The FlowBoxChild draws the hover/selection highlight AROUND the card
(it wraps it with its own padding ring), so its default corner radius
ran visibly tighter than the card's 12px inside it. The host grids now
scope a 15px radius onto their children — card radius + the ring — so
the highlight's corners run concentric with the card's.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The client now advertises VIDEO_CAP_10BIT|HDR and carries the result all
the way to glass:
- csc_rows is bit-depth exact (10-bit limited code points differ from
8-bit by ~half a code) and folds in the P010/X6 MSB-packing factor;
new 10-bit white/black tests.
- The CSC shader grows a params block: mode 0 passes the transfer
through (SDR as-is, or PQ onto an HDR10 swapchain); mode 1 tonemaps
PQ→SDR in-shader (ST.2084 EOTF, 203-nit reference white exposure,
BT.2020→709, soft maxRGB rolloff, sRGB encode) for desktops without
an HDR surface. PUNKTFUNK_TONEMAP_PEAK tunes the rolloff.
- The presenter probes VK_EXT_swapchain_colorspace + an HDR10/ST.2084
10-bit surface format and flips modes in-band with the stream's PQ
signaling: fence-quiesce, then CSC pass + video image (10-bit
A2B10G10R10 intermediate — PQ in 8 bits bands) + overlay pipe +
swapchain rebuild through the deferred-destroy rules.
- P010 decodes through all three paths: Vulkan Video (X6 multiplanar
pool, R10X6 plane views), VAAPI dmabuf (R16/RG1616 plane imports),
software (swscale as before).
- session pump advertises the caps; the host still gates Main10 behind
its PUNKTFUNK_10BIT policy.
Probed on glass hardware: the KDE/NVIDIA surface exposes
A2B10G10R10+HDR10_ST2084, so true PQ passthrough is available there.
Known v1 gaps: software-decode PQ shows untonemapped (8-bit RGBA
carries the transfer baked); the SDR overlay composites unscaled onto
an HDR10 surface (dim OSD); no vkSetHdrMetadataEXT yet.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Vulkan path's receive_frame returns at SUBMISSION (~0.1 ms) — the
hardware decodes asynchronously, so the decode stat was truthful but
measured the wrong boundary. The pump now ships the frame to the
presenter FIRST, then waits the frame's timeline fence (vkWaitSemaphores
resolved through the shared device's proc chain) and stamps
received→decode-COMPLETE — true NVDEC time at zero pipeline cost, since
the presenter's own GPU wait is what actually gates sampling. Software/
VAAPI keep their synchronous stamps.
Also: Alt+Enter joins F11 as the fullscreen toggle (some keyboards' Fn
layer sends a media key for plain F11 — observed on glass as
'F11 only works with shift'); the shell's shortcuts panel lists both.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
FFmpeg's Vulkan Video decoder now runs on the PRESENTER's own VkDevice —
the decoded VkImage feeds the existing CICP CSC pass directly: zero
copy, no interop, and NVIDIA gets hardware decode for the first time
(its VAAPI is unusable by design). One decode architecture for every
vendor going forward; VAAPI-dmabuf and software remain the fallbacks
(auto: vulkan → vaapi → software; PUNKTFUNK_DECODER=vulkan pins it).
Presenter: instance 1.3; probes VK_KHR_video_queue/decode_queue + codec
extensions, a VIDEO_DECODE queue family (+ its codec caps via
QueueFamilyVideoPropertiesKHR), and the samplerYcbcrConversion/
timelineSemaphore/synchronization2 features — all enabled at device
creation when present, exported as a VulkanDecodeDevice handle bundle.
Decoder: AVVulkanDeviceContext built over those handles via pf-ffvk
(features chain, extension lists, deprecated queue indices + the qf[]
map); get_format supplies OUR frames context with MUTABLE_FORMAT so the
presenter's per-plane views are legal; output is DecodedImage::VkFrame
carrying AVVkFrame/frames-ctx pointers plus the lock fns.
Present: R8+R8G8 plane views over the multiplanar image, the live sync
state read under the AVVulkanFramesContext lock, a timeline-semaphore
wait(sem_value)/signal(sem_value+1) folded into the submit, layout/
queue-family/sem_value written back per FFmpeg's contract, and the frame
guard parked in the retire queue until the fence. CSC pass + video
framebuffer are now unconditional (NVIDIA has no dmabuf-import path).
