenticate via curl -u), but it ran unguarded — so a hit=true leg landing on a host with a misconfigured docker daemon failed at login with nothing to push (run 16044/16013 f44 leg). Gate it like Build/Push.	2026-08-07 10:11:02 +02:00
enricobuehler	c3cdee9bf5	fix(ci/prune): the 2-minute image prune stops deleting images mid-pull ... docker image prune -af --filter until=2h keyed on image CREATION time, so a base image built days ago that merely had no container at that instant was "aged" — including one a job had just pulled and not yet created. Measured 2026-08-07: three job failures, each coinciding with a prune tick to the second ("No such image: …punktfunk-rust-ci:latest", every step cancelled), plus a 4-7 GB re-pull of every idle base image within minutes. The routine tick now retires only what this host actually accretes — per-SHA app tags older than 2h (their creation time IS the local build time) — then sweeps dangling layers, which cannot touch a tagged image. The blanket -a prune survives only in the near-ENOSPC burst guard, where one re-pull beats every concurrent job dying. docker-reclaim.{sh,service,timer} are the hourly leak reclaimer that so far lived hand-installed on home-runner-1 only; home-runner-2 went without it and re-accumulated 176 leaked volumes (~60 GB) until jobs died of ENOSPC on 2026-08-06/07. Checked in so both hosts install the same files from here.	2026-08-07 10:10:59 +02:00
enricobuehler	dee97e893c	fix(vkdecode): the address the driver keeps is now the address we keep ... The AV1 use-after-free fix (cdd1f3ef) stabilised the wrong half. NVIDIA was measured retaining pColorConfig, so StoredParamsAv1 boxed the colour and timing blocks — but OwnedStdAv1SequenceHeader kept the Std struct ITSELF inline, so the pStdSequenceHeader we handed vkCreateVideoSessionParametersKHR was a stack address inside ensure_parameters, dead the moment it returned. The fix worked because of WHICH pointer that driver happened to hold. A driver retaining the outer one instead — no more of a spec violation than retaining pColorConfig was — reproduces the original bug exactly: plausible pictures, wrong content, no error and no counter moved. The same shape was in the shipping codecs, one step further from evidence: the H.264 and H.265 create paths pointed pStdSPSs/pStdPPSs/pStdVPSs at function-local Vecs, and both Add paths handed over the wrapper's inline std field and then moved the wrapper. Those are spec-legal — the object stores copies — and have never misbehaved on the fleet. They are fixed anyway, because that is precisely what was true of H.264/H.265 before the same class of bug was found in them, and a correctness argument that reduces to which vendor we tested is not one. So: the Std struct is boxed inside each owning wrapper (one level out from what _color_backing already did), and the contiguous create-time arrays are now fields of the stored parameters, assembled at their final address. Identical bytes at identical offsets — only where they live changed. The line drawn deliberately, in prose at session.rs:29: Std DATA is pinned; the VkVideoSessionParametersCreateInfoKHR chain itself is not. Retention there would be a different and far more extreme class of driver bug, and pinning it needs a self-referential struct over lifetime-parameterised builders. ⚠ NOT hardware-verified. No GPU has run this — the fleet is unreachable and the 250/250 parity that proved this code bit-exact cannot be re-run. That is why the change is constrained to address stability alone, and why it ships five CPU-only tests instead: three capture the pointer handed to Vulkan, perform the real move, and assert it survives — each verified FAILING first, with genuinely differing addresses, not a tautology. Two more pin the create-array ownership; those fail before the fix as compile errors rather than assertions, because the pre-fix bug there is a dangling pointer and asserting on it is UB. Also: caps.rs claimed the borrow checker pins a profile chain between wire() and its last use. False at exactly one site — decoder.rs took a raw *const, ending the borrow, leaving nothing but inspection to stop a future editor moving the chain before create_query_pool. Correct today, guarded by prose, which is how the first bug shipped. It is now compiler-enforced: the pointer write and the create call live inside one helper that takes the profile by reference, so the borrow is held across both by the signature. An audit cleared the chains otherwise — no entry point we pass one to retains it. Gates: fmt clean; clippy -D warnings over pf-vkdecode AND pf-client-core in the Linux container (its only real consumer, which cannot build on macOS at all — wol.rs uses deps its manifest gates to linux/windows, so workspace clippy has never passed there and does not now); 187 lib tests green on Linux, up from 182.	2026-08-07 09:57:39 +02:00
enricobuehler	93b8528d09	Merge pull request 'fix(encode): NVENC split-frame encode never engaged for HDR — engage it, measured' (#83) from worktree-nvenc-s1-split-reconfigure into main ... Reviewed-on: #83	2026-08-07 07:57:29 +00:00
enricobuehler	b5205fef52	Merge pull request 'fix(client/apple): audio stops crackling on lossy, bunching Wi-Fi' (#82) from worktree-audio-wifi-distortion into main ... Reviewed-on: #82	2026-08-07 07:37:19 +00:00
enricobuehler	515a3c2912	feat(pf-encode): wire split arbitration on Windows too ... The last coverage gap, and only worth building once S1 proved it possible: the Windows backend drives NV_ENC_DEVICE_TYPE_DIRECTX, and an in-place splitEncodeMode change had never been tested there. It works (071358cb), so the arbiter is now ungated from Linux-only to the union of both direct-SDK backends and wired into windows/nvenc.rs: the submit stamp, the feed hook on AU completion, apply_split_mode, split_key, arm_split_arbiter, and set_send_spread_us. Same gates as Linux, and they are correctness conditions rather than preferences: opt-in while it earns trust, an operator PUNKTFUNK_SPLIT_ENCODE pin always wins, a cached verdict short-circuits, >=2 engines, never H.264, and the sub-frame trade is only entered when the host has actually reported a send spread to price it with. The one Windows-specific difference is that `async_rt` is a real possibility here (opt-in two-thread retrieve) and the arbiter refuses it, because under pipelined retrieve the submit->AU span includes queue depth and the comparison would be noise. ⚠ Two more instances of the same item-level dead_code trap, caught by the Windows run and not by reasoning -- that is now 4 and 5: - `clear_split_verdicts` is called only by the Linux on-hw test, so it is dead on Windows; gated to `all(test, target_os = "linux")`. - The arbiter methods first landed inside `impl Encoder` rather than the inherent impl (the anchor I used, supports_chunked_poll, is a trait method), which the compiler caught as "not a member of trait Encoder". Verified .158 (RTX 4090 / Ada, driver 610.88, D3D11): clippy --features nvenc --all-targets -D warnings clean, and 2 on-hardware NVENC tests green including S1 re-run with the arbitration code in place (engines=2 latched, DISABLE->TWO_FORCED accepted, zero IDRs, reverse accepted). Verified .21: clippy clean with AND without the nvenc feature, 65 unit tests, 25/25 NVENC on-hardware. fmt clean.	2026-08-07 09:28:34 +02:00
enricobuehler	8c994965d4	docs(licensing): say what the licence gate cannot see ... The plan's M10 checklist named "the about.toml carve-out that puts FFmpeg outside the automated licence gate". There is no such stanza — I looked, on this branch and on origin/main. The carve-out is structural, which is worse: cargo-about walks the CARGO graph, so a native library reached through a permissively-licensed -sys crate is invisible to it. ffmpeg-sys-next is WTFPL and passes the gate cleanly while the LGPL libavcodec it link-imports is never harvested at all. So about.toml's own claim to be "exactly the regression guard we want against a copyleft dependency silently entering the linked set" was overstated: it did not catch FFmpeg entering and would not catch the next one. The comment now says so, and says where the LGPL obligations are actually discharged instead. The one genuinely good piece of news is recorded too: since M10 the client links no FFmpeg, so for every client artifact the crate graph and the linked set coincide and the gate finally means what it appears to mean. The gap is the host's alone. Gate: cargo about generate about.hbs --fail — passes.	2026-08-07 09:27:30 +02:00
enricobuehler	b27135308f	fix(scripts): the xcframework never absorbs a Homebrew libopus ... On a Mac with brew's opus installed, audiopus_sys found it via pkg-config and statically linked it into the aarch64 slice — a lib built for the RUNNING macOS (minos 26.0, tripping the script's own version guard) and existing only for the host arch, so the x86_64 slice silently fell back to the vendored build and the two slices shipped different libopus builds. Force the vendored CMake build for every slice (OPUS_NO_PKG_CONFIG=1), with the CMake policy floor modern CMake (>=4) needs to accept libopus's old cmake_minimum_required.	2026-08-07 09:23:37 +02:00
