fix(client/net): split the receipt stamp from the pull + bleed standing latency

The two-pair investigation (wired Mac clients stuck at a rock-steady
~18-19 ms "network" that survived the load ending and cleared only on
reconnect) exposed two structural gaps, one of measurement and one of
recovery:

- Receipt was stamped at the hand-off PULL (Swift nextAU, pf-client-core,
  Android decode loops), not at reassembly completion — so any client-side
  standing state between the reassembler and the pull read as NETWORK
  latency, undiagnosable from the HUD. ABI v9: `PunktfunkFrame`/`Frame`
  grow `received_ns`, stamped by `Session::poll_frame` as the AU crosses
  the session boundary. Every embedder now uses the core stamp; the Apple
  client keeps the pull instant as `AccessUnit.pulledNs` and shows the
  receipt→pull wait as its own "client queue" term (detailed HUD tier from
  2 ms + a `queue_p50` stats-log field). Decode stages keep their pull
  anchor on all platforms, so no historical stage shifts meaning.

- The jump-to-live detectors deliberately ignore anything under 6 queued
  frames / 400 ms behind — so a small, constant, loss-free elevation (a
  sub-frame standing backlog, or a stale clock offset after a wall-clock
  step/slew) is carried for the rest of the session. New third detector
  (`StandingLatency`, unit-tested ladder): window-MIN one-way delay
  ≥ 10 ms above the session floor with zero loss for ~4.5 s escalates
  gently — a free clock re-sync first (an applied re-sync re-bases the
  floor), then at most 3 flush+keyframe bleeds sharing the jump-to-live
  cooldown, then a loud disarm naming what it means. Loss windows reset
  the run: congestion belongs to FEC/ABR, not this detector.

Also: mid-stream re-sync apply/discard logs debug→info — they are the
forensic trail for the stale-offset case and were invisible in the field.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

clients/android/native/src/decode/async_loop.rs

@@ -404,7 +404,14 @@ fn feeder_loop(
                 // stage is consumed: the HUD, or the ABR decode signal (`measure_decode`). The
                 // HUD-only `received` point + host/network split stay gated on the overlay.
                 if stats.enabled() || measure_decode {
-                    let received_ns = now_realtime_ns();
+                    // Core reassembly-completion stamp (ABI v9), NOT the pull instant: stamping
+                    // here would fold the hand-off queue wait into the network latency figure
+                    // (a client-side standing backlog masquerading as network). 0 = older core.
+                    let received_ns = if frame.received_ns > 0 {
+                        frame.received_ns as i128
+                    } else {
+                        now_realtime_ns()
+                    };
                     {
                         let mut g = in_flight
                             .lock()

clients/android/native/src/decode/sync_loop.rs

@@ -221,7 +221,13 @@ pub(super) fn run_sync(
                     // samplers (`received` point, host/network split) stay gated on the overlay so
                     // the hidden steady state adds only a wall-clock read + the receipt push.
                     if stats.enabled() || measure_decode {
-                        let received_ns = now_realtime_ns();
+                        // Core reassembly-completion stamp (ABI v9), not the pull instant — see
+                        // async_loop: a pull stamp folds hand-off queue wait into "network".
+                        let received_ns = if frame.received_ns > 0 {
+                            frame.received_ns as i128
+                        } else {
+                            now_realtime_ns()
+                        };
                         in_flight.push_back((frame.pts_ns / 1000, received_ns));
                         if in_flight.len() > IN_FLIGHT_CAP {
                             in_flight.pop_front(); // stale — codec never echoed it back

clients/apple/Sources/PunktfunkClient/ContentView.swift

@@ -579,13 +579,21 @@ struct ContentView: View {
                         model?.disconnect() // the captured-state ⌃⌥⇧D combo
                     },
                     onFrame: { [meter = model.meter, latency = model.latency,
-                                split = model.latencySplit, offset = conn.clockOffsetNs] au in
+                                split = model.latencySplit, queue = model.clientQueue,
+                                offset = conn.clockOffsetNs] au in
                         meter.note(byteCount: au.data.count)
                         latency.record(ptsNs: au.ptsNs, offsetNs: offset)
                         // The same receipt, keyed by pts, awaiting its 0xCF host timing (the
-                        // host/network split — drained by the 1 s stats tick).
+                        // host/network split — drained by the 1 s stats tick). receivedNs is
+                        // the core's reassembly stamp (ABI v9), so the split's network term no
+                        // longer contains the client-queue wait...
                         split.recordReceipt(
                             ptsNs: au.ptsNs, receivedNs: au.receivedNs, offsetNs: offset)
+                        // ...which is measured as its own term instead (receipt→pull, both
+                        // client-local).
+                        queue.record(
+                            ptsNs: UInt64(bitPattern: au.receivedNs), atNs: au.pulledNs,
+                            offsetNs: 0)
                     },
                     onSessionEnd: { [weak model] in
                         Task { @MainActor in model?.sessionEnded() }