Verified on the RTX 5070 Ti: device creates with decode_qf=3,
caps=DECODE_H264|H265|AV1|VP9; swapchain unaffected. Live stream
validation next.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The GTK client becomes a relm4 component tree: AppModel owns the window,
trust gate (rules 1-3), and the spawned session child's lifecycle as
typed messages; the hosts page is a child component with a
FactoryVecDeque of host cards — the HostsCallbacks Rc<dyn Fn> bag, the
busy Cell, and the Rc<RefCell<HostsUi>> cross-page pokes are gone.
Trust/settings/library dialogs stay plain GTK, invoked from update with
a ComponentSender.
Deleted with the in-process presenter: ui_stream.rs, video_gl.rs,
ui_gamepad_library.rs, launch.rs, the khronos-egl dep, and the
PUNKTFUNK_LEGACY_PRESENTER hatch. Every stream (and the console library)
now runs in punktfunk-session; the shell spawns it for card connects and
exec's it for --connect/--browse so the Decky wrapper keeps working. The
request-access flow gains --connect-timeout + a CancelHandle that kills
the child. Screenshot scenes re-pointed onto the components (verified:
hosts + library self-capture; the dialog scenes present correctly and
capture under a GL renderer); the gamepad-library scene is gone with the
page.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The run loop grows a browse mode: the console library idles between
streams in ONE window (no gamescope handoff), overlay actions launch
sessions via run_browse's callback, session end returns to the library.
The Overlay contract gains menu routing (MenuEvent → haptic pulse),
action draining, and session-phase edges.
pf-console-ui ports the GTK launcher wholesale: the coverflow's springs,
cursor arithmetic and recede/tilt constants move verbatim with their
tests (plus new projection tests — focused-card centering, the inner-
edge-recedes corridor); paint order is draw order (the gtk::Fixed
restack hack is gone); the aurora renders as an SkSL runtime shader at
full rate on every box (the 30 Hz CPU-upscale path and its frozen-on-
Deck fallback are deleted — the generated SkSL is compile-tested);
titles/scenes shape through textlayout (CJK-safe). Poster art streams
in as encoded bytes through the shared model and decodes renderer-side.
The session binary wires --browse host[:port] [--mgmt PORT]: KnownHosts
lookup (unpaired renders the pair-first scene), library + art fetch on
threads, PUNKTFUNK_FAKE_LIBRARY dev hook, and a session_params helper
shared with --connect. The minimal build refuses --browse cleanly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The §6.1 presenter↔console-UI contract lands: pf-presenter exposes its
device (SharedDevice) and composites at most one premultiplied-alpha
quad per frame (new overlay.frag + LOAD render pass over the swapchain;
zero cost while the overlay returns None). pf-console-ui implements it
with skia-safe on the shared VkDevice: DirectContext via the ash
dispatch chain, a ring of two offscreen render targets (one-frame-in-
flight safe), damage-driven redraws — the OSD re-renders at 1 Hz, the
hint on capture toggles, nothing per-frame. Skia never touches the
swapchain. The session binary carries it behind the default ui feature:
4.9 MB stripped without, 10 MB with (measured).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Faults every dmabuf import so the failure-streak → force_software →
software-decode recovery is exercisable on healthy hardware — the plan's
§8 phase-2 acceptance requires demoting via a deliberately faulted
import rather than waiting for a broken driver.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
start_session_with routes desktop windowed connects to the spawned
Vulkan session binary (--connect --fp, --launch, --fullscreen from the
stream setting); spawn.rs bridges its stdout contract into the shell —
spinner until {"ready":true}, banner from the error/ended JSON line,
exit 3 + trust_rejected routed to the re-pair PIN ceremony, TOFU pins
the advert fingerprint only once the child proves it on a real connect.