enricobuehler	64c92da356	fix(client/apple): the jitter ring deepens on the sessions that actually starve ... The shared JitterPolicy grew an adaptive target floor — clustered genuine underruns raise the live target a step at a time up to max_target_ms, a long quiet spell relaxes it back — and the three Rust rings all run it via note_read. The Apple ring is the one hand-written mirror, and it mirrored the shed half but not the growth half: its target was pinned at the 20 ms base forever. On Wi-Fi that bunches arrivals (power-save is the classic; the field MacBook report is the symptom), 20 ms is regularly shorter than one delivery stall, so the ring re-primed through every stall for the whole session — crackle that never got better, on exactly the client where a Moonlight with a deeper buffer sounds fine on the same host and network. The ring now carries the full mirror of note_read: 3 underruns inside a 5 s window grow the target 10 ms (capped at COREAUDIO's 70), 30 s of quiet gives a step back, and the write-side hard trim follows the grown target (including the Rust policy's target+quantum guard, which the mirror also lacked). New tests pin the mirror to the Rust suite's expectations — growth, relax, the cap — plus the field scenario end to end: bunched 60 ms deliveries with every fourth burst 30 ms late converge to a silence-free tail instead of crackling forever.	2026-08-07 09:23:29 +02:00
enricobuehler	81d257c7fa	fix(client/audio): the in-core decoder conceals lost packets like every other client ... A field report: game audio on a MacBook (M1) crackles over Wi-Fi against a host that plays clean to other clients. The Apple client is the one client whose Opus decode lives in core (punktfunk_connection_next_audio_pcm — AudioToolbox has no multistream path), and that decoder only ever decoded packets that ARRIVED. The Linux, Windows and Android decode loops all feed an AudioGapTracker and synthesize libopus packet-loss concealment for every packet the wire lost; the in-core path had the tracker sitting unused in the same crate. So on Apple every lost 5 ms datagram — at ~200 packets/s over Wi-Fi, a steady trickle — landed in the playout ring as a hard time-domain gap: a click per loss, sustained crackle under real loss. The redundant-plane recovery (0xD2) hides single losses when the host grants it, which is exactly why the survivors are the burstier gaps that need concealing most. The decode now runs through the same accounting as everyone else: concealed frames land in front of the arriving frame in one contiguous buffer (the embedder just writes it to its ring), a DTX marker advances the accounting without being decoded, and the output buffer is pre-sized for a full concealment run so the borrow-until-next-call pointer can never dangle. Unit-tested against real libopus: gaps, duplicates, DTX-after-loss, and the 50 ms cap.	2026-08-07 09:23:15 +02:00
enricobuehler	071358cbf7	test(pf-encode): S1 on WINDOWS/D3D11 — passes; Windows arbitration is buildable ... Everything the split-encode programme rests on had been proven only on Linux/CUDA. The Windows backend drives NV_ENC_DEVICE_TYPE_DIRECTX, so none of it transferred by assumption -- and if the driver refused an in-place split change there, Windows arbitration would simply not be buildable. RESULT on the RTX Windows box (RTX 4090 / AD102, driver 610.88, D3D11): engines=2, latched by query_caps (WP1.1's probe, validated on Windows hardware rather than inferred from Linux) DISABLE -> TWO_FORCED via nvEncReconfigureEncoder, resetEncoder=0: ACCEPTED, ZERO IDRs, and the reverse likewise. So the foundation now holds across three platform x arch x driver combinations: Linux/CUDA Blackwell 610.57.04, Linux/CUDA Ada 610.43.03, Windows/D3D11 Ada 610.88. ⭐ UNBLOCKS ALL FUTURE WINDOWS ON-HARDWARE TESTING. pf-encode's nvenc test binaries were believed unlinkable on Windows ("NvEncodeAPICreateInstance unresolved", recorded as pre-existing and worked around by only ever running clippy there). They link fine given the SDK import library: RUSTFLAGS='-L native=C:\Users\Public\nvenc -l nvencodeapi' `-L` alone is not enough -- without a `-l` nothing pulls the archive in, which is why the earlier attempt still failed. ⚠ This is TEST-BINARY-LOCAL and must stay that way: production deliberately dlopens NVENC rather than link-loading it, and an unconditional link-load is the known crash class on non-NVIDIA Windows hosts. ⚠ Box note: the RTX Windows box answers on .158, not the .173 in its memory entry, and `Administrator@` there resets the connection right after SSH2_MSG_SERVICE_ACCEPT in a way that reads like the host being down -- the working login is "Enrico Bühler"@192.168.1.158.	2026-08-07 09:23:05 +02:00
enricobuehler	5a1ec6198e	docs(ci): the Windows host's FFmpeg tree is no longer shared with the client ... windows-host.yml called FFMPEG_DIR "the same BtbN lgpl-shared x64 tree the Windows CLIENT links against". Since M10 the client links no libav* at all and windows.yml sets no FFMPEG_DIR, so the sentence pointed a reader at a link that does not exist. The provisioning script still fetches the tree — for the host alone — which is the part worth saying out loud, because the next person to read it will wonder why a client-provisioning step still mentions FFmpeg.	2026-08-07 09:16:32 +02:00
enricobuehler	0430d907bb	fix(pf-encode): gate forced_split_width to Linux — WP4 broke the Windows build ... The verification gap flagged in 01294e3a was real. `.133` came back up and the WP4 commit failed Windows clippy: `forced_split_width` is used only by the libav NVENC path (`enc/linux/mod.rs`), but it was added to `codec.rs`, which compiles everywhere -- so it is dead code on Windows and `-D warnings` rejects it. Third time this crate has hit the same item-level dead_code trap (see `subframe_env_forced`, and the arbiter items in `nvenc_core`), and the third time it was caught by actually running the Windows check rather than by reasoning about it. The comment on the gate says so, since the pattern is clearly not self-evident from the code. Verified .21: clippy -D warnings clean both WITH and WITHOUT the nvenc feature, 65 unit tests. Verified .133: Windows clippy --features nvenc --all-targets -D warnings clean, zero errors, zero dead_code. fmt clean.	2026-08-07 09:01:05 +02:00
enricobuehler	5c05246098	feat: M10 — FFmpeg is gone from the client ... cargo tree -p punktfunk-client-session finds no ffmpeg. The host still does, which is the whole point: pf-encode keeps libavcodec unconditionally and no host workflow, packaging script or licence file was touched. Deleted: crates/pf-ffvk, video_vulkan.rs, video_vaapi.rs, video_libav.rs, the libavcodec half of video_d3d11.rs, the av_log machinery, ffmpeg::codec::Id as the decoder's vocabulary (the quic CODEC_* wire constants now serve, which is why the evidence table was keyed on them), DecodedImage::VkFrame and ::Dmabuf, the presenter's AVVkFrame lane, and the ffmpeg-fallback feature with everything behind it. DrmFrameGuard collapses from an enum to a newtype, which removes an unsafe impl Send. Roughly 25,000 lines. Then the CI, packaging, licensing and docs work the plan's §6 lists: the Windows workflows lose FFMPEG_DIR, PF_FFVK_VULKAN_INCLUDE and their PATH prepend; the MSIX loses its DLL wildcard; the client .deb stops emitting libav sonames on its own because depends come from dpkg-shlibdeps; arch, flatpak and nix drop the dependency; and the README's "FFmpeg 7 or 8" contract narrows to the host. Three defects reached users' machines in the first cut, and none was in the deletion itself. All three desktop Settings UIs offer vulkan, vaapi and d3d11va as stored decoder values, so those strings sit in shipped settings files today. Refusing them by name — which is the correct rule for a stale pin — would have bricked every upgraded client whose owner ever touched that dropdown. They now migrate onto the native rung for the same hardware family, at decoder construction AND at each dialog's lookup, because a legacy value that matches no preset displays as "Automatic" and silently rewrites the user's preference on the next save. M9's evidence filter was deleted on the argument that with no libavcodec twin below, barring an unproven rung removes hardware decode rather than moving down one rung. That is true on Windows and false on Linux for Intel and every unknown vendor id, where prefer_vulkan_first is false and the order is native-vaapi → native-vk: a rung that has decoded nothing anywhere sitting above one that is 250/250 on three drivers. Every Intel Linux desktop would have moved from libavcodec VAAPI, shipping for years, onto pf-vaadec by default — and a rung that constructs and then produces wrong pixels leaves only by the error-streak demotion, which this codebase already documents as not tripping on the B580's strobing. The filter is restored as a narrow, pure, testable rule: an unproven rung yields to a proven one, and to nothing else. Windows deliberately passes no rung below, because that vendor family is the one with a measured wrong-pixel report against Vulkan decode, and trading no evidence for evidence of corruption is the wrong direction. And the notices still said FFmpeg was bundled. The root file is what both desktop clients include_str! and what the MSIX ships, three lines under the new card saying no FFmpeg is bundled; Apple's Acknowledgements said it too, on iOS, tvOS and macOS. The generator now emits four per-client files scoped by transitive closure — 0 FFmpeg mentions in each, verified — while the root file keeps it for the host. That also ends the standing false attribution of ffmpeg-next, GTK4, windows-rs and the NVENC SDK to an iPhone. Windows has no reachable box, so it was compiled instead: a cross clippy at -D warnings on x86_64 and aarch64-pc-windows-msvc with the C toolchain stubbed so build scripts run without linking. That gate immediately caught an include_str! path one directory too deep, which nothing else could have. Gates: container clippy -D warnings, 160 tests, workspace check, both Windows targets clean, client ffmpeg count 0 and host 2. The four decode crates are untouched, so the hardware rungs' 250/250 stands. ⚠ Owed and unrun: no GPU has executed any of this milestone. M8's on-glass software check, M7's D3D11 and VAAPI AV1 hardware legs, and M9's field bake all still want hardware, and the bake window and criteria remain the user's.	2026-08-07 08:58:47 +02:00