clients/apple/Sources/PunktfunkClient/Session/SessionModel.swift

@@ -102,6 +102,12 @@ final class SessionModel: ObservableObject {
     @Published var decodeValid = false
     @Published var displayP50Ms = 0.0
     @Published var displayValid = false
+    /// Client-queue wait: core reassembly receipt → the pump's pull (`AccessUnit.pulledNs −
+    /// receivedNs`, ABI v9 receipt split — the 2026-07 two-pair investigation). ~0 on a healthy
+    /// stream; a persistent value is a client-side standing backlog that used to hide inside
+    /// "network". Shown in the detailed tier only when it says something (≥ ~2 ms).
+    @Published var clientQueueP50Ms = 0.0
+    @Published var clientQueueValid = false
     /// The measured OS present floor (design/apple-presentation-rebuild.md): the deadline
     /// engine's vend→glass pipeline depth — an OS property no client can pace under (~2 refresh
     /// intervals composited; would read ~1 under direct-to-display). The HUD subtracts it from
@@ -147,6 +153,9 @@ final class SessionModel: ObservableObject {
     let endToEnd = LatencyMeter()
     let decodeStage = LatencyMeter()
     let displayStage = LatencyMeter()
+    /// Client-queue sampler (see `clientQueueP50Ms`) — fed per AU by the stream view's onFrame,
+    /// drained by the same 1 s tick as the stage meters.
+    let clientQueue = LatencyMeter()
     /// The OS present floor sampler (see `osFloorP50Ms`) — fed one sample per display-link
     /// update by the deadline engine, drained by the same 1 s tick as the stage meters.
     let presentFloor = LatencyMeter()
@@ -489,6 +498,7 @@ final class SessionModel: ObservableObject {
         endToEndValid = false
         decodeValid = false
         displayValid = false
+        clientQueueValid = false
         osFloorValid = false
         lostFrames = 0
         lostPct = 0
@@ -679,6 +689,12 @@ final class SessionModel: ObservableObject {
                 } else {
                     self.osFloorValid = false
                 }
+                if let q = self.clientQueue.drain() {
+                    self.clientQueueP50Ms = q.p50Ms
+                    self.clientQueueValid = true
+                } else {
+                    self.clientQueueValid = false
+                }
                 // Mirror the window to the unified log (see statsLog) — one line per second,
                 // stages in ms, only while frames actually flowed. `fps` counts RECEIVED AUs;
                 // `presents` counts frames that reached glass (the display meter's sample count)
@@ -691,7 +707,7 @@ final class SessionModel: ObservableObject {
                     let line = String(
                         format: "fps=%d presents=%d e2e_p50=%.1f e2e_p95=%.1f hostnet_p50=%.1f "
                             + "decode_p50=%.1f display_p50=%.1f lost=%d "
-                            + "floor_p50=%.1f display_adj=%.1f e2e_adj=%.1f",
+                            + "floor_p50=%.1f display_adj=%.1f e2e_adj=%.1f queue_p50=%.1f",
                         frames,
                         displayWindow?.count ?? 0,
                         self.endToEndValid ? self.endToEndP50Ms : -1,
@@ -702,7 +718,8 @@ final class SessionModel: ObservableObject {
                         lost,
                         self.osFloorValid ? self.osFloorP50Ms : -1,
                         self.displayValid ? self.displayAdjP50Ms : -1,
-                        self.endToEndValid ? self.endToEndAdjP50Ms : -1)
+                        self.endToEndValid ? self.endToEndAdjP50Ms : -1,
+                        self.clientQueueValid ? self.clientQueueP50Ms : -1)
                     statsLog.info("\(line, privacy: .public)")
                 }
             }

clients/apple/Sources/PunktfunkClient/Session/StreamHUDView.swift

@@ -118,6 +118,16 @@ struct StreamHUDView: View {
                             .font(.system(.caption2, design: .monospaced))
                             .foregroundStyle(.tertiary)
                     }
+                    // Client-queue wait (reassembly receipt → decode pull, ABI v9 split): ~0 on
+                    // a healthy stream and hidden as noise; shown from 2 ms — a persistent value
+                    // is a client-side standing backlog that pre-split builds displayed as
+                    // "network" (the 2026-07 two-pair plateau). The core's standing-latency
+                    // bleed logs alongside when it acts on the same state.
+                    if model.clientQueueValid && model.clientQueueP50Ms >= 2 {
+                        Text("client queue +\(model.clientQueueP50Ms, specifier: "%.1f") (receive backlog — standing if it persists)")
+                            .font(.system(.caption2, design: .monospaced))
+                            .foregroundStyle(.tertiary)
+                    }
                 }
             } else if model.hostNetworkValid {
                 // Stage-1 fallback presenter: the layer decodes + presents internally with no

clients/apple/Sources/PunktfunkKit/Connection/PunktfunkConnection.swift

@@ -35,10 +35,31 @@ public struct AccessUnit: Sendable {
     public let ptsNs: UInt64
     public let frameIndex: UInt32
     public let flags: UInt32
-    /// Client `CLOCK_REALTIME` instant the AU was handed over by the core (post-FEC, decrypted)
+    /// Client `CLOCK_REALTIME` instant the AU finished reassembly in the core (post-FEC,
-    /// — the **received** measurement point of design/stats-unification.md. The decode stage is
+    /// decrypted — `PunktfunkFrame.received_ns`, ABI v9) — the **received** measurement point of
-    /// `decodedNs - receivedNs`, both client-local (no skew offset applies).
+    /// design/stats-unification.md. NOT the pull instant: stamping at the pull folded the
+    /// pre-decode hand-off wait into the network term, which is how the 2026-07 two-pair
+    /// standing-latency plateau hid as "network". The decode stage is `decodedNs - receivedNs`,
+    /// both client-local (no skew offset applies).
     public let receivedNs: Int64
+    /// Client `CLOCK_REALTIME` instant this pull returned. `pulledNs - receivedNs` is the
+    /// client-queue wait (kernel hand-off + FrameChannel dwell) — the term the HUD splits out
+    /// so a client-side standing backlog can never masquerade as network latency again.
+    public let pulledNs: Int64
+
+    /// `pulledNs` defaults to `receivedNs` (zero queue wait) for callers with no pull instant —
+    /// the synthetic probe AUs and decode tests, where the split is meaningless.
+    public init(
+        data: Data, ptsNs: UInt64, frameIndex: UInt32, flags: UInt32,
+        receivedNs: Int64, pulledNs: Int64? = nil
+    ) {
+        self.data = data
+        self.ptsNs = ptsNs
+        self.frameIndex = frameIndex
+        self.flags = flags
+        self.receivedNs = receivedNs
+        self.pulledNs = pulledNs ?? receivedNs
+    }
 }
 