The in-process GTK presenter stays for PUNKTFUNK_LEGACY_PRESENTER=1,
Gaming-Mode/--fullscreen and --browse launches (no second toplevel under
gamescope until phase 4 moves the console UI), the request-access flow,
and any spawn failure (silent fallback).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The decoder's NV12 dmabuf imports per-plane (R8 + GR88, explicit DRM
format modifier, dedicated dup'd-fd import, FOREIGN→graphics acquire)
and a fullscreen-triangle render pass converts it into the presenter's
video image with the CICP-driven coefficients ported from video_gl.rs
(same tests, plus a rows-vs-matrix agreement check). SPIR-V is committed
(shaders/build.sh regenerates) so builds and CI need no toolchain. The
import extension set is probed at device creation; unsupported boxes and
3-failure streaks demote the decoder to software via the existing
force_software contract. The session binary now honors the Settings
decoder preference instead of forcing software.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
punktfunk-session streams one --connect session in an SDL3 window: ash
swapchain with a transfer-only letterboxed blit of the software-decode
path (no graphics pipeline until the phase-2 dmabuf/CSC pass), the
ui_stream input-capture state machine on SDL events (scancode→VK table
cross-checked against the evdev one), gamepads via a new caller-pumped
GamepadService mode (SDL video owns the main thread here), and the
shell↔session stdout contract: {"ready":true}, per-window stats:
lines, JSON error + exit codes 0/2/3/4. Strict trust — no pin, no
connect. Design: punktfunk-planning linux-client-rearchitecture.md.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Session pump, FFmpeg decode, PipeWire audio, SDL3 gamepads, keymap, trust
store, mDNS discovery, library client and Wake-on-LAN move verbatim from
clients/linux into crates/pf-client-core, shared with the upcoming Vulkan
session binary (punktfunk-planning: linux-client-rearchitecture.md).
The GTK client re-exports them at the crate root so every existing
crate::-path keeps resolving; its manifest drops the moved-only deps.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Windows was missing two of the four stream shortcuts the GTK client has:
Ctrl+Alt+Shift+S (toggle the stats overlay live) and F11 (toggle fullscreen).
Add both to the low-level keyboard hook — S flips a HUD_VISIBLE atomic seeded
from Settings::show_hud at install (Settings is the default, the key overrides
it for the session, matching GTK), F11 drives a borderless-fullscreen toggle on
the window HWND and re-locks the pointer geometry for the new client rect. Both
are consumed locally, never sent on the wire.
Surface the full key set in two places, on both clients:
- in the UI: a read-only "In-stream keyboard shortcuts" reference card in the
Windows Settings > Input section (the counterpart of the GTK Shortcuts
window), plus the expanded HUD hint; the Linux keyboard hint gains F11.
- at stream start: a bottom-centre banner listing the shortcuts for the first
few seconds of every session, independent of the HUD setting. Linux gets the
matching start-flash of its capture hint (capture engages on map and hid it,
so the keys were never shown until the first release).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The async decode loop (burst-feed + present-newest-per-vsync, the Apple client's
discipline) plus the per-SoC tuning was gated behind an experimental,
default-off toggle after the 5dc24a0 overhaul regressed on some phones. That
regression was the receive-side latency ratchet the async loop fed — a standing
queue that only grew — now fixed in the shared core (FrameChannel jumps to live
instead of accumulating it), so the fast pipeline is the default again.
Default the master toggle on via a fresh pref key (low_latency_mode_v2),
mirroring the migration da376b31 used to flip it off: a new key re-defaults every
install — including ones persisted off under the old key — to on, so the
promotion reaches users who had saved settings, not just fresh installs. Both
stale keys are abandoned unread. Toggle-off still restores the original
synchronous decode pipeline byte-for-byte as a per-device escape hatch.
Drop "(experimental)" from the settings labels and fix the now-stale default-off
wording in the native + Kotlin docs. No decode-path routing change — run_async is
reached simply because the toggle now defaults on.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The full git.unom.io package URL is painful to read/type on a Steam
Deck's on-screen keyboard; unom.io/pf-decky now redirects to it
(added in unom/infra's Caddyfile). Canary/pinned links stay long-form
since only /latest gets a short link.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Cargo's debug profile is not "slower" for this library — it is unusable, and
it invalidated every on-device performance test to date: RustCrypto's AES-GCM
compiles to generic-array iterator closures with per-byte precondition checks
instead of ARMv8 hardware AES. Profiled live on a phone (simpleperf, 62k
samples): ~800 µs of user CPU per 1.4 KB packet — the receive pump pinned
above a full core yet only draining ~1,400 pkt/s of a 1,775 pkt/s (20 Mbps)
stream, 2.3 MB standing in the kernel socket buffer, the latency-bound flush
firing every 2 s forever. With release rust in the same debug APK: pump at
~12 % of a core, socket queue zero, no flushes, 2800x1260@120 streaming clean.
preDebugBuild now depends on cargoNdkRelease; `-PrustDebug` opts back into a
debug-profile native build for sessions that actually step through Rust.