enricobuehler	01294e3a53	refactor(pf-encode): WP4 — one split policy, shared with the libav path ... The libav NVENC path carried its own inline copy of the split decision and had already drifted from the direct-SDK selector: it hard-coded a 2-way split regardless of engine count, and had no depth rule at all. That is the drift the shared resolver was extracted to prevent, and the copy quietly reintroduced it. Routing it through `resolve_split_mode` needed the policy to MOVE. `nvenc_core` is gated on `feature = "nvenc"`, but the libav path is precisely the build where that feature is OFF (`PUNKTFUNK_NVENC_DIRECT=0`, and the featureless packages -- the packaging gap this project has been bitten by before). So resolve_split_mode / max_forced_split_mode / clamp_to_engines, plus a new `forced_split_width`, now live in `codec.rs`, which is always compiled and already owned SPLIT_FORCE_PIXEL_RATE. That means the NV_ENC_SPLIT_ENCODE_MODE values had to be hand-written as plain constants, since the SDK enum does not exist without the feature. They are therefore pinned: `nvenc_split_constants_match_the_sdk` (feature-gated, the only place both are visible at once) asserts all five against the real enum, so the copies cannot rot. ⚠ Only the FORCED outcomes are actionable on the libav side -- libavcodec's `split_encode_mode` AVOption is its own vocabulary and our DISABLE is the NVENC enum's 15, which would be meaningless there. DISABLE/AUTO both map to "leave the option unset", which is exactly today's behaviour (unset = the driver's auto). `engines = 0` ("not probed") maps to 2-way, preserving what that site always did; a 3-NVENC part gets the wider split only on the direct-SDK path, which is the one that actually probes. ⚠⚠ VERIFICATION GAP: .133 went down mid-change (no ping), so the WINDOWS leg is UNVERIFIED. This matters more than usual -- the Windows backend imported resolve_split_mode from nvenc_core and that import had to move too, which a grep caught rather than a compiler. Re-run before trusting it: cargo clippy -p pf-encode --features nvenc --all-targets -- -D warnings Verified .21: clippy -D warnings clean BOTH with and without the nvenc feature (the featureless build is the whole point of the move) and with nvenc,vulkan-encode; 65 unit tests incl. the new constant-parity test; 25/25 NVENC on-hardware; punktfunk-host clippy clean. fmt clean.	2026-08-07 08:16:35 +02:00
enricobuehler	38554c1c6e	feat(client): M9's code half — native first, FFmpeg behind an off-by-default feature ... `ffmpeg-fallback` on pf-client-core, default off on the crate. With it off the libavcodec rungs are not compiled, pf-ffvk leaves the dependency graph, and no ladder or demotion arm names them; with it on each sits exactly where it sits today, directly below its native twin. That is the switch which makes M10 a deletion rather than a redesign. The bake window and the regression criteria are the user's, per the plan, and nothing here claims the M9 gate is met. The hard part was not the feature, it was honesty. Two of the four native rungs have never decoded a frame on any hardware — native VAAPI at all, and native D3D11VA's AV1 leg — and making those the default would assert evidence that does not exist. So admission is per rung and per codec: a pair with hardware evidence joins `auto` always; a pair without it joins only when nothing proven is left below it (a build with no FFmpeg twin, where the alternative is not a proven rung but the CPU) or when the user asks with PUNKTFUNK_NATIVE_FIRST=1. Pins bypass it, so a lab run can still reach any rung. The shipping default therefore changes in exactly three ways, all evidence-backed: AV1 `auto` takes native Vulkan (250/250 bit-identical on an RTX 5070 Ti), Windows H.264/H.265 `auto` takes native D3D11VA above its FFmpeg twin (parity on two GPUs plus a 30-minute soak), and a failing Vulkan rung on Windows demotes to native D3D11VA first. Everything unproven is byte-for-byte as it was. The evidence state is written where it cannot rot: a table in video.rs's module docs, the same facts in code as `native_evidence()`, a test asserting them in both feature states, and a per-session log line carrying the rung, the codec, whether hardware has verified that pair and the evidence string — at WARN when it has not. A support engineer reading a log can now tell proven from assumed without asking anyone. Termination needed a new guarantee. With the FFmpeg twins gone, two native rungs in opposite per-vendor orders could hand a session back and forth forever, so a rung once entered is never re-entered and the walk is monotone to software. The never-delivered fall-through still works: with the feature on it is unchanged, and with it off it is redundant, because the next candidate already IS the rung below. ⚠ ffmpeg-next remains a hard dependency of pf-client-core, deliberately. What is left off-feature is three type-level residues — the codec-id vocabulary, the AVVkFrame guard that is pf-presenter's public import, and a pixel-format in one signature — every one of them an M10 §6 line item. Deleting them here would mean deleting the presenter's FFmpeg lane, 55 call sites, in a milestone whose gates cannot run a GPU. No libavcodec decoder is opened in a default build. ⚠ video_d3d11.rs was gated item by item rather than wholesale, and nothing in this tree compiles it — it needs a Windows check before anyone trusts it. Gates: both feature states, container clippy -D warnings and 158/159 tests, workspace check. The four decode crates are untouched, so the hardware rungs' 250/250 stands.	2026-08-07 07:00:29 +02:00
enricobuehler	d5e23146c0	feat(client): M8 — the software rung is openh264 and rav1d, and swscale is gone ... The ladder's last rung no longer runs FFmpeg. H.264 decodes through openh264, AV1 through rav1d, and HEVC is refused outright: no permissively licensed software HEVC decoder exists, so an HEVC session that exhausts its hardware rungs now tears down and re-dials advertising HEVC-less caps, and the host picks H.264. The plan calls that a first-class path; it is one. swscale is deleted, and with it the BT.601 default that its correction code existed to undo. Colour on the H.264 lane now comes from the same pf-bitstream planner every hardware rung submits from — openh264 reports no VUI at all — and AV1's comes per-picture from the sequence header. One colour source, one CSC: the old default is unrepresentable rather than merely fixed. Frames reach the presenter as three tightly-packed planes through the planar CSC pass, which had to be un-gated from the pyrowave feature and its device probe, since the last rung must exist on devices that failed that probe. rav1d rather than the dav1d crate, deliberately and against the plan's literal wording: dav1d-sys is system-deps-only, so it would add a system library and a .pc file to every client package — in the milestone family whose excision checklist exists to delete exactly that. rav1d is the same decoder, same licence, statically linked. The cost is honest: no-asm builds on both decoders, and software throughput is still unmeasured. The colour test is the milestone's exit criterion, so it is built to fail. Three fixtures, and a mutation check: hardcoding the swscale default turns the red bar to [255,24,0], and swapping Cb/Cr turns red to blue — a silent error no metadata assertion could catch. Review then disproved the range half of it numerically: with eight saturated bars, decoding the full-range fixture with the wrong range gives max error ZERO, because a mismatch only pushes values outside [0,1] where the shader clamps. A mid-tone was added; the wrong range now costs 11, well past the tolerance. The exit criterion I set was satisfiable by a test that proved nothing. Two blocking defects, both emergent rather than local. Software AV1 on a 10-bit stream never reached its typed refusal: rav1d is built 8-bit-only and returns ENOPROTOOPT, which the send loop turned into a generic error, so the pump's typed downcast missed and every AU failed identically — a permanent freeze on precisely the shipping case, since AV1 is advertised only where hardware AV1 exists and hardware AV1 plus HDR is Main 10. The shape is now read from the sequence header before any byte reaches the decoder, exactly as the H.264 leg reads the active SPS. And the new Reconnecting phase was the first state that is not streaming, not connecting, and still holding a live stream — which opened all three guards that had made a second launch impossible. Pressing A assigned over `stream` where every other site shuts down first, and StreamState has no Drop, so the old pump was detached: a second live session still submitting to a Vulkan device that gets destroyed underneath it. Nothing about the reconnect was wrong in isolation; the defect lived between a new state and three guards nobody re-examined. Start is now defensive and the retry raises the connecting modal, so the UI matches the state and B can cancel. Also closed: retry_caps was computed, tested and never applied, so a shape refusal could end a session reporting no codec available while a working retry existed; the retry inherited force_software sticky-true, landing an HEVC→H.264 fallback on software H.264 with working hardware H.264; it re-dialled with a stale mode; the CPU present arm had no survivable-failure handling where the pyrowave arm — same pass — has it; HEVC is no longer advertised when the decoder is pinned to software; and the software rung now feeds the recovery-point SEI it already had in hand to the re-anchor gate. ⚠ Two host-side gaps found while tracing, neither in scope here: Hello::launch is NOT idempotent (gog:/custom: targets spawn a second copy on a retry; the field is kept verbatim because dropping it orphans the gamescope display whose reuse key includes the command), and a reconnected session can never adopt a game predating its own launch stamp, so it has no game-exit detection. ⚠ OWED: the on-glass software run. ~200 lines of new Vulkan on a path that only runs because the GPU already failed, and no driver has seen it. The review's minimum check is sync validation enabled, a non-multiple-of-16 mode, a mid-session resize and demotion, and both colour matrices. Gates: container clippy -D warnings over four crates, 236 tests, workspace check. pf-vkdecode and pf-bitstream are byte-for-byte untouched, so the hardware rungs' 250/250 stands.	2026-08-07 06:18:23 +02:00