 /// One Opus audio packet (48 kHz stereo, 5 ms frames) — decode with AVAudioConverter
@@ -662,11 +683,16 @@ public final class PunktfunkConnection {
             let data = Data(bytes: base, count: Int(frame.len)) // copy: ptr valid only until next call
             var ts = timespec()
             clock_gettime(CLOCK_REALTIME, &ts)
-            let receivedNs = Int64(ts.tv_sec) * 1_000_000_000 + Int64(ts.tv_nsec)
+            let pulledNs = Int64(ts.tv_sec) * 1_000_000_000 + Int64(ts.tv_nsec)
+            // Receipt = the core's reassembly-completion stamp (ABI v9); the pull instant is
+            // kept separately so the client-queue wait is its own measured term. 0 would mean a
+            // pre-v9 core — impossible here (core and Kit ship in one binary), but fall back to
+            // the pull instant rather than record a 1970 receipt.
+            let receivedNs = frame.received_ns > 0 ? Int64(frame.received_ns) : pulledNs
             return AccessUnit(
                 data: data, ptsNs: frame.pts_ns,
                 frameIndex: frame.frame_index, flags: frame.flags,
-                receivedNs: receivedNs)
+                receivedNs: receivedNs, pulledNs: pulledNs)
         case statusNoFrame:
             return nil
         case statusClosed:

clients/apple/Sources/PunktfunkKit/Video/Stage2Pipeline.swift

@@ -1213,7 +1213,9 @@ public final class Stage2Pipeline {
                         let chunkAligned =
                             au.flags & PunktfunkConnection.userFlagChunkAligned != 0
                         let ptsNs = au.ptsNs
-                        let receivedNs = au.receivedNs
+                        // Decode stage starts at the PULL (matching the VT path's FrameContext —
+                        // receipt→pull is the HUD's separate client-queue term, ABI v9 split).
+                        let receivedNs = au.pulledNs
                         let flags = au.flags
                         let submitted = decoder.decode(
                             au: au.data, chunkAligned: chunkAligned, windowSize: windowSize

clients/apple/Sources/PunktfunkKit/Video/VideoDecoder.swift

@@ -32,9 +32,12 @@ public enum ReadyImage: @unchecked Sendable {
 public struct ReadyFrame: @unchecked Sendable {
     /// Host capture clock (the AU's pts), in nanoseconds.
     public let ptsNs: UInt64
-    /// Client `CLOCK_REALTIME` instant the AU was received (`AccessUnit.receivedNs`, threaded
+    /// Client `CLOCK_REALTIME` instant the AU left `nextAU` (`AccessUnit.pulledNs`, threaded
-    /// through the decode via the frame refcon), in nanoseconds. 0 when unknown (a caller that
+    /// through the decode via the frame refcon), in nanoseconds — the decode stage's start
-    /// didn't stamp receipt) — the decode-stage meter then drops the sample via its sanity guard.
+    /// point. (Named for its historical role; since the ABI v9 receipt split the true
+    /// reassembly receipt lives on `AccessUnit.receivedNs`, and receipt→pull is the HUD's own
+    /// client-queue term.) 0 when unknown (a caller that didn't stamp) — the decode-stage meter
+    /// then drops the sample via its sanity guard.
     public let receivedNs: Int64
     /// Client `CLOCK_REALTIME` instant decode completed, in nanoseconds.
     public let decodedNs: Int64
@@ -167,7 +170,11 @@ public final class VideoDecoder: @unchecked Sendable {
         var infoOut = VTDecodeInfoFlags()
         // The AU's receipt instant + wire flags ride through as a retained context; the output
         // callback reclaims it. Retain immediately before submit so no early return can leak it.
-        let ctx = FrameContext(receivedNs: au.receivedNs, flags: au.flags)
+        // The decode stage starts at the PULL (the AU leaving nextAU), not the reassembly
+        // receipt: both consumers — the decode-stage meter and the ABR decode signal — are
+        // specified from the pull, and the receipt→pull wait is the HUD's separate client-queue
+        // term (see AccessUnit.pulledNs).
+        let ctx = FrameContext(receivedNs: au.pulledNs, flags: au.flags)
         let refcon = Unmanaged.passRetained(ctx).toOpaque()
         let status = VTDecompressionSessionDecodeFrame(
             session,

clients/session/Cargo.toml

@@ -27,9 +27,13 @@ ui = ["dep:pf-console-ui", "dep:serde_json"]
 # Same Linux+Windows gating as the rest of the client stack; elsewhere this is a stub
 # binary.
 [target.'cfg(any(target_os = "linux", windows))'.dependencies]
-pf-presenter = { path = "../../crates/pf-presenter" }
+# `default-features = false` on both: THIS crate's `pyrowave` feature (above) is the single
+# switch that turns the wavelet codec on, and it enables it explicitly on each. Inheriting their
+# defaults instead would make `--no-default-features` a lie — the Windows ARM64 leg builds that
+# way precisely to skip the vendored PyroWave C++, which has no ARM64 SIMD path.
+pf-presenter = { path = "../../crates/pf-presenter", default-features = false }
 pf-console-ui = { path = "../../crates/pf-console-ui", optional = true }
-pf-client-core = { path = "../../crates/pf-client-core" }
+pf-client-core = { path = "../../crates/pf-client-core", default-features = false }
 punktfunk-core = { path = "../../crates/punktfunk-core", features = ["quic"] }
 # The fake-library dev hook (`PUNKTFUNK_FAKE_LIBRARY`, browse mode) parses GameEntry JSON.
 serde_json = { version = "1", optional = true }

clients/windows/Cargo.toml

@@ -29,7 +29,17 @@ punktfunk-core = { path = "../../crates/punktfunk-core", features = ["quic"] }
 # The shared client service layer: the trust/settings stores (ONE `Settings` struct for the
 # shell and the spawned session binary — src/trust.rs re-exports it) and the game-library
 # data model (fetch + art pipeline) behind the library page.
-pf-client-core = { path = "../../crates/pf-client-core" }
+#
+# `default-features = false` drops pf-client-core's default `pyrowave`, which would otherwise
+# build the vendored PyroWave C++ INTO THE SHELL — dead weight here (the shell never decodes;
+# it only offers "pyrowave" as a codec preference string the session binary acts on) and fatal
+# on ARM64, where Granite's math falls back to x86 SSE intrinsics and stops at
+# `simd.hpp: #error "Implement me."`. This does NOT drop PyroWave from the Windows client:
+# decode lives in the spawned punktfunk-session binary, whose own default enables the feature,
+# and cargo's feature unification turns it back on for the shared pf-client-core whenever that
+# binary is in the same build (x64). On the ARM64 leg both are built --no-default-features, so
+# nothing enables it and the C++ is never compiled.
+pf-client-core = { path = "../../crates/pf-client-core", default-features = false }
 