Kotlin debuggability is unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
WifiLock.acquire() enforces the WAKE_LOCK permission, which the manifest never
declared — every acquisition since the first Wi-Fi lock shipped threw
SecurityException, silently swallowed by a bare runCatching. The phone's own
accounting proved it (dumpsys wifi: high_perf/low_latency active_time_ms = 0
across weeks of streams): every on-device session ran with Wi-Fi power save
fully active, whatever the code intended. Verified live after the fix: both
locks registered in WifiLockManager, mPowerSaveDisableRequests=2, ping RTT to
the streaming phone 3.8 ms avg. A failed acquire now logs loudly — this class
of failure must never be invisible again.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The baseline stream held only WIFI_MODE_FULL_HIGH_PERF, which is deprecated
AND non-functional on recent Android — so with the low-latency toggle off (the
default) Wi-Fi power save stayed fully active: downlink delivery clumped at
beacon intervals (a few hundred ms of latency mush, sawtoothing bitrate) and
the AP's power-save buffer periodically overflowed, killing whole frames every
few seconds (the host log's alternating loss_ppm=0/50000). Now every stream
holds FULL_LOW_LATENCY (API 29+, the only effective power-save disable;
foreground + screen-on, which a stream always is) AND FULL_HIGH_PERF (covers
older releases) — the same pair Moonlight holds. The experimental toggle no
longer selects the lock mode.
Also: declare tracing's "log" feature explicitly in the native crate (core
transport warnings → logcat must not hinge on quinn's default features), and
align the low-latency toggle's copy with its actual scope.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Hint-bar glyphs now wear the driving controller's family (kit
Gamepad.styleFor by USB vendor id → MainActivity.lastPadStyle, kept live by
real input like lastPadIsGamepad): PlayStation pads get Canvas-drawn
cross/circle/square/triangle shapes in the classic colours, Nintendo pads
monochrome lettering, Xbox/Valve/unknown the coloured letter discs. Hint
chars stay semantic (KEYCODE_BUTTON names); only the rendering changes.
- The Options legend renders the pad's real Select-family button
(SelectButtonGlyph): Xbox View windows, PlayStation Create capsule,
Nintendo minus — instead of a bare capsule outline.
- GamepadDialog: body + action stack scroll together (title pinned) with
BringIntoViewRequester keeping the focused button visible — a 5-action host
options dialog compressed/clipped its last button in short landscape
windows because the pinned stack could not scroll.
- Console form polish: shared animateConsoleFocus (bg/border cross-fade +
spring scale) across settings rows / add-host fields / action rows;
ConsoleSwitch (spring knob, tinting track) replaces On/Off text on toggle
rows; choice values slide in the direction they were stepped
(AnimatedContent + SizeTransform) with chevrons that fade in place; the
focused row's detail unfolds via AnimatedVisibility; dialog buttons and
keyboard keycaps cross-fade (keycaps at 90 ms for hold-to-repeat).
- Console settings gain the "Low-latency mode" (Video) and "Auto-wake on
connect" (Interface) rows, round-tripping with the touch settings.
- Screenshot scene: StatsOverlay call updated to the 18-double layout + the
new decoderLabel parameter (fixes the android-screenshots CI compile).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Ctrl+Alt+Shift+Q/D handlers had no tracing, so a report of "the
disconnect shortcut doesn't work" was unverifiable from logs alone —
live tracing (added temporarily, then trimmed to these two lines)
showed the chord, `disconnect_quit()`, and the session teardown all
firing correctly and instantly every time; the confusion traced back
to the (now-fixed) FlowBox click crash having kept everyone from ever
reaching a live session to test the shortcut with in the first place.
Keep the two low-noise, deliberate-action log lines for the next time
this comes up; drop the per-keystroke debug trace used to diagnose it,
which would otherwise fire on every key during a stream.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
`child-activated` (fired by a pointer click) was bridged to `child.activate()`
so each card's own connect handler (wired on the child's `activate` signal)
would run. But `child.activate()` runs `GtkFlowBoxChild`'s default handler,
which re-emits `child-activated` on the FlowBox — bouncing straight back into
the same closure. Unguarded, that ping-pong recursed forever, overflowing the
stack on every single host-card click or Enter-key activation (confirmed live
via coredump/gdb: 43k+ stack frames of gobject signal emission, and the
`fatal runtime error: stack overflow, aborting` in the crash log).