enricobuehler	a20cd44ed4	feat(client): native VAAPI AV1 — the third rung, and two failure-path defects ... The libva AV1 layouts, the AuPlan conversion and the Linux rung's AV1 arm, completing AV1 across all three hardware backends. Pin-only. Layouts measured, not transcribed: the committed probe grew the AV1 structures and every size and offset it printed against libva 2.23.0 is a compile-time assertion. Three that a hand-count gets wrong — the picture buffer is align 8 because anchor_frames_list is a pointer, inserting seven bytes of padding; seg_info and film_grain_info carry their own padding tails inside the parent; and THREE of AV1's six bit-field unions are narrower than a word (one uint8_t, two uint16_t), so a u32 packer over any of them writes through its neighbour. This is the fifth way this program has had to spell "which pictures does this frame use", and it is unlike the other four: ref_frame_map is indexed by SLOT and holds actual VASurfaceIDs rather than indices into anything, ref_frame_idx is indexed by NAME and holds slots taken from the header — not from the plan's refs, where a lost reference leaves a hole and a hole is not a slot — global motion is picture-level, and there is no per-reference size field at all. Established from va_dec_av1.h and libavcodec's vaapi_av1.c, and stated in the module docs so the next reader does not re-derive it. Review verified the whole happy path — every layout assertion re-measured, every packer width and bit position, the reference convention, the num_elements buffer shape — and found both defects on FAILURE paths, neither reachable on the vendored vector. A conversion refusal permanently desynced the ledger. The mutation block sat after the tile walk, so any tile-shape refusal left the planner holding a picture with no ledger slot — and the resulting UnresolvedReference fires before that block too, so it never repaired. Every later access unit hard-errored until a shown key frame: one lost packet costing a GOP. The arm's own doc already warned that skipping conversion would desynchronise the slot map; the refusal door did exactly what the skip door was written to avoid. The block is hoisted, and a tile-shape refusal on an already-damaged plan is now concealed rather than refused. Fixing that exposed a sharper edge: the conversion can release a slot and reassign it to the refused picture in one call, so the binding would still hold the PREVIOUS picture's surface — a wrong reference rather than a missing one, which nothing downstream could notice. The caller now clears the binding unconditionally on the refusal path. And a damaged frame's surface was never written yet was bound as a reference and left in pending, so a later clean show_existing_frame would claim it with damaged = false and ship uninitialised GPU memory to the presenter — on several drivers another client's framebuffer. The justification quoted half of va_dec_av1.h; its next sentence gives the remedy, which is to point the problematic index at an alternative buffer. Damaged frames now submit as they do on the other two arms, with live surfaces substituted for invalid entries and reported as a bitmask — preferring a reference that really decoded over the decode target, and keeping libavcodec's deliberate all-invalid map on a shown key frame. Film grain is refused rather than decoded wrong: libva wants two surfaces, one ungrained for prediction and one grained for output, and libavcodec allocates a second frame for exactly that. The gate now sits after the mutation block so a grained frame costs itself rather than the GOP, and stays per-AU rather than per-sequence because a stream that merely DECLARES the tool decodes here perfectly. ⚠ Residual, flagged not fixed: a picture decoded from substituted references can still be shown by a later show_existing_frame. It is decoded memory now rather than uninitialised, and it is what the H.264/H.265 arms do, but tracking "this was concealed" through to display needs new session state. Gates: macOS fmt/clippy/125 tests/cargo-doc, container clippy -D warnings over seven crates and 548 tests, workspace check. pf-bitstream's diff is comment-only — verified — so the Vulkan rung's 250/250 stands untouched. Nothing here has decoded a frame: no VAAPI hardware is reachable.	2026-08-07 04:22:23 +02:00
enricobuehler	ef40890c80	feat(client): native D3D11VA AV1 — wired, and four defects it exposed ... The AV1 arm of the native D3D11VA rung, parity-required because today's FFmpeg d3d11va rung already decodes AV1 Profile 0 and the excision must not silently drop it. Pin-only, as that rung is today. decode() walks the temporal unit frame by frame; submit() splits into decode_into and present, because AV1 decodes frames that are never shown. The proven H.264/H.265 body is byte-for-byte unchanged — review diffed it against HEAD mechanically and found only a rename plus one refusal arm — and the VideoProcessorBlt hand-off is untouched. That mattered more than anything else here: those two codecs are hardware-proven, .173 is powered off, and no gate that runs could have caught a regression in them. Every descriptor value comes from libavcodec's dxva2_av1.c read verbatim, not from symmetry with the other codecs: three buffers and no qmatrix (AV1 transmits none), NumMBsInBuffer zero on all three, ConfigBitstreamRaw 1, surface alignment 128, pool +8, and the session sized from the SEQUENCE header's max frame size — sizing from the frame would rebuild the decoder and drop every reference the first time a stream legally resized downward. Two places where following the H.264/HEVC pattern would have been wrong. libav pads the bitstream buffer and grows only its descriptor's DataSize, never a tile's, because a tile's size is exact — charging padding to the last record is corruption, not filler. And the committed tile records were one per tile GROUP spanning the whole OBU, header and frame header included, where libav emits one per TILE addressing the payload past its tile_size_minus_1; the vendored vector is single-tile, so the old tests passed either way. Review then found four more defects in the already-committed conversion, each confirmed against libavcodec AND Chromium's D3D11 AV1 accelerator: Tile widths and heights were the coded minus-1 where the field is a superblock COUNT — every tile declared one superblock short, on every frame, with a comment asserting the opposite of the truth. StatusReportFeedbackNumber must be zero for AV1. Both reference implementations disable it specifically for this codec — libav's note reads "breaks decoding on some drivers (tested on NVIDIA 457.09)", Chromium's "it crashes :|" — while both set it for H.264 and HEVC, which is why this rung's proven codecs never showed it. It would likely have presented as a hang or a rejected submission rather than bad pixels, sending the next session after the tile records instead. frame_refs[].Index is an index INTO RefFrameMapTextureIndex, not a surface index; the neighbouring line already filled that map correctly. Measured: 1636 reference entries on the vendored vector where the two differ. qm_y/u/v need the 0xFF "no matrix" sentinel — 0 is a valid matrix index, and 274 of 274 frames transmit no quantiser matrix, so every one was being dequantized against matrix 0. Also closed: the slot leak the Vulkan rung had already found and documented (a frame refreshing no slot is never reported removed, so nine of them exhaust the ledger); a tile-grid check that could not fire, replaced with libav's own cols*rows guard; per-reference sizes now taken from the reference's own header via RefState rather than the current frame's; and the render size clamped against the decoded picture in both rungs, since AV1 permits a render size larger than the frame. The parity leg was rewired through the real decode path — it previously called the internals directly, so its hidden-frame assertion described the harness's own counter rather than production withholding anything. Gates: macOS fmt/clippy/383 tests, container clippy -D warnings over four crates and 499 tests, and on Windows .133 (.173 is powered off) clean checks plus 97 pf-dxvadec tests. All 8 Vulkan gpu_parity legs re-verified bit-exact on the RTX 5070 Ti after the shared-code change. No AV1 frame has been decoded through this rung anywhere: it needs .173 back.	2026-08-07 03:01:49 +02:00