 # WinUI 3 UI via windows-reactor (a declarative React-like framework backed by WinUI). Its
 # `build.rs` downloads the Windows App SDK NuGets and stages the bootstrap DLL + resources.pri

clients/windows/packaging/AppxManifest.xml

@@ -59,9 +59,14 @@
     </Application>
     <!--
       Second entry point: the couch/console UI, for an HTPC or a TV-attached box where the
-      desktop shell is the wrong first screen. Same full-trust executable, launched with
+      desktop shell is the wrong first screen. Its own executable (punktfunk-console.exe)
-      `--console`, which hands straight off to the session binary's controller-driven
+      because an MSIX Application entry cannot pass arguments to a full-trust exe; it hands
-      browse mode (host list, pairing, settings, library) fullscreen.
+      straight off to the session binary's controller-driven browse mode (host list,
+      pairing, settings, library) fullscreen.
+
+      NOTE: never write a double hyphen in this file. XML forbids it inside a comment, and
+      makepri rejects the whole manifest ("Appx manifest not found or is invalid") — which
+      is exactly how the console flag spelled out here broke the v0.15.0 MSIX build.
     -->
     <Application Id="PunktfunkConsole" Executable="punktfunk-console.exe"
                  EntryPoint="Windows.FullTrustApplication">

crates/pf-client-core/src/session.rs

@@ -447,8 +447,16 @@ fn pump(
         // every ~8–16 ms at 60–120 Hz anyway, so this rarely times out mid-stream).
         match connector.next_frame(Duration::from_millis(20)) {
             Ok(frame) => {
-                // The `received` point: AU fully reassembled, in hand, before decode.
+                // The `received` point: reassembly COMPLETION, stamped by the core session as
-                let received_ns = now_ns();
+                // the AU crossed poll_frame (ABI v9). Stamping here at the hand-off pull instead
+                // would fold the pre-decode queue wait into `host+network` — a client-side
+                // standing backlog masquerading as network latency (the 2026-07 two-pair
+                // investigation). 0 = a core predating the stamp; fall back to the pull instant.
+                let received_ns = if frame.received_ns > 0 {
+                    frame.received_ns
+                } else {
+                    now_ns()
+                };
                 // fps / goodput count every received AU (spec), decoded or not.
                 frames_n += 1;
                 bytes_n += frame.data.len() as u64;

crates/pf-encode/src/enc/linux/vulkan_video.rs

@@ -1851,7 +1851,20 @@ impl VulkanVideoEncoder {
         let f = &self.frames[slot];
         let mut fb = [[0u32; 2]; 1];
         dev.get_query_pool_results(f.query_pool, 0, &mut fb, vk::QueryResultFlags::WAIT)?;
-        let (off, len) = (fb[0][0] as usize, fb[0][1] as usize);
+        // The (offset, bytes-written) pair is driver-reported: validate it against the bitstream
+        // allocation BEFORE mapping, or the `from_raw_parts` below reads outside the buffer and
+        // ships whatever it finds straight onto the wire. Checked in u64 so the add cannot wrap,
+        // and before `map_memory` so there is no unmap to unwind on the error path.
+        let (off64, len64) = (fb[0][0] as u64, fb[0][1] as u64);
+        if off64.saturating_add(len64) > self.bs_size {
+            anyhow::bail!(
+                "vulkan-encode: driver reported bitstream feedback offset={off64} \
+                 bytes_written={len64}, outside the {} byte bitstream buffer — the encode likely \
+                 overflowed its destination range",
+                self.bs_size
+            );
+        }
+        let (off, len) = (off64 as usize, len64 as usize);
         let p =
             dev.map_memory(f.bs_mem, 0, vk::WHOLE_SIZE, vk::MemoryMapFlags::empty())? as *const u8;
         let prefix: &[u8] = if f.keyframe {
@@ -1923,7 +1936,28 @@ impl Encoder for VulkanVideoEncoder {
         if first_frame < 0 || first_frame > last_frame {
             return false;
         }
+        // Taint sweep BEFORE picking the anchor (the fecbec2d fix AMF and QSV got; this backend was
+        // carved out one commit later and never received it). "Resident and older than THIS loss" is
+        // not the same as "the client decoded it": after an earlier loss [a,b] was recovered at wire
+        // r, everything in [a, r-1] is undecodable at the client — the lost frames plus every frame
+        // that predicted through the gap. Those wires stay valid anchor candidates here until the
+        // 8-slot ring rolls them out, so a LATER loss can anchor on one and ship corruption tagged
+        // `recovery_anchor` — which is the client's definitive re-anchor signal (reanchor.rs), so it
+        // lifts the post-loss freeze onto a picture built from a reference it never had.
+        //
+        // Blank `slot_wire` ONLY. `slot_poc` must keep naming every physically-resident DPB picture
+        // for `build_h265_rps_s0`, or a conforming decoder evicts them and the anchor references a
+        // picture the client already dropped. `slot_wire` is the RFI/loss domain; `slot_poc` is the
+        // reference-delta domain. `prev_slot` and the normal P-frame path are indices, not wires, so
+        // ordinary prediction is unaffected.
+        for w in self.slot_wire.iter_mut() {
+            if *w >= first_frame {
+                *w = -1;
+            }
+        }
         // Can we anchor a clean P-frame to a resident slot strictly older than the loss?
+        // (A sweep that empties every candidate yields `None` here and declines the RFI, matching
+        // `qsv_live_ltr_rfi_taint_sweep_declines`.)
         match pick_recovery_slot(&self.slot_wire, first_frame) {
             Some(_) => {
                 self.pending_loss = Some(first_frame);
@@ -2697,6 +2731,62 @@ mod tests {
         assert_eq!(pick_recovery_slot(&[-1; 8], 5), None);
     }
 