A re-entrancy flag breaks the cycle after the one real activation. Added a
regression test that wires the identical FlowBox/FlowBoxChild signal cycle
against a real display and asserts it returns instead of recursing — it
reproduces the exact stack overflow against the old code.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The 5dc24a0 low-latency overhaul regressed badly on some phones. Every piece
of it — decoder ranking, per-SoC vendor keys, the async decode loop, pipeline
thread boosts, the ADPF max-performance bias, game-tagged AAudio, DSCP marking,
the Wi-Fi low-latency lock, HDMI ALLM and the forced TV mode switch — now rides
the "Low-latency mode (experimental)" toggle, default OFF. Off restores the
pre-overhaul pipeline byte-for-byte: the sync poll loop, the platform-default
decoder, and the original format keys (standard low-latency + blind Qualcomm
twin + priority=0 + operating-rate=MAX together).
- New pref key (low_latency_mode_experimental): the old key shipped default-ON,
so any install that ever saved settings persisted true — flipping the default
under the old key would leave exactly the regressed devices stuck on.
- DSCP is applied at socket creation, so the toggle reaches the transport via
NativeBridge.nativeSetLowLatencyMode → transport::set_dscp_default, called in
the connect choke point before nativeConnect; the core DSCP default reverts
to off everywhere.
- nativeStartAudio(handle, lowLatencyMode) gates AAudio usage=Game.
- VideoDecoders.pickDecoder now skips `.secure` decoder twins and decoders that
require FEATURE_SecurePlayback: they need a secure surface, and a secure twin
could out-score its plain sibling (only it advertising FEATURE_LowLatency),
which black-screens a clear stream.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
An mDNS discovery miss was forcing connects through the Wake-on-LAN wait
even for a host that's already up; add a Settings toggle ("Auto-wake on
connect") that skips the mDNS-liveness gate and dials straight through
when off.
Also default the console UI's button glyphs by form factor instead of
always starting in TV-remote style: a phone/tablet only ever enters the
console UI via a real controller, so it should show gamepad glyphs from
the first frame, not a remote's select/back glyphs. TV keeps the remote
default.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
`build_ui` (the GTK `activate` handler) started a fresh SDL3 gamepad
worker thread on every reactivation of the already-running singleton
(another --connect, the launcher clicked twice, ...). sdl3 only lets
the first thread ever to call sdl3::init() hold "main thread" status,
so every later activation's worker thread failed permanently with
"Cannot initialize `Sdl` from a thread other than the main thread",
silently disabling controller support for the rest of the process.
Start the GamepadService once in run() and clone it into build_ui
instead of starting a new one per activation.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Modifier keys arrive only as flagsChanged, and the direction was recovered
by diffing the device-dependent L/R bits (NX_DEVICE*KEYMASK) alone. Those
bits are undocumented and some keyboards omit them (only the class bit,
e.g. NX_CONTROLMASK, is set), so the diff saw no transition and the key
never reached the host — no Ctrl shortcuts. SDL/Moonlight key off the
event's keyCode for exactly this reason; do the same: keyCode names the
changed key, the class bit says up, the device bits (when present) pick
the side, and a tracked-held-state flip covers keyboards without them.
PUNKTFUNK_INPUT_DEBUG=1 now also logs every flagsChanged (keyCode + raw
flags) so a field report is diagnosable from client logs.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Like the Linux client, the Windows client had WOL send + MAC storage + a Wake
action + fire-and-forget auto-wake, but no poll-until-up + IP re-key. Add the
polished flow (mirrors Apple HostWaker + the request_access screen pattern):
- connect::wake_and_connect — send the magic packet, show a cancelable
Screen::Waking busy page, poll discovery::browse() until the host reappears
(re-sending every 6 s, 90 s budget), then dial; re-key the saved host
(KnownHosts::upsert) if it woke on a new IP.
- Screen::Waking + waking_page, routed in app/mod.rs (mirrors RequestAccess).
- the saved-host tile routes an offline-with-MAC tap to wake_and_connect;
MENU_WAKE stays a pure send-only button.
