punktfunk/docs-site/content/docs/stats.md

title, description

title	description
Understanding the Stats Overlay	What every number in the punktfunk stats HUD means, and how to compare them fairly with Moonlight/Sunshine.

Every punktfunk client has an in-stream stats overlay. All clients use the same vocabulary, the same measurement points, and the same math, so a number on your phone means exactly what the same number means on your desktop.

The four measurement points

Every latency figure is the time between two of these four points in a video frame's life:

1. capture — the host grabs the frame from the (virtual) display. Stamped on the host's clock and carried with the frame.
2. received — your client has fully received and reassembled the frame from the network (after any FEC recovery), before decoding.
3. decoded — the video decoder has produced the picture.
4. displayed — the picture is handed to the screen (as close to "photons" as the platform lets us measure).

Reading the overlay

1920×1080@120 · 119 fps · 38.2 Mb/s · HEVC 10-bit HDR · GPU decode
end-to-end 14.2 ms p50 · 19.8 p95 · capture→on-glass
= host+network 9.8 + decode 2.1 + display 2.3
lost 3 (0.1%) · skipped 1 · FEC 12

• Line 1 — the stream. Resolution@refresh, frames received per second, and the received video bitrate (goodput — FEC overhead not counted), plus codec details.

• Line 2 — the headline. end-to-end is the directly measured time from host capture to the endpoint named at the end of the line (capture→on-glass here). p50 = the typical frame (median), p95 = the slow outliers. This is the one number that summarizes your stream.

• Line 3 — where the time goes. The three stages tile the end-to-end interval — each starts where the previous one ends, so they add up to the headline:

  • host+network — capture → received: the host's capture/encode/send pipeline plus the network flight and reassembly, in one number.
  • decode — received → decoded, on your device.
  • display — decoded → displayed: waiting for the right screen refresh, rendering, and vsync.

  (Stage values are per-stage medians, so they sum only approximately to the headline median — percentiles aren't perfectly additive. The headline is measured directly, never computed as a sum.)

• Line 4 — reliability (only shown when something is nonzero). lost = frames the network dropped beyond FEC's ability to recover; skipped = frames your client chose not to display because a newer one had already arrived; FEC = packet shards the error correction recovered this second (loss that you didn't feel).

All values refresh once per second over the last second of frames.

Clocks, and the (same-host clock) tag

end-to-end and host+network span two machines, so they need the two clocks to agree: at connect, the client runs an NTP-style handshake with the host and corrects for the measured clock offset. If that handshake wasn't possible, the overlay appends (same-host clock) — the numbers are then only trustworthy when client and host run on the same machine. decode and display are single-machine measurements and are always exact.

What each platform can measure

Not every platform exposes a true "displayed" instant, so the headline's endpoint is always spelled out rather than pretending:

client	headline	why
Windows, macOS/iOS (Metal presenter), Linux	capture→on-glass / capture→displayed	present instant available (GTK measures at hand-off to the compositor, which adds about one compositor cycle after it)
Android	capture→decoded	the display hand-off happens inside MediaCodec/SurfaceView where precise present timing isn't exposed
macOS/iOS fallback presenter	capture→received	the system video layer hides decode and present timing entirely

A shorter chain means the number is smaller because it measures less — check the endpoint before comparing two devices.

Comparing with Moonlight / Sunshine

Moonlight's overlay and punktfunk's measure different slices of the pipeline, and the single biggest difference is:

Moonlight has no end-to-end number. Its overlay shows separate client-side segments (decode time, queue delay, render time) and — on Sunshine hosts — a host-side number. Nothing in Moonlight measures capture-to-glass, and nothing measures the network flight of video frames. punktfunk's end-to-end line has no Moonlight counterpart — never compare it against any single Moonlight line.

To compare fairly, reconstruct an approximate end-to-end from Moonlight's lines:

Moonlight ≈ host processing latency (avg)
          + ½ × average network latency
          + average decoding time
          + average frame queue delay
          + average rendering time

…and compare that against punktfunk's end-to-end. (It's still approximate: Moonlight's segments are averages over a slightly different window, and the ½·RTT term stands in for a one-way frame flight that Moonlight doesn't measure.)

Line-by-line matrix

Moonlight overlay line	What it actually measures	punktfunk equivalent	Comparable?
Video stream: WxH FPS	Received plus inferred-lost frames/s (host-rate estimate from frame sequence gaps)	fps (line 1)	≈ equal when loss is near zero; punktfunk counts received frames only
Incoming frame rate from network	Frames reassembled from the network per second	fps (line 1)	Yes — direct
Decoding frame rate (desktop only)	Frames leaving the decoder per second	not shown separately (equals fps unless the decoder is falling behind)	—
Rendering frame rate (desktop only)	Frames actually presented per second	fps minus skipped	Approximately
Host processing latency min/max/avg (Sunshine hosts)	Host capture → just-before-send, reported by Sunshine per frame	contained inside host+network; the host-side breakdown lives in the punktfunk web console (capture/encode/send stages)	Indirect — punktfunk's host+network additionally includes the network flight
Frames dropped by your network connection	Frame-sequence gaps ÷ total frames	lost (line 4)	Yes — direct
Frames dropped due to network jitter	Decoded frames the client's pacer chose to drop ÷ decoded frames	skipped (line 4)	Approximately (both are client-side pacing decisions, despite Moonlight's name)
Average network latency	The control connection's round-trip time (ENet RTT + variance) — not video frame latency	none, on purpose	No. An RTT is not a frame latency; punktfunk measures the actual per-frame path instead
Average decoding time	Mean time from decoder enqueue to picture out	decode (p50)	Yes (mean vs median; both include decoder queueing)
Average frame queue delay	Mean time a decoded frame waits for its vsync slot	inside display	Sum the two Moonlight lines →
Average rendering time (incl. V-sync latency)	Mean duration of the present call	inside display	…and compare against punktfunk's display
(no equivalent)	—	end-to-end — true capture→glass, clock-skew-corrected across machines	punktfunk only
(no equivalent)	—	FEC recovered shards (loss absorbed invisibly)	punktfunk only

Other differences worth knowing when squinting at both overlays side by side:

• Averages vs percentiles. Moonlight's time values are means; punktfunk shows medians (p50) with a p95 for the headline. Under jitter, a mean sits above the median — Moonlight's numbers read slightly "worse" than an equivalent p50.
• Windows. Both refresh about once per second; Moonlight over a ~1–2 s sliding window, punktfunk over the last full second.
• Host frame rate. Moonlight's headline FPS estimates what the host produced (received + lost). punktfunk shows what your client actually received, and reports loss separately.