+    /// The taint sweep (fecbec2d's fix, ported here): a slot encoded inside an EARLIER, still
+    /// unrepaired loss window must not become the "known-good" anchor of a LATER loss. Without the
+    /// sweep, `pick_recovery_slot` accepts it — it is resident and its wire is below the second
+    /// loss start — and the frame ships tagged `recovery_anchor`, lifting the client's freeze onto
+    /// a reference it never decoded.
+    #[test]
+    fn taint_sweep_excludes_slots_from_an_earlier_loss() {
+        // Apply the sweep exactly as `invalidate_ref_frames` does.
+        fn sweep(wires: &mut [i64], loss_first: i64) {
+            for w in wires.iter_mut() {
+                if *w >= loss_first {
+                    *w = -1;
+                }
+            }
+        }
+
+        // Slots hold wires 0..7. Loss 1 starts at wire 4, so wires 4..7 are undecodable at the
+        // client. A second loss report arrives at wire 6 while they are all still resident.
+        let tainted = [4i64, 5, 6, 7];
+
+        // WITHOUT the sweep this is the bug: the newest wire below 6 is wire 5 — squarely inside
+        // loss 1's unrepaired window — and it would be served as the "known-good" anchor.
+        let unswept = [0i64, 1, 2, 3, 4, 5, 6, 7];
+        let picked = pick_recovery_slot(&unswept, 6).expect("unswept picks something");
+        assert!(
+            tainted.contains(&unswept[picked]),
+            "precondition: without the sweep the anchor comes from the earlier loss window"
+        );
+
+        // WITH the sweep, loss 1 blanks 4..7, so loss 2 can only reach genuinely clean wires.
+        let mut wires = unswept;
+        sweep(&mut wires, 4);
+        assert_eq!(wires, [0, 1, 2, 3, -1, -1, -1, -1]);
+        let picked = pick_recovery_slot(&wires, 6).expect("clean wires remain");
+        assert_eq!(picked, 3, "newest clean survivor is wire 3");
+        assert!(!tainted.contains(&wires[picked]));
+
+        // Encoding resumes after recovery; wires 8..11 refill the swept slots and are clean. A
+        // later loss at wire 10 legitimately anchors on wire 9 — the sweep must not over-reject.
+        wires[4] = 8;
+        wires[5] = 9;
+        wires[6] = 10;
+        wires[7] = 11;
+        sweep(&mut wires, 10);
+        assert_eq!(
+            pick_recovery_slot(&wires, 10),
+            Some(5),
+            "wire 9 is post-recovery, clean"
+        );
+
+        // A loss covering every live wire leaves nothing clean → decline, caller serves an IDR.
+        let mut all = [5i64, 6, 7, 8, 9, 10, 11, 12];
+        sweep(&mut all, 5);
+        assert_eq!(pick_recovery_slot(&all, 5), None);
+    }
+
     /// The full-retention RPS: every resident picture is listed (so the decoder keeps it), the
     /// setup slot's dying occupant is not, and `used_by_curr_pic` marks exactly the real reference.
     #[test]

crates/pf-encode/src/enc/windows/qsv.rs

@@ -714,7 +714,16 @@ pub struct QsvEncoder {
     /// `EncoderCaps::supports_rfi` and all per-frame marking/forcing below.
     ltr_active: bool,
     /// The wire frame index stored in each LTR slot (`None` = never marked).
+    ///
+    /// This mirrors the HARDWARE DPB, so an entry must not be cleared merely because we distrust
+    /// it: nulling issues no VPL call, and the encoder keeps the frame marked long-term until that
+    /// `LongTermIdx` is re-marked or an IDR flushes it. Distrust is recorded in `ltr_tainted`
+    /// instead, so the rejection list can still NAME the entry the hardware is holding.
     ltr_slots: [Option<i64>; NUM_LTR_SLOTS],
+    /// Per-slot taint from `invalidate_ref_frames`' sweep: the mark is still live in the hardware
+    /// DPB but was encoded inside the client's corrupt window, so it may not anchor a recovery —
+    /// it must be REJECTED instead. Cleared wherever the slot is re-marked or the DPB is flushed.
+    ltr_tainted: [bool; NUM_LTR_SLOTS],
     next_ltr_slot: usize,
     ltr_mark_interval: i64,
     /// Set by `invalidate_ref_frames`: the slot the next submitted frame force-references.
@@ -789,6 +798,7 @@ impl QsvEncoder {
             ir_active: false,
             ltr_active: false,
             ltr_slots: [None; NUM_LTR_SLOTS],
+            ltr_tainted: [false; NUM_LTR_SLOTS],
             next_ltr_slot: 0,
             ltr_mark_interval: ltr_mark_interval(fps),
             pending_force: None,
@@ -913,6 +923,7 @@ impl QsvEncoder {
         self.ltr_active = ltr_active;
         self.ir_active = ir_active;
         self.ltr_slots = [None; NUM_LTR_SLOTS];
+        self.ltr_tainted = [false; NUM_LTR_SLOTS];
         self.next_ltr_slot = 0;
         self.pending_force = None;
         self.hdr_applied = self.hdr_meta;
@@ -1038,6 +1049,7 @@ impl Encoder for QsvEncoder {
                 // An IDR voids the decoder's reference buffers — drop stale slots and any
                 // queued force; the mark cadence below re-anchors on the IDR itself.
                 self.ltr_slots = [None; NUM_LTR_SLOTS];
+                self.ltr_tainted = [false; NUM_LTR_SLOTS]; // the IDR flushed the DPB with them
                 self.next_ltr_slot = 0;
                 self.pending_force = None;
             } else if self.ltr_test_force_at == Some(cur_idx) {
@@ -1053,7 +1065,9 @@ impl Encoder for QsvEncoder {
                 // emptied the slot since the force was queued. An empty slot means there is
                 // nothing clean to re-reference — the frame must ship as a plain P WITHOUT the
                 // `recovery_anchor` tag (the client lifts its post-loss freeze on that tag).
-                if let Some(idx) = self.ltr_slots[slot] {
+                // The slot is no longer emptied by the sweep, so test the taint flag too — a
+                // tainted slot is exactly the "nothing clean to re-reference" case.
+                if let Some(idx) = self.ltr_slots[slot].filter(|_| !self.ltr_tainted[slot]) {
                     force_ltr = Some((slot, idx));
                     recovery_anchor = true;
                 }
@@ -1061,6 +1075,9 @@ impl Encoder for QsvEncoder {
             if force_ltr.is_none() && (forced || cur_idx % self.ltr_mark_interval == 0) {
                 let slot = self.next_ltr_slot;
                 self.ltr_slots[slot] = Some(cur_idx);
+                // Re-marking replaces the hardware's LongTermIdx: the tainted frame is gone from
+                // the DPB and this slot is clean again.
+                self.ltr_tainted[slot] = false;
                 self.next_ltr_slot = (self.next_ltr_slot + 1) % NUM_LTR_SLOTS;
                 mark_slot = Some(slot);
             }
@@ -1323,13 +1340,23 @@ impl Encoder for QsvEncoder {
         // loss ships corruption as the recovery anchor, and every subsequent mark re-samples
         // the soup — the sustained-loss field failure where the picture never healed. Dropped
         // slots stay dropped; the cadence re-marks a clean frame within ~1/4 s.
-        for marked in self.ltr_slots.iter_mut() {
+        //
+        // Mark tainted rather than clearing: `ltr_slots` mirrors the HARDWARE DPB, and nulling an
+        // entry issues no VPL call — the frame stays marked long-term in the encoder. Clearing it
+        // made the rejection list below (which iterates the post-sweep mirror and only names `Some`
+        // slots) silently SKIP the one entry the sweep exists to distrust, so the recovery frame
+        // could still predict from it. With two slots the "exactly one swept" case is the modal
+        // one, and it was the broken one.
+        for (slot, marked) in self.ltr_slots.iter().enumerate() {
             if marked.is_some_and(|idx| idx >= first) {
-                *marked = None;
+                self.ltr_tainted[slot] = true;
             }
         }
         let mut best: Option<(usize, i64)> = None;
         for (slot, marked) in self.ltr_slots.iter().enumerate() {
+            if self.ltr_tainted[slot] {
+                continue; // still in the DPB, but encoded inside the corrupt window
+            }
             if let Some(idx) = *marked {
                 if idx < first && best.is_none_or(|(_, b)| idx > b) {
                     best = Some((slot, idx));
@@ -1454,6 +1481,7 @@ impl Encoder for QsvEncoder {
                 self.ltr_active = ltr;
                 self.ir_active = ir;
                 self.ltr_slots = [None; NUM_LTR_SLOTS];
+                self.ltr_tainted = [false; NUM_LTR_SLOTS];
                 self.next_ltr_slot = 0;
                 self.pending_force = None;
                 if let Some(inner) = self.inner.as_mut() {