Reviewed against the request_access reference — DiscoveredHost/KnownHost/Target
types, the widgets, .call()/.lock(), and the initiate signature all match;
compile-verified by Windows CI (no local Windows toolchain).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Linux client already had WOL send + MAC storage + a Wake action + auto-wake-
on-connect, but the auto-wake just fired a packet and did one dial to the stored
address — so a host that woke on a new DHCP lease failed, and there was no
"waiting" feedback. Add the polished flow (mirrors Apple/Android HostWaker):
- ui_trust::wake_and_connect — send the magic packet, poll mDNS until the host
reappears (re-sending every 6 s, 90 s budget) behind a cancelable "Waking…"
dialog, then connect; if it woke on a new IP, re-key the saved host first.
- trust::rekey_addr — no-churn addr/port update keyed by fingerprint.
- the hosts page routes an offline saved-host-with-MAC tap to on_wake_connect
(the new flow) instead of fire-and-forget wake + immediate dial.
Builds + clippy + fmt clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The core's deliberate-quit close (NativeClient::disconnect_quit → QUIT_CLOSE_CODE,
host skips the keep-alive linger) was implemented but never called by any client.
Wire it to each client's explicit user-disconnect action — NOT to a network drop /
host-ended / app-background (those keep the linger for a reconnect):
- core: new C-ABI punktfunk_connection_disconnect_quit(c) for the ABI clients
- Linux (direct-core): Ctrl+Alt+Shift+D + the controller escape chord
- Windows (direct-core): Ctrl+Alt+Shift+D
- Apple (C-ABI): PunktfunkConnection.disconnectQuit() + a `deliberate` flag on
SessionModel.disconnect() (sessionEnded passes false → keeps the linger)
- Android (JNI): new nativeDisconnectQuit export, called from the back gesture +
the Select+Start+L1+R1 chord (not the host-gone watchdog)
- probe already did this via --quit (77871d6)
Verified: core + Linux client + Android (cargo-ndk + gradle) build clean;
Windows/Apple compile-checked by CI.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The library browser was browse-only — the A button (and a tap) did nothing.
Wire it to connect + boot straight into the selected title: thread a `launch`
id (the store-qualified library id `steam:<appid>` / `custom:<id>`) through
nativeConnect → NativeClient's Hello.launch (was hardcoded None), add a shared
connectToHost() the ConnectScreen and the library launcher both use, and have
LibraryScreen dial the host with launch=game.id on A / tap — with a launching
overlay + an "A Launch" hint. Verified: native compiles (cargo-ndk arm64),
app+kit Kotlin compiles (gradle, 3 ABIs).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Close the latency gap on the Android client with per-SoC decoder tuning, an
event-driven decode loop, and full system integration.
- Decoder selection: rank MediaCodecList decoders in Kotlin (hardware/vendor
preferred, software avoided, FEATURE_LowLatency probed) and create the chosen
one by name. Per-SoC low-latency keys gated on the codec-name prefix: Qualcomm
picture-order + low-latency, Exynos (also Google Tensor), Amlogic, HiSilicon;
MediaTek vdec-lowlatency set unconditionally. operating-rate = MAX (Qualcomm)
vs priority = 0 (else) are mutually exclusive. NVIDIA/Rockchip/Realtek have no
vendor key — covered by ranking + the standard low-latency key.
- Async decode loop: AMediaCodec async-notify replaces the poll loop, presenting a
decoded frame the instant it is ready instead of waiting out a poll interval.
Behind USE_ASYNC_DECODE with the synchronous loop kept for A/B during bring-up.
- System integration: Wi-Fi FULL_LOW_LATENCY lock and HDMI ALLM
(setPreferMinimalPostProcessing) for the stream's lifetime; game_mode_config.xml
opting out of OEM downscaling / FPS overrides.
- Pipeline: boost the data-plane pump + audio thread priorities, AAudio usage=Game,
DSCP marking on by default on Android, ADPF setPreferPowerEfficiency(false),
and setFrameRateWithChangeStrategy(ALWAYS) to force the HDMI mode switch on TV.
- lowLatencyMode master toggle (default on) as the escape hatch; the stats HUD now
shows the resolved decoder name.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- HostWaker + WakeOverlay: after sending the Wake-on-LAN packet, wait until the host
is really back (resend + mDNS poll, timeout, cancel/retry) before connecting.
macOS-only in practice — WoL stays gated off on iOS/tvOS pending the multicast
entitlement.