enricobuehler	185332a866	fix(vkdecode): H.264 and H.265 session parameters own what the driver keeps ... The same use-after-free the AV1 rung was just fixed for, closed in the two rungs that ship. session.rs and session_h265.rs handed their Std parameter sets to vkCreateVideoSessionParametersKHR and dropped the backings when the call returned; NVIDIA 610.57.04 was measured retaining such a pointer to decode-record time, which is what made AV1 diverge on 250 of 250 frames. Nothing was known to be broken here — both rungs are bit-exact on four drivers — but that was luck rather than correctness: the freed blocks happen to still hold the right bytes in that window. The native Vulkan rung sits in the auto ladder above FFmpeg-Vulkan on shipping clients, so this was live code, and its failure mode is silent wrong pixels rather than a crash. StoredParams and StoredParamsH265 hold the parameters object together with every wrapper it points at, so an object whose backing is gone cannot be built. create_parameters_object takes the wrappers by value; the Add arm adopts them only after a successful update, so a failed update drops what it never stored; the Recreate arm replaces, destroys the old object, then drops its backings, written explicitly so the ordering survives later edits. The Add-vs-Recreate decision table and the VPS ledger are untouched — only ownership moved. params.rs still carried the refuted claim as a type-level contract, that Vulkan "copies all parameter data before returning" and keeping the wrapper alive across the call "is the whole obligation". Corrected to the measured truth. The tests are what stop this returning, and each was verified by sabotage: inlining the H.264 PPS box fails at pps pScalingLists, inlining the H.265 SPS DPB box fails at sps pDecPicBufMgr, and making either adopt drop instead of store fails both session tests. Two lessons are recorded in them. Pointer equality cannot be the assertion, because the Std struct carries pointers by value and a stale one compares equal — the read-back is the discriminator, so the tests clobber the dead stack first to make a dangling read deterministic rather than lucky. And the first H.265 draft read six of eight pointers and let the sabotage through, so it now reads every one with a labelled assert. ⚠ One site of this class remains, deliberately: the VkVideoProfileInfoKHR chains, where wire()'s borrow dies with its enclosing block while the object created from it lives on — three session creates, an image, a buffer, and a query pool built from a raw pointer into a stack chain. It spans six modules and all three codecs, and a profile is enums a driver resolves at create time with no per-frame deref, so the risk is materially lower. It wants its own pass with its own hardware verification. Gates: macOS fmt/clippy/196 tests, container clippy -D warnings, pf-vkdecode 182/182 and pf-client-core 140/140. On the RTX 5070 Ti, all 8 gpu_parity legs re-verified green after the change — H.264, H.265, Main 10 and AV1 all still bit-identical to libavcodec.	2026-08-07 01:04:17 +02:00
enricobuehler	cdd1f3efce	fix(vkdecode): AV1 is bit-exact — the bug was a use-after-free, not the driver ... 250/250 frames bit-identical to libavcodec on NVIDIA 610.57.04, and all four other parity legs (H.264, H.265, Main 10, both four-byte-prefix twins) still green. session_av1 built the sequence header, handed pStdSequenceHeader to vkCreateVideoSessionParametersKHR, and dropped the backing the instant the call returned — on the documented assumption that Vulkan copies parameter data before returning. NVIDIA does not. It keeps the pointer and dereferences pColorConfig when a decode is RECORDED. The freed block became our own next allocation, whose bytes read back as mono_chrome = 1, and a monochrome frame skips exactly loop_filter_level[2..3] (AV1 7.14). That is the whole fingerprint two earlier rounds chased: luma bit-exact, chroma off by small amounts, and rewriting the chroma levels in the bitstream changing nothing — the driver read them correctly and then discarded them, because it believed the stream had no chroma. StoredParamsAv1 now holds the parameters object and its Std backing in one value, so an object whose backing is gone is unrepresentable. The road there is worth recording, because two well-evidenced conclusions were wrong before this one was right. A software oracle reproduced the divergence exactly by disabling chroma deblocking, and a GPU probe showed chroma levels [8,12] and [63,63] producing byte-identical output — which looked conclusive and was not. libavcodec's own Vulkan AV1 hwaccel is bit-exact on this same driver, which proved the hardware fine and the defect ours. ffmpeg never hits it: with VK_KHR_video_maintenance2 it uses inline session parameters and never creates a parameters object at all. The proof is direct rather than inferred: a throwaway Vulkan capture layer dumped both submissions and every byte of our AV1 picture info already matched libavcodec's, including the loop filter block; only the session parameters layer differed. Watching the block's address showed correct bytes at create and our next allocation at decode. Ruled out on hardware, so nobody re-tests them: filmGrainSupport, maxCodedExtent, maxDpbSlots/maxActiveReferences, VkVideoDecodeUsageInfoKHR, the tile-start sentinel, the setup slot's SavedOrderHints, a NULL pTimingInfo, and heap luck. Two earlier fixes are confirmed against libavcodec's captured wire bytes and kept: CDEF secondary strengths carry the coded value rather than the spec's in-place fixup, and LoopRestorationSize is log2-based. The refuted driver-ignores-chroma-levels claim is corrected everywhere it was written down, and that probe test now passes and points at the lifetime of everything a submission points at before blaming a vendor. ⚠ Adjacent and NOT fixed: session.rs and session_h265.rs drop their Std backings the same way, and those sets carry embedded pointers too. Both are measured bit-exact on four drivers, so nothing is known to be wrong — but the contract now rests on a driver behaviour measured FALSE for AV1 on a shipping driver. The SAFETY comments asserting it have been corrected; the structure is deliberately untouched pending its own pass. Gates: macOS fmt/clippy/336 tests, container clippy -D warnings, all green; 8/8 gpu_parity and 3/3 gpu_smoke legs verified on the RTX 5070 Ti.	2026-08-07 00:39:34 +02:00
enricobuehler	1062aa780f	test(pf-encode): measure the bits/frame curve — no crossover, split always wins ... WP0's real deliverable, and the hole every previous measurement in this programme had. All prior timings ran against driver-zeroed buffers, so rate control had nothing to code (~300 B/AU against an 833 KB quota) and only the PIXEL-proportional half of the encode cost was ever exercised -- while the 4K60 HDR field report was a BITS/FRAME problem at 6.8 Mbit/frame. Adds `pf_zerocopy::cuda::write_plane_from_host`, the exact mirror of the existing read_plane_to_host. No new loader entry was needed: cuMemcpy2DAsync_v2 was already in the table and CUDA_MEMCPY2D just needed the reverse memory types. Linux-only by construction (pf-zerocopy's `imp` is cfg'd to linux). ⚠ Two harness mistakes found and fixed by looking at bytes/AU rather than trusting the knob: - Pure per-pixel noise is INCOMPRESSIBLE, so a low bitrate target does not produce low bits/frame -- it OVERSHOOTS. At a nominal 50 Mbps the encoder emitted 719 KB/AU against a 104 KB quota, and the three lowest rows of the first sweep all sat at the same ~5.7 Mbit/frame. Sweeping nominal bitrate measures nothing. - So the sweep moves CONTENT DETAIL (block size) instead, and the x-axis is the bits/frame the encoder ACTUALLY produced, never the one requested. 4K60 HEVC 8-bit, real content, single-engine vs forced-2: bits/frame Ada 4090 Blackwell 5070 Ti 0.2-0.3 Mb 4567 -> 2381 1.92x 5549 -> 3552 1.56x ~1.1-1.2 Mb 5060 -> 2626 1.93x 5867 -> 4082 1.44x ~3.3 Mb 8478 -> 4455 1.90x 9286 -> 5862 1.58x ~9.6 Mb 16237 -> 8114 2.00x 16435 -> 9275 1.77x RESULTS. (1) Encode time scales strongly with bits/frame -- 4.6 ms to 16.2 ms across the range on Ada -- confirming the hypothesis' core claim. (2) There is NO CROSSOVER: split wins at every point on both architectures (Ada ~1.9-2.0x and notably flat, Blackwell 1.44-1.77x). So the arbitration's encode-side answer is essentially always "split", which makes the sub-frame handicap the only decision that actually matters -- exactly the part already built and unit-pinned. (3) It corroborates the field capture: at ~6.8 Mbit/frame these curves put single-engine 4K60 around 10-13 ms, and the field report was 10.3 ms on a 4090. That reads as real ASIC time, not the retrieve-queue inflation it might have been. ⚠ Caveat the data itself shows: cost is NOT monotonic in bits/frame alone. The 1px row lands at the HIGHEST bits/frame yet encodes FASTER than the 4px row on both boxes (Ada 10148 vs 16237 us) -- pure noise defeats motion estimation, which gives up early, where semi-structured content makes it search hard. Content structure is a real term, so "bits/frame" is a good axis but not a complete cost model. Verified .21: clippy -D warnings clean (pf-encode + pf-zerocopy), 64 unit tests, 25/25 NVENC on-hardware. Curves run on both Ada and Blackwell. fmt clean.	2026-08-07 00:30:09 +02:00