crates/pf-presenter/Cargo.toml

@@ -11,7 +11,11 @@ repository.workspace = true
 # Same Linux+Windows gating as the rest of the client stack (dmabuf import is the one
 # Linux-only module — see lib.rs).
 [target.'cfg(any(target_os = "linux", windows))'.dependencies]
-pf-client-core = { path = "../pf-client-core" }
+# `default-features = false`: the PyroWave decode backend is turned on through THIS crate's own
+# `pyrowave` feature (which re-exports it below), never by inheriting the dependency's default.
+# Otherwise a consumer that deliberately builds us without `pyrowave` still drags the vendored
+# C++ in — fatal on Windows ARM64, where Granite has no SIMD path.
+pf-client-core = { path = "../pf-client-core", default-features = false }
 # AVVkFrame access (Vulkan Video frames: live sync state under the frames lock).
 pf-ffvk = { path = "../pf-ffvk" }
 punktfunk-core = { path = "../punktfunk-core", features = ["quic"] }

crates/punktfunk-core/src/abi.rs

@@ -125,6 +125,12 @@ pub struct PunktfunkFrame {
     pub frame_index: u32,
     pub pts_ns: u64,
     pub flags: u32,
+    /// Wall-clock reassembly-completion instant (ns since the Unix epoch, CLOCK_REALTIME — the
+    /// clock `pts_ns` and the skew handshake use). THIS is the receipt stamp for latency math:
+    /// a stamp the embedder takes itself at the poll return additionally contains the
+    /// pre-decode hand-off queue wait, so a client-side standing backlog would masquerade as
+    /// network latency (ABI v9 — the 2026-07 two-pair standing-latency investigation).
+    pub received_ns: u64,
 }
 
 /// Snapshot of session counters.
@@ -391,6 +397,7 @@ pub unsafe extern "C" fn punktfunk_client_poll_frame(
                         frame_index: f.frame_index,
                         pts_ns: f.pts_ns,
                         flags: f.flags,
+                        received_ns: f.received_ns,
                     };
                 }
                 PunktfunkStatus::Ok
@@ -1744,6 +1751,7 @@ pub unsafe extern "C" fn punktfunk_connection_next_au(
                         frame_index: f.frame_index,
                         pts_ns: f.pts_ns,
                         flags: f.flags,
+                        received_ns: f.received_ns,
                     };
                 }
                 PunktfunkStatus::Ok

crates/punktfunk-core/src/client/frame_channel.rs

@@ -73,6 +73,142 @@ pub(crate) const NOOP_CLOCK_FLUSHES_TO_DISARM: u32 = 2;
 /// FIRST no-op clock flush — the moment a step is actually suspected.
 pub(crate) const CLOCK_RESYNC_INTERVAL: Duration = Duration::from_secs(60);
 