- Add/Edit host sheet gains a Wake-on-LAN MAC field, prefilled from the stored MAC
or the live mDNS advert; parseMacs validates aa:bb:cc:dd:ee:ff.
- Gamepad chrome/home and glass-style polish.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bring the Android client to parity with Apple's gamepad experience and finish
Wake-on-LAN.
- Console/gamepad home: host carousel, aurora chrome, mTLS game-library coverflow,
and an input-aware legend that switches between gamepad face buttons and a
TV-remote select-ring + arrows based on the last-used input.
- Wake-on-LAN: the fire-and-forget send is upgraded to wait-until-up
(WakeController/WakeOverlay: resend + mDNS poll, 90s timeout, cancel/retry,
fingerprint-matched so a host that cold-boots onto a new DHCP IP still connects),
plus host edit (touch dialog + console form) with an auto-filled MAC.
- Android TV: brand banner (android:banner), density-aware console scaling, D-pad/
remote nav (Up = Settings, Down or the pad Select button = host Options),
emergency stream-exit chord, and 120Hz console refresh.
- Touch UI: settings split into subpages with a tablet NavigationRail, axis-aware
tab animation (horizontal on phones, vertical on the tablet rail), animated
settings navigation, and a licenses screen with a back button + the real
workspace version (read from Cargo.toml).
- Vector Lock/controller icons (no emoji); bundled Geist font.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two probe test-infra fixes needed to validate the keep-alive hardening (e8531a9) on glass:
- `--seconds N` caps the receive loop (was a hardcoded 120s), so a probe against a live `serve`
host ends its session promptly and reaches the graceful `conn.close`.
- After `conn.close`, wait for the endpoint to flush the CONNECTION_CLOSE frame (bounded 2s)
before exiting — otherwise the process drops the endpoint before quinn sends the close, and the
host waits out the idle timeout instead of seeing the close CODE (which the `--quit` deliberate-
quit path and normal code-0 close both depend on).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On-glass testing (Test 2, KWin .116) surfaced that a reconnect within the QUIC idle-timeout
window (~8s) lands on a fresh SECOND display instead of reusing the kept one: the old session
was still Active (not yet Lingering), so the registry's keep-alive reuse (which only matches
Lingering) skipped it and the old session kept streaming to nobody. Three fixes:
#3 Same-client reconnect preempt (the real fix): admission::preempt_same_identity() lists a
reconnecting client's OWN still-live session(s) (same cert fingerprint); serve_session signals
their stop + waits the release grace BEFORE acquiring, so the zombie tears down → its display
lingers → the reconnect REUSES it instead of making a second. Implements the "preempts
downstream" the admission docs already promised. Independent of the mode_conflict policy; the
pure core (same_identity_stops) is unit-tested.
#2 Deliberate quit skips linger: a client that deliberately disconnects closes the QUIC connection
with QUIT_CLOSE_CODE (0x51, shared in core::quic); the host reads the ApplicationClosed reason
and tears the display down immediately (registry release() gained force_immediate →
Linger::Immediate; multi-session-safe via the pure lifecycle machine), while a bare disconnect
still lingers for reconnect. Threaded via a session quit flag → the DisplayLease.
NativeClient::disconnect_quit() + punktfunk-probe --quit drive it; GameStream (Quit App /
h_cancel) is a documented follow-up.
#1 Configurable disconnect-detection latency: the QUIC control-connection idle timeout
(stream_transport, 8s default) is host-tunable via --idle-timeout-ms / PUNKTFUNK_IDLE_TIMEOUT_MS,
clamped >=1s with a keep-alive that scales to it so a live session never false-closes. Default
unchanged (8s stays load-bearing for the Windows IDD-push reconnect flow).
Workspace check + 63 core / 215 host / 47 vdisplay tests green; clippy clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
App Review declined 0.4.2 (3384) under guideline 2.4.5(i): the temporary
com.apple.security.temporary-exception.mach-lookup.global-name =
com.apple.audioanalyticsd exception "is not appropriate and will not be
granted." It had been added on the theory that CoreHaptics controller
rumble (RumbleRenderer / MenuHaptics) hard-crashes under the App Sandbox
without it, since the framework reaches the audio-analytics daemon over
Mach and the sandbox denies that global-name lookup.