enricobuehler	50b3fd1012	fix(pf-encode): drop the 10-bit short circuit — measured wrong on Ada, twice ... WP1.3, and the measurement that justifies it. `resolve_split_mode`'s 10-bit rule sat ABOVE the pixel-rate arm and took no codec, so it (D1) vetoed 10-bit 4K120 -- the very case the pixel-rate arm exists for -- and (D2) applied an HEVC-Main10-on- Ada result to AV1 10-bit, which has no such measurement. Both fixed: the pixel-rate arm now comes first, and what remains is codec-scoped to HEVC and only applies BELOW that bar, where a second engine buys nothing anyway. The rule rested on one datapoint: 5120x1440@240 Main10 on Ada, forced-2 7.6 ms vs 2.8 ms single-engine -- split 2.7x SLOWER. Dropping the short circuit flips that exact configuration's behaviour, so it was re-measured on a 4090 (AD102, driver 610.43.03), 400 Mbps, sub-frame pinned off, via a new mode-parameterizable Main10 A/B test (PF_AB_MODE=WxHxFPS reproduces the original operating point). Ada 4090 single forced-2 ratio 3840x2160@60 4483 us 2178 us 2.06x split WINS 5120x1440@240 3689 us 2813 us 1.31x split WINS <- the veto's origin 3840x2160@120 4148 us 2189 us 1.89x split WINS Blackwell 5070 Ti 3840x2160@60 4216 us 2477 us 1.70x split WINS 5120x1440@240 4651 us 3894 us 1.19x split WINS Split wins for Main10 at every mode on BOTH architectures, including the config the veto came from. The original number does not reproduce. ⚠ Caveats, unchanged from the rest of this work: content is trivial (297-300 B/AU against an 833 KB CBR quota -- zeroed VRAM), so this is the pixel-proportional term and the bits/frame regime is still unmeasured; debug build; and the driver differs from whenever the original was taken. Also validated on Ada in the same session -- the whole spike set reproduces on a SECOND architecture and an OLDER driver (610.43.03 vs 610.57.04): S1a in-place split switch accepted with zero IDRs both directions; S1b takes effect (|C-B|=12 vs |C-A|=1921, the cleanest run yet); S1c pair flip passes; D5 confirmed (AUTO+sub-frame 4424 vs DISABLE 4409, 15 us apart -- and AUTO without sub-frame 2310 ~= TWO_FORCED 2314, so the arm stays); engines=2 with THREE_FORCED correctly clamped to mode 2; arbitration converged with exactly 1 keyframe. Verified: .21 clippy -D warnings clean + 64 unit tests; .133 Windows clippy -D warnings clean (the resolver signature grew a `codec` param, so both backends moved); Ada + Blackwell on-hardware as above. fmt clean.	2026-08-06 23:58:24 +02:00
enricobuehler	2366c4fe31	feat(pf-encode,host): price the HEVC sub-frame trade so arbitration can cover it ... The named next step after WP3's first increment. That increment deliberately REFUSED to arbitrate HEVC-with-sub-frame -- the fleet default, and the reported field case -- because engaging split there gives up sub-frame readback, whose whole value is that the send overlaps the encode. An encoder measuring only encode time would see split as ~2x faster, take it, and make end-to-end latency worse while reporting a win. This supplies the missing number. The real comparison is encode_1eng + send_of_last_slice against encode_2eng + send_of_whole_AU, so the challenger owes roughly spread x (slices-1)/slices. Split across the two sides that can each see half: - Host: new `Encoder::set_send_spread_us` (defaulted, forwarded by TrackedEncoder -- same trap class as set_wire_chunking, and unforwarded it would fail SILENTLY IN THE SAFE DIRECTION, which is the hardest kind to notice). The send thread is the only place a paced send is observed and the encode loop the only place the encoder can be touched, so it goes over an AtomicU32 like encoder_ceiling_kbps, EWMA-smoothed 3:1 per completed AU: one content spike must not flip a verdict that then gets cached. - Encoder: turns the raw spread into the handicap, because only it knows `slices`. SplitArbiter::with_handicap charges it to the challenger before the comparison. A unit test runs identical encode numbers with a cheap and an expensive send and asserts the verdict REVERSES -- with an expensive send the arm that looks twice as fast is a loss end to end, and the incumbent must hold. That is precisely the regression an encode-only arbiter ships. Gate now opens for HEVC+sub-frame only when a spread has actually been reported (and slices >= 2); with no hint it still refuses, so behaviour is unchanged until the host feeds it. Two mechanics this needed: - apply_split_mode became a PAIR flip (split + sub-frame), routed through resolve_split_subframe and restoring from `subframe_opened_with` so a session that never had sub-frame can never gain it. It also recomputes `subframe_chunks`, which reconfigure_bitrate does NOT -- spike S1c's finding; leave it stale and supports_chunked_poll keeps saying yes while numSlices never advances, so poll_chunk busy-polls its whole budget every AU. - The arbiter is now fed from BOTH completion points. A sub-frame session finishes through poll_chunk, so the incumbent arm of an HEVC experiment would otherwise never deliver a sample -- only the challenger, with sub-frame dropped, comes through poll. Verified .21: clippy -D warnings clean for pf-encode AND punktfunk-host with nvenc, 63 unit tests (1 new), 23/23 NVENC on-hardware green. Verified .133: Windows clippy -D warnings clean, zero dead_code. fmt clean.	2026-08-06 23:41:40 +02:00
enricobuehler	f34f311c69	Merge pull request 'fix(brand): capitalize "Punktfunk" in user-facing text; name the legal copyright holder' (#81) from worktree-docs-title-casing into main ... Reviewed-on: #81	2026-08-06 21:33:33 +00:00
enricobuehler	3b283dc26e	feat(pf-encode): WP3 — live split arbitration, measured on the session, no IDR ... The fix S1 unlocked. Rather than predict the right split mode at open — which cannot work, because the decision depends on bits/frame and an Automatic client's steady-state bitrate is unknown at open (ABR climbs in place afterwards) — the encoder now measures both arms on the live session and keeps the winner. S1 proved nvEncReconfigureEncoder takes a changed splitEncodeMode with resetEncoder=0, emits no IDR, and actually applies it, so the experiment is invisible on the wire. Deliberately measures instead of modelling: hard-coded per-arch constants are exactly how the rule this replaces went wrong (one 5120x1440@240 Ada datapoint generalised into a fleet-wide 10-bit veto). A measurement tracks driver updates for free. `SplitArbiter` (pure state machine, unit-tested without a GPU): measure incumbent -> switch -> SETTLE -> measure challenger -> keep the winner, else switch back. Verdicts cache per (gpu, codec, mode, depth, chroma) so later sessions open straight into the winning arm; the key is CeilingKey minus split_mode, since the split mode is the thing being decided. ⚠ SETTLE_FRAMES=16 is load-bearing, not padding: split-encode does not reach steady state on the first frame (a FRESH TWO_FORCED session measured early-half 3280us vs late-half 1996), so judging an arm right after switching reads the transient — intermittently, which would then be cached. A unit test feeds exactly that transient and asserts the arbiter still sees the steady state. Safety gates, all correctness conditions rather than preferences: opt-in (PUNKTFUNK_NVENC_SPLIT_ARBITRATE=1) while it earns trust; an operator PUNKTFUNK_SPLIT_ENCODE pin always wins; skip if a verdict is already cached; sync depth-1 only (async_rt.is_none(), same gate chunked poll uses — under pipelined retrieve the submit->AU span includes queue depth and the comparison is noise); needs >=2 engines; never H.264. ⚠ And the one that bounds this increment: NO SUB-FRAME TRADE. For HEVC, forcing split gives up sub-frame readback, which costs send/encode overlap the ENCODER CANNOT SEE — it measures encode time only, so it would reliably prefer split and silently make end-to-end latency worse. So arbitration runs only where nothing is traded: sub-frame already off, or AV1 (both features legal). Pricing that trade needs the host's send cost and is the next work package. Challenger choice tests the question worth asking — anything not already the widest forced split is challenged BY the widest ("are we leaving engines idle?"). The naive "challenge whatever we are not" spent the experiment re-proving that splitting beats not-splitting, while parking the session on the slow arm to do it, because 4K60 sits on the fallthrough AUTO. ⚠ Every new nvenc_core item is linux-gated: the arbiter is wired into the Linux backend only for now and nvenc_core compiles on Windows too. Caught by the .133 check, not by reasoning — the first cut failed Windows clippy with 12 dead_code errors, the exact item-level trap this file already carries a scar from. Verified .21: clippy --features nvenc --all-targets -D warnings clean, 62 unit tests (4 new arbiter tests), 23/23 NVENC on-hardware green including a new end-to-end convergence test asserting ZERO extra IDRs and a cached verdict. Verified .133: Windows clippy -D warnings clean, zero dead_code. fmt clean.	2026-08-06 23:26:47 +02:00
enricobuehler	e6bcac8770	chore(license): name the copyright holder "unom - Enrico Bühler" ... "unom" alone is not the legal entity name. Updated the copyright line in all nine first-party license files -- the root MIT/Apache pair and the hand-maintained copies under clients/apple, clients/decky, packaging/windows/drivers and packaging/windows/pf-vkhdr-layer (there is no script that syncs these, so each is edited directly). The Linux and Windows clients' About screens pick this up automatically: both `include_str!` the root LICENSE-MIT / LICENSE-APACHE at compile time. Deliberately untouched: - Third-party license texts (Geist OFL, FFmpeg, VB-CABLE, the vendored pyrowave/Granite tree, KDE protocol XMLs, the os-icon licenses) -- those are other parties' copyrights. - Publisher/author/maintainer metadata, which is identity rather than license text and is reported separately for a decision.	2026-08-06 23:16:16 +02:00
enricobuehler	9c7409ea40	Merge pull request 'fix(web/plugins): a plugin's interface loads again, instead of an empty panel' (#80) from worktree-plugin-ui-frame-ancestors into main ... Reviewed-on: #80	2026-08-06 21:15:58 +00:00