+/// Standing-latency bleed (the 2026-07 two-pair investigation): how far above the session's own
+/// one-way-delay floor a report window's MINIMUM must sit to count as a standing elevation. The
+/// jump-to-live detectors above deliberately ignore anything below ~6 frames / 400 ms, so a
+/// small standing state — a sub-frame kernel/reassembly backlog, or a stale clock offset after a
+/// wall-clock step — is carried forever and reads as permanent extra "network" latency. 10 ms
+/// sits above skew-handshake error + normal LAN jitter, and below a single 60 fps frame period,
+/// so the observed one-frame plateau (~17 ms) trips it while a healthy stream cannot.
+pub(crate) const STANDING_LAT_THRESH_NS: i128 = 10_000_000;
+
+/// Consecutive elevated report windows (~750 ms each) before the bleed escalates — ~4.5 s of a
+/// continuously standing, loss-free elevation. Windows with any loss reset the run: loss means
+/// genuine congestion, which the FEC/ABR machinery owns, not this detector.
+pub(crate) const STANDING_LAT_WINDOWS: u32 = 6;
+
+/// Per-session cap on flush+keyframe bleeds. A standing state that survives a clock re-sync AND
+/// this many local flushes is not local and not clock — the path latency itself changed; the
+/// detector disarms with a warning instead of paying a recovery keyframe every few seconds.
+pub(crate) const STANDING_LAT_MAX_BLEEDS: u32 = 3;
+
+/// What the standing-latency detector asks the pump to do this window (see [`StandingLatency`]).
+#[derive(Debug, PartialEq, Eq)]
+pub(crate) enum StandingLatAction {
+    None,
+    /// First escalation: ask for a mid-stream clock re-sync — free, and a stale offset from a
+    /// stepped/slewed wall clock produces exactly this signature (an applied re-sync re-bases
+    /// the floor via the pump's `clock_gen` watch, clearing the elevation if that was the cause).
+    Resync {
+        above_ms: i64,
+    },
+    /// The elevation survived a re-sync attempt: flush the local receive backlog + request a
+    /// keyframe (the jump-to-live action), draining a real sub-threshold standing queue. The
+    /// pump reports execution back via [`StandingLatency::bled`]; an unexecuted action simply
+    /// re-arms next window.
+    Bleed {
+        above_ms: i64,
+    },
+    /// Bleed cap reached and the elevation is back: give up and say so.
+    Disarm {
+        above_ms: i64,
+    },
+}
+
+/// Detector for a small, constant, loss-free one-way-delay elevation — the standing state the
+/// jump-to-live thresholds deliberately tolerate. Tracks the session's OWD floor (minimum of
+/// report-window minimums since start / last re-base) and escalates when windows sit
+/// persistently above it: re-sync first, then a bounded number of flush+keyframe bleeds, then
+/// disarm. Pure state machine (no clocks, no I/O) so the escalation ladder is unit-testable.
+pub(crate) struct StandingLatency {
+    /// Lowest window-minimum OWD seen since session start / last [`rebase`](Self::rebase).
+    floor_ns: Option<i128>,
+    /// Minimum per-frame OWD this report window; `None` = no frames yet.
+    window_min_ns: Option<i128>,
+    /// Consecutive elevated windows.
+    run: u32,
+    /// The current elevation already got its re-sync request — next escalation is a bleed.
+    resync_tried: bool,
+    bleeds: u32,
+    disarmed: bool,
+}
+
+impl StandingLatency {
+    pub(crate) fn new() -> Self {
+        StandingLatency {
+            floor_ns: None,
+            window_min_ns: None,
+            run: 0,
+            resync_tried: false,
+            bleeds: 0,
+            disarmed: false,
+        }
+    }
+
+    /// Feed one frame's skew-corrected OWD (capture→reassembly-complete, ns). Caller gates on a
+    /// live clock offset and plausibility (0 < owd < 10 s), like the ABR OWD signal.
+    pub(crate) fn note_frame(&mut self, owd_ns: i128) {
+        self.window_min_ns = Some(match self.window_min_ns {
+            Some(m) => m.min(owd_ns),
+            None => owd_ns,
+        });
+    }
+
+    /// Close a report window. `loss_free` = the window carried zero loss (loss resets the run —
+    /// congestion is the FEC/ABR machinery's problem, and queues under loss are not "standing").
+    pub(crate) fn on_window(&mut self, loss_free: bool) -> StandingLatAction {
+        let Some(wmin) = self.window_min_ns.take() else {
+            return StandingLatAction::None; // no frames this window — no evidence either way
+        };
+        let floor = *self.floor_ns.get_or_insert(wmin);
+        self.floor_ns = Some(floor.min(wmin));
+        let above_ns = wmin - floor;
+        if self.disarmed {
+            return StandingLatAction::None;
+        }
+        if !loss_free || above_ns < STANDING_LAT_THRESH_NS {
+            self.run = 0;
+            if above_ns < STANDING_LAT_THRESH_NS {
+                self.resync_tried = false; // elevation cleared — a future one re-syncs first again
+            }
+            return StandingLatAction::None;
+        }
+        self.run += 1;
+        if self.run < STANDING_LAT_WINDOWS {
+            return StandingLatAction::None;
+        }
+        self.run = 0; // each escalation gets a fresh observation run
+        let above_ms = (above_ns / 1_000_000) as i64;
+        if !self.resync_tried {
+            self.resync_tried = true;
+            StandingLatAction::Resync { above_ms }
+        } else if self.bleeds < STANDING_LAT_MAX_BLEEDS {
+            StandingLatAction::Bleed { above_ms }
+        } else {
+            self.disarmed = true;
+            StandingLatAction::Disarm { above_ms }
+        }
+    }
+
+    /// The pump executed a [`StandingLatAction::Bleed`] (flush + keyframe). The floor is KEPT: a
+    /// successful bleed brings OWD back down to it (elevation clears naturally); an unsuccessful
+    /// one leaves the elevation visible so the ladder continues toward the cap.
+    pub(crate) fn bled(&mut self) {
+        self.bleeds += 1;
+        self.window_min_ns = None;
+    }
+
+    /// A mid-stream clock re-sync was APPLIED (the pump's `clock_gen` watch): every OWD reading
+    /// shifted, so the floor and any elevation measured under the old offset are meaningless —
+    /// re-learn from scratch. The bleed budget survives (it caps keyframes per session).
+    pub(crate) fn rebase(&mut self) {
+        self.floor_ns = None;
+        self.window_min_ns = None;
+        self.run = 0;
+        self.resync_tried = false;
+    }
+}
+
 /// Client decode-stage latency accumulator for the adaptive-bitrate controller's decode signal.
 /// The embedder adds one sample per decoded frame ([`NativeClient::report_decode_us`], µs from the
 /// AU leaving [`NativeClient::next_frame`] to its decoded output) and the data-plane pump drains a
@@ -191,6 +327,7 @@ mod frame_channel_tests {
             pts_ns: i as u64,
             flags: 0,
             complete: true,
+            received_ns: 0,
         }
     }
 