Tested the theory directly on macOS with a real Xbox pad: a
CHHapticEngine start + full-intensity rumble in a genuinely enforced
sandbox (NSHomeDirectory redirected into the app container) with no
exception on the codesigned binary runs fine — no crash — even with a
live AVAudioEngine stream running concurrently. CoreHaptics tolerates
the denied lookup; the exception was never load-bearing.
So just remove it: CoreHaptics session rumble and menu haptics keep
working on macOS unchanged (no source change needed). DualSense stays on
its raw-HID path — a genuine Sony-motor gap — which needs no exception
either.
Resubmit requires a new build number and clearing the App Store Connect
App Sandbox entitlement-usage justification for this exception.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Every other distro has a full Host Setup page; Arch only had table rows. Add
docs/arch.md (signed pacman binary repo: key import + repo + install, GPU
prereqs, service/linger, web console, client, PKGBUILD appendix), slot it into
the nav after fedora-kde, and point the install/client tables at it. Update the
client-install rows from 'from the PKGBUILD' to the binary repo now that it exists.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The KHR variant reads 32-bit attrib pairs; the pointer-sized array fed it
garbage and every plane import came back rejected (observed on-Deck; the
new fallback ladder caught it and demoted to software exactly as designed).
Also print the real EGL error enum instead of its discriminant.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
ABI_VERSION was doing double duty: the embeddable C surface AND the punktfunk/1
Hello/Welcome version that hosts equality-check. The WoL feature's v3 bump added
a client-local FFI function without changing a single wire byte — and every new
client started refusing against every deployed host ("ABI mismatch: client 3
host 2", observed live Deck → Bazzite). The wire now carries its own
WIRE_VERSION (still 2); ABI_VERSION stays 3 for the C header and the mgmt API's
informational field. Bump WIRE_VERSION only when the handshake/planes actually
change incompatibly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Wake-on-LAN batch landed with lints that fail `clippy -D warnings`
(doc continuation, char-array split, io::Error::other, redundant closure)
and an ungated `mod wol;` in the Windows client, which pulls windows-only
crates into the non-Windows stub build.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
VAAPI decode stays; what changes is who touches the YUV. The direct path hands
the NV12 dmabuf (tiled AMD modifier since Mesa 25.1) to GdkDmabufTexture, and
GTK's tiled-NV12 import renders corrupt/gray/washed-out on the Deck. Moonlight
and mpv are clean on the same box because they import the dmabuf into their own
EGL context and convert with their own shader — video_gl.rs is that
architecture for the GTK client: per-plane EGLImages (R8 + GR88, modifier
passed through) → our YUV→RGB shader (matrix/range from the stream's CICP
signaling, unit-tested) → RGBA texture in a GdkGLContext-shared context →
fence-synced GdkGLTexture. GTK composites plain RGBA; no YUV negotiation, no
compositor CSC.
The Deck's decoder default flips back to hardware (the software stopgap is
gone); desktops keep the direct dmabuf path (offload/scan-out eligible).
PUNKTFUNK_PRESENT=direct|gl overrides either way. New failure ladder: GL
converter init failure or a convert-error streak raises a shared flag and the
session pump demotes the decoder to software with a keyframe re-request — the
same mechanism also closes the old silent-black-screen gap where a rejected
dmabuf import had no recovery at all.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Each client learns a host's MAC from the mDNS `mac` TXT while it's awake, persists it on the saved-host record, and — when reconnecting to an offline host — sends a magic packet before connecting, plus an explicit "Wake host" action. Apple wraps the C-ABI; linux/windows call the core fn directly (linux also gains a --wake CLI mode); android via a new nativeWakeOnLan JNI export (the mDNS browse record gains a 7th mac field); decky shells out to the linux client's --wake before launching the stream.
iOS/tvOS need the managed com.apple.developer.networking.multicast entitlement (pending Apple approval), so the wake path + UI are gated off via PunktfunkConnection.wakeOnLANAvailable and the entitlement is commented out — keeping iOS/tvOS releasable. MAC-learning stays active on every platform so it lights up the moment it's ungated. macOS works today.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
macOS reserves the controller Home/PS and Share/Create buttons for its own system gestures and never delivers them to the app unless it declares the Game Controllers capability. Add GCSupportsControllerUserInteraction=YES to the macOS target only (iOS/tvOS rely on the focus engine, so it must not be in the shared plist), alongside the existing preferredSystemGestureState=.disabled.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
enricobuehler