enricobuehler	b0ec759fad	fix(brand): capitalize "Punktfunk" in user-facing text ... The docs site's page title read "punktfunk docs". Fixed that and swept the rest of the tree for the same defect, capitalizing the brand wherever it is shown to a human and leaving it lowercase where it is a technical identifier (CLI/package names, `punktfunk://` scheme, PnP enumerator, TLS SNI, logcat tag, config paths, CMS tenant id). User-visible fixes: - docs-site: page title -> "Punktfunk Docs"; API reference title, meta description and the branded bar's aria-label; the BrandMark/Wordmark SVG accessible names (the web console already had these capitalized -- the docs site had drifted from it). - Android: six strings of live UI copy -- the local-network permission dialog (x2), the connect-screen error banner, and the no-controller explainer. - Apple: the "No Hosts" empty-state text and the fallback display name for a host that advertises no instance name. - Windows client: the `--discover` progress line. - KWin fake-input: the application name passed to `authenticate()` (the grant is cached per-exe, so the string is display-only). - THIRD-PARTY-NOTICES: fixed in both generators (about.hbs and gen-third-party-notices.py) and applied to the three checked-in outputs so they match what a regeneration now produces. Every changed line differs from the original only by letter case, so line lengths are unchanged and no formatter width rule is affected. `cargo fmt --all --check` passes.	2026-08-06 23:10:25 +02:00
enricobuehler	96fc3eca10	test(vkdecode): the AV1 rung finally has pixels to answer to ... A parity and smoke harness for AV1, mirroring the H.264 and H.265 legs that proved those rungs bit-identical to libavcodec on four drivers before either ran on glass. This was the milestone's largest test gap: the adversarial review found four blocking defects in the AV1 conversion — flags unset on 274 frames of 274, a units error in LoopRestorationSize, per-reference info describing the wrong picture, film-grain fields left zero — and every one of them would have shown on frame 1 of a parity run, while clippy and 164 green unit tests said nothing at all. The golden is 250 per-frame SHA-256s in DISPLAY order, not 274. The vector carries 274 coded frames in 250 temporal units; the 24 extras are hidden ALTREFs, decoded and referenced but never shown, and the rung delivers what dpb.outputs names. The count is re-derived from the planner rather than assumed. Cross-checked between ffmpeg 8.1.1 on macOS arm64 and 8.0.1 on Linux x86_64, whose raw outputs are byte-identical — and then against a third party neither build knows about: the vendored vector ships upstream's own per-frame MD5s, and re-running those reproduces all 250. The golden agrees with a decode nobody in this program performed. I reproduced both independently before committing. 8-bit NV12, traced from the sequence header rather than presumed (seq_profile 0, high_bitdepth 0, mono_chrome 0), so the P010 scar does not apply here — and the header says which check to make if a Main 10 golden is ever added. film_grain_params_present is 0, which is load-bearing: grain synthesis is part of the Vulkan decode profile, so this golden is only comparable against a grain-less profile key. Anti-vacuity is the point of the exercise, so it is structural. The golden guard asserts the exact count, that every line is a bare digest, and that all entries are DISTINCT — 250 copies of one digest would let a decoder frozen on a single frame pass parity. The parity body asserts the golden set and the access-unit count before it touches hardware, so an IVF reader returning nothing cannot become "0 frames compared, pass". The agent verified the guards fire by mutating the golden three ways. assert_bit_identical now names the FIRST divergent frame, which is what localises a defect; that improves all six legs, not just AV1. AV1 has no four-byte-start-code twin, deliberately: OBUs are length-delimited, so there is no prefix for a driver to mis-skip. Documented where a reader would otherwise see an omission. Nothing here has run on a GPU. The harness exists precisely so the four review defects can be answered by measurement instead of argument.	2026-08-06 22:38:04 +02:00
enricobuehler	185a69c806	fix(web/plugins): a plugin's interface loads again, instead of an empty panel ... Two separate things had to be wrong for this, and both were. The frame's own policy locked it out. Plugin UIs moved to their own origin so a plugin cannot act as the logged-in operator, and the plugin origin names the console as the only page allowed to frame it. It built that name from the incoming request — but Nitro hands the app a synthetic request with no TLS socket, so an HTTPS console reads back as `http:`. The header said `frame-ancestors http://host:47992` while the operator was on `https://host:47992`, and the browser refused the frame outright (ERR_BLOCKED_BY_RESPONSE). Nothing on screen said so; the reason was only in devtools. The scheme now comes from the listener's own TLS state, stamped at bind time, with x-forwarded-proto winning when something in front terminated TLS for us — the one case where the browser's scheme is not ours. And the port was shut. 47993 was added to the firewall definitions, but an already-open firewall does not pick a new port up: ufw expands an app profile into rules when you allow it and keeps those, so editing the profile on upgrade changes nothing, and firewalld needs a reload. Every upgraded Linux host kept a 47992-only rule, silently. The packages now notice on upgrade and print the one command that fixes it, without touching the running firewall. The NixOS module and the container image never learned the port at all; both now open it. Also: the console no longer mounts the frame while it is still checking whether that origin is reachable. A firewalled port drops rather than refuses, so the check hangs for the browser's whole connect timeout, and mounting meanwhile is exactly the empty panel with no explanation. The card that follows now names both causes it can be — an untrusted certificate for that port, or a closed one — because from a browser the two are indistinguishable. The rule is now a pure function with tests, since its failure mode is a well-formed header that only a browser rejects. Verified on glass against home-worker-5 (.21) and its ROM Manager plugin: the frame was refused before, renders the plugin's UI after.	2026-08-06 22:33:57 +02:00
enricobuehler	9a1d8be4cc	fix(pf-encode): AUTO split is conditional on sub-frame — do NOT retire the arm ... Last change's docs concluded "AUTO never splits, retire the arm" from the sub-frame-ON measurement alone. Measured the missing leg before implementing it, and the conclusion was wrong. On .21 at 4K, plain AUTO (env unset, the resolver's fallthrough): sub-frame ON -> 5023/5157 us/frame ~= DISABLE 4979/5000 (does NOT split) sub-frame OFF -> 2401/2352 us/frame ~= TWO_FORCED 2319/2378 (DOES split) So AUTO is CONDITIONAL, not dead. Retiring it would have silently cost every sub-frame-off session its second engine -- a regression introduced while "cleaning up" an arm that looked inert. Split and sub-frame are mutually unsupported for HEVC, so the driver resolves AUTO to no-split only in that combination. Fix is disclosure, not removal: - resolve_split_subframe debug-logs the inert HEVC + AUTO + sub-frame case, which is the fleet default shape: "split_mode=AUTO" has meant "no split" for every default session and nothing said so. Deliberately NOT rewritten to DISABLE -- the mode we pass is what the driver was actually given, and the ceiling-cache key must keep describing that. - New unit test `auto_survives_the_arbitration_in_both_subframe_states` pins the contract so the arm cannot be simplified away later. - The resolver doc now records both measured legs instead of "AUTO is dead". Also in this change: - WP1.6: `resolve_subframe`'s doc said "Windows passes `false`". Stale since the 2026-07-31 .173 A/B flipped Windows to caps-gated default-on. It mattered: it made the AUTO-plus-sub-frame dead combination look Linux-only when it is fleet-wide. - Windows session-ready log parity: split_mode + engines + subframe. The Windows line had no split_mode at all, so a Windows field report could not answer "did this session actually split?" -- the question that started this whole thread. Verified: fmt clean; .21 clippy -p pf-encode --features nvenc --all-targets -D warnings clean, 58 unit tests (1 new), 22/22 NVENC on-hardware tests green; .133 Windows clippy --features nvenc --all-targets -D warnings clean (15m cold, zero errors or warnings) -- the Windows backend is cfg'd out on both macOS and the Linux box, so that leg needed a real Windows host.	2026-08-06 22:25:10 +02:00