@@ -258,3 +395,143 @@ mod frame_channel_tests {
         assert_eq!(popped(&ch), Some(total - FRAME_QUEUE_HARD_CAP as u32));
     }
 }
+
+#[cfg(test)]
+mod standing_latency_tests {
+    use super::{
+        StandingLatAction, StandingLatency, STANDING_LAT_MAX_BLEEDS, STANDING_LAT_THRESH_NS,
+        STANDING_LAT_WINDOWS,
+    };
+
+    const FLOOR: i128 = 2_000_000; // a healthy 2 ms LAN OWD
+    const ELEVATED: i128 = FLOOR + STANDING_LAT_THRESH_NS + 7_000_000; // ~one 60fps frame above
+
+    /// Run `n` windows at `owd`, asserting every window but the last returns None; returns the
+    /// last window's action.
+    fn run_windows(d: &mut StandingLatency, owd: i128, n: u32) -> StandingLatAction {
+        for i in 0..n {
+            d.note_frame(owd);
+            let a = d.on_window(true);
+            if i + 1 < n {
+                assert_eq!(a, StandingLatAction::None, "window {i} escalated early");
+            } else {
+                return a;
+            }
+        }
+        unreachable!("n > 0 by construction");
+    }
+
+    /// Learn a clean floor: one window at the healthy OWD.
+    fn learned(d: &mut StandingLatency) {
+        d.note_frame(FLOOR);
+        assert_eq!(d.on_window(true), StandingLatAction::None);
+    }
+
+    #[test]
+    fn healthy_stream_never_escalates() {
+        let mut d = StandingLatency::new();
+        learned(&mut d);
+        // Jitter riding above the floor but under the threshold: never a run.
+        for _ in 0..(STANDING_LAT_WINDOWS * 4) {
+            d.note_frame(FLOOR + STANDING_LAT_THRESH_NS - 1);
+            assert_eq!(d.on_window(true), StandingLatAction::None);
+        }
+    }
+
+    #[test]
+    fn escalation_ladder_resync_then_bleeds_then_disarm() {
+        let mut d = StandingLatency::new();
+        learned(&mut d);
+        // First full elevated run asks for the free fix: a clock re-sync.
+        assert!(matches!(
+            run_windows(&mut d, ELEVATED, STANDING_LAT_WINDOWS),
+            StandingLatAction::Resync { .. }
+        ));
+        // Re-sync didn't help (no rebase came) — each further run is a bleed, up to the cap...
+        for _ in 0..STANDING_LAT_MAX_BLEEDS {
+            assert!(matches!(
+                run_windows(&mut d, ELEVATED, STANDING_LAT_WINDOWS),
+                StandingLatAction::Bleed { .. }
+            ));
+            d.bled();
+        }
+        // ...then the detector gives up loudly, once, and stays quiet.
+        assert!(matches!(
+            run_windows(&mut d, ELEVATED, STANDING_LAT_WINDOWS),
+            StandingLatAction::Disarm { .. }
+        ));
+        d.note_frame(ELEVATED);
+        assert_eq!(d.on_window(true), StandingLatAction::None);
+    }
+
+    #[test]
+    fn loss_windows_reset_the_run() {
+        let mut d = StandingLatency::new();
+        learned(&mut d);
+        for _ in 0..(STANDING_LAT_WINDOWS - 1) {
+            d.note_frame(ELEVATED);
+            assert_eq!(d.on_window(true), StandingLatAction::None);
+        }
+        // A lossy window means congestion, not a standing state: run resets...
+        d.note_frame(ELEVATED);
+        assert_eq!(d.on_window(false), StandingLatAction::None);
+        // ...so the ladder needs the full run again before acting.
+        assert!(matches!(
+            run_windows(&mut d, ELEVATED, STANDING_LAT_WINDOWS),
+            StandingLatAction::Resync { .. }
+        ));
+    }
+
+    #[test]
+    fn recovery_resets_the_ladder_to_resync_first() {
+        let mut d = StandingLatency::new();
+        learned(&mut d);
+        assert!(matches!(
+            run_windows(&mut d, ELEVATED, STANDING_LAT_WINDOWS),
+            StandingLatAction::Resync { .. }
+        ));
+        // The elevation clears on its own (e.g. the successful bleed case, or transient): the
+        // next episode starts back at the free escalation, not at a bleed.
+        d.note_frame(FLOOR);
+        assert_eq!(d.on_window(true), StandingLatAction::None);
+        assert!(matches!(
+            run_windows(&mut d, ELEVATED, STANDING_LAT_WINDOWS),
+            StandingLatAction::Resync { .. }
+        ));
+    }
+
+    #[test]
+    fn applied_resync_rebases_and_clears_a_stale_offset_elevation() {
+        let mut d = StandingLatency::new();
+        learned(&mut d);
+        assert!(matches!(
+            run_windows(&mut d, ELEVATED, STANDING_LAT_WINDOWS),
+            StandingLatAction::Resync { .. }
+        ));
+        // The re-sync APPLIES (pump sees clock_gen move) → rebase. The corrected offset brings
+        // OWD readings back to truth; the floor re-learns and nothing ever escalates to a bleed.
+        d.rebase();
+        for _ in 0..(STANDING_LAT_WINDOWS * 2) {
+            d.note_frame(FLOOR);
+            assert_eq!(d.on_window(true), StandingLatAction::None);
+        }
+    }
+
+    #[test]
+    fn empty_windows_are_no_evidence() {
+        let mut d = StandingLatency::new();
+        learned(&mut d);
+        for _ in 0..(STANDING_LAT_WINDOWS - 1) {
+            d.note_frame(ELEVATED);
+            assert_eq!(d.on_window(true), StandingLatAction::None);
+        }
+        // A frameless window (paused stream) neither advances nor resets the run...
+        assert_eq!(d.on_window(true), StandingLatAction::None);
+        // ...so one more elevated window completes it.
+        d.note_frame(ELEVATED);
+        assert!(matches!(
+            d.on_window(true),
+            StandingLatAction::Resync { .. }
+        ));
+    }
+}

crates/punktfunk-core/src/client/pump.rs

@@ -1,8 +1,9 @@
 //! The client worker: QUIC handshake + control/input/datagram tasks + the blocking data-plane pump.
 
 use super::frame_channel::{
-    CLOCK_RESYNC_INTERVAL, FLUSH_AFTER, FLUSH_COOLDOWN, FLUSH_LATENCY,
+    StandingLatAction, StandingLatency, CLOCK_RESYNC_INTERVAL, FLUSH_AFTER, FLUSH_COOLDOWN,
-    NOOP_CLOCK_FLUSHES_TO_DISARM, NOOP_FLUSH_DATAGRAMS, QUEUE_HIGH, QUEUE_LOW, STANDING_TIME,
+    FLUSH_LATENCY, NOOP_CLOCK_FLUSHES_TO_DISARM, NOOP_FLUSH_DATAGRAMS, QUEUE_HIGH, QUEUE_LOW,
+    STANDING_TIME,
 };
 use super::worker::reject_from_close;
 use super::*;
@@ -514,15 +515,19 @@ pub(super) async fn run_pump(args: WorkerArgs) {
                                     // late exactly then) — keep the old estimate and let the next
                                     // periodic batch try again.
                                     if accept_resync(rtt_ns, clock_rtt_ns.unwrap_or(0)) {
-                                        clock_offset.store(offset_ns, Ordering::