enricobuehler	a404830456	feat(client): wire AV1 into the native Vulkan rung, pin-only ... The third codec arm in video_vk_native, AV1 admitted to native_codec and to native_vulkan_gate by pin only. It stays out of `auto` on the same rule M5's D3D11VA rung follows: `auto` admission is earned with hardware evidence, and this has decoded nothing on a device. is_integrity_warning_av1 did not exist, so the client could not have concealed AV1 damage at all. Added, exhaustive, no wildcard: all three AV1 warnings really are damage, because AV1 has no spec-legal-but-noisy signal to mis-classify — no reorder envelope to announce, no MMCO to rebase — and the exhaustive match is what stops a future variant defaulting to clean. The blocking defect review found was two safety mechanisms cancelling each other. After a failure the decoder skipped to the next key frame answering Ok(None), and because AV1's planner has no flush its store kept planning cleanly, so those AUs carried no warnings and the client read them as proof the rung works — clearing the demotion streak and resetting its clock on every one. The streak could then never reach the threshold, which made the never-delivered fall-through to FFmpeg-Vulkan unreachable, which is the documented backstop for exactly three things: a level above maxLevelIdc, a sequence header disagreeing with the Welcome, and film grain. Film grain is the probe's own admitted assumption, so a grain stream would have frozen the screen for the session while DecodeHealth reported run 0 — recovered. AV1 now answers the wait with an error, as H.264 and H.265 already do through AwaitingIdr, so all three codecs are indistinguishable to the demotion machinery. That matters more than the extra precision of a third state: only the H.26x paths have hardware evidence, and they are proven WITH that behaviour. The obvious form of that fix would have wedged the decoder. A key frame can sit behind a skipped frame inside the same temporal unit — the vendored vector has 24 two-frame units — so erroring out of the per-plan loop would never reach it and the wait would never end. Skips are therefore counted per frame and the error raised only when the whole unit was skipped, with the metadata-only unit staying a clean Ok(None). Also closed: a refused temporal unit left an already-decoded frame in the ready queue, which shipped on the next AU as a clean success — putting a picture from a refused AU on screen, clearing the streak again, and latching delivered so the fall-through was disabled for good. The error arm now drains and releases unshown. MAX_DELIVERABLE is derived rather than picked: HOLD_HEADROOM minus the pipeline's own hold, pinned to pf-vkdecode's constant so a hardcoded depth fails the build. At the previous 8 the queue plus the presenter's 4-7 stood against a headroom of 8, so it capped memory without preventing the exhaustion it named, and a frame waiting 8 AUs burned 16 of the 17 query slots — where a re-armed slot reads as Failed and becomes a fabricated driver-corruption verdict in the very counter the Ally X signal lives in. The trim now runs after this AU's frame is taken, or at the derived depth it would drop a two-output unit's first frame and invert display order inside one AU. Its justification was also wrong: the claim that a temporal unit may carry a show_existing_frame alongside a shown frame is disproved by this repo's own golden — 250 units, 250 shown, zero show_existing. The bound is kept as defence in depth against a non-conformant or multi-operating-point stream, and now says so. Gates: macOS fmt/clippy/392 tests, container clippy -D warnings over six crates, 851 tests, workspace check. No hardware: the rung is pin-only and has still never decoded a frame on a device.	2026-08-06 22:19:22 +02:00
enricobuehler	88f29a9411	feat(pf-encode): use every NVENC engine the GPU has, not a hard-coded two ... WP1.1 plus the engine-count fix. `resolve_split_mode` forced TWO_FORCED at high pixel rate regardless of hardware, so a 3-NVENC part (GB202, AD102 workstation) left a third of its encode silicon idle, and a 1-NVENC part paid a wasted session open to discover it could not split. Probes NV_ENC_CAPS_NUM_ENCODER_ENGINES in both direct-SDK backends' query_caps (the cap is `= 49` in both linux_sys and windows_sys of the vendored SDK 0.4.0 -- the caps enum is cfg-selected per-OS, so that was checked) and latches it on a backend field. NOT on EncoderCaps: nine backends construct that struct as exhaustive literals, so a new field would be a 9-site change of which 7 are unrelated codecs passing a meaningless value, and the only consumer is the resolver. New `max_forced_split_mode(engines)`: 1 -> DISABLE, 2 -> TWO, 3 -> THREE, and >3 -> AUTO_FORCED, because NV_ENC_SPLIT_ENCODE_MODE cannot NAME more than three (NVENCAPI 12.1; values 4..14 are unallocated, so a future API may extend it) and AUTO_FORCED = "split, driver picks how many" is measurably a real split (2.01x vs disabled on .21). 0 = unprobed keeps the historical two-engine assumption. ⚠ WHY THE CLAMP EXISTS, measured on .21 (RTX 5070 Ti, 2 NVENC, 4K HEVC): requesting THREE_FORCED was HONOURED -- session opened in mode 3 -- and ran at 2303 us/frame, identical to TWO_FORCED's 2308. The driver does not reject an over-ask; it silently encodes narrower. So the rejection fallback cannot find the ceiling and PUNKTFUNK_SPLIT_ENCODE=3 on a 2-engine card would have logged a 3-way split over a 2-way encode. Operator overrides are now clamped with a warn. The ordering trap is covered by a test: on a >3-engine part hw_max is AUTO_FORCED (1), which is not "narrower than" TWO_FORCED (2) despite comparing smaller, so a naive min() would collapse a legitimate 3-way request to AUTO. Also adds `engines` and `subframe` to the Linux session-ready log: split_mode alone is ambiguous between "used both engines" and "left a third idle", and since the driver honours an over-wide request the mode cannot be read without the ceiling it was chosen from. This is the line a field report needs. --- and a correction to S1b, in the same change --- Re-running S1b afterwards flipped its verdict to "the driver appears to have IGNORED the in-place split change", contradicting the isolated runs that produced the |C-B|=34 figure already written into the design docs. Investigated rather than re-rolled. The switched leg was landing MIDWAY between the arms (~3600 us against A~5050, B~2300) and the nearest-neighbour verdict flipped on noise. Cause: split-encode does not reach steady state on the first frame -- a FRESH TWO_FORCED session shows it too (early-half 3280 us vs late-half 1996 in one run), so it is split warmup generally, not something specific to reconfiguring in place. A single median over the whole window cannot see that. The test now reports early-half vs late-half and gives a switched leg SETTLE=16 frames before its window opens, every leg the same length. With that, 4/4 runs agree: the switched leg reaches ~2030 us against a fresh-split ~2000 and a single-engine ~4900. ⚠ S1b's CONCLUSION stands (the switch does take effect) but the evidence behind the committed number did not reproduce; the docs are corrected rather than left implying a cleaner result than the harness could support. ⚠⚠ This is a WP3 REQUIREMENT, not just a test fix: a live-session arbitration that switches arms and immediately measures will misjudge the arm it just chose, because the encoder needs ~16 frames to settle. The settle window has to be part of the arbitration, and it is now a measured number rather than a guess. Verified on .21: clippy --features nvenc --all-targets -D warnings clean, 57 unit tests (3 new), all 23 NVENC on-hardware tests green, fmt clean. The 3 failing on-hw tests in a full --ignored run are VAAPI (no AMD/Intel GPU on that box -- their own ignore reason says so), pre-existing and unrelated.	2026-08-06 21:54:00 +02:00
enricobuehler	50fa228bab	Merge pull request 'feat(client/android): copy a host's punktfunk:// link' (#79) from worktree-android-copy-link into main ... Reviewed-on: #79	2026-08-06 19:32:31 +00:00
enricobuehler	70b81ac3d7	test(pf-encode): S1c + the D5 confirm — pair flips in place, AUTO really is dead ... S1c `nvenc_cuda_split_subframe_pair_reconfigure`: the leg S1a/S1b excluded. Both pinned sub-frame OFF to isolate the split variable, but a real HEVC arbitration cannot -- split and sub-frame are mutually unsupported there, so engaging split means flipping enableSubFrameWrite in the same breath, a second init param and the one the reconfigure path deliberately pins. RESULT on .21: the PAIR moves in place, accepted, ZERO IDRs, both directions. It also pins the invariant that makes this safe to build on: `subframe_chunks` is latched ONLY in the init path (~line 1625) and is NOT recomputed by reconfigure_bitrate, so a caller flipping sub-frame in place must clear it too or supports_chunked_poll keeps reporting true and poll_chunk busy-polls its whole budget every AU against a numSlices that never advances. The test performs the correct sequence and asserts the state stays coherent, so WP3 has a worked example rather than a warning. `nvenc_cuda_auto_split_with_subframe`: the D5 confirm -- the one claim in the design's defect list that was only ever inferred. The driver reports no "mode I actually chose", so it is settled by timing, at 4K where the gap is ~2x. RESULT: AUTO (env unset) + sub-frame 4904 us/frame, DISABLE + sub-frame 5062, TWO_FORCED without sub-frame 3464. AUTO sits 158 us from DISABLE and 1440 from TWO_FORCED ⇒ D5 CONFIRMED: plain AUTO does not split while sub-frame is on, so the resolver's AUTO fallthrough reads as "let the driver decide" and means "never split". ⚠ TRAP, hit on this test's first run and now documented in it: the env knob CANNOT express plain AUTO. `0` is DISABLE and `1` is AUTO_FORCED, and resolve_split_subframe counts AUTO_FORCED as forced, so passing `1` silently disarms sub-frame and measures a different configuration entirely -- which produced a spurious "D5 REFUTED". Plain AUTO is only reachable as the resolver's fallthrough with the env unset. The leg now asserts sub-frame resolved TRUE, so the test can no longer answer the wrong question quietly. Verified on .21: clippy --features nvenc --all-targets -D warnings clean, all 4 spikes green, the normal 54-test suite unaffected, cargo fmt --all --check clean.	2026-08-06 21:27:18 +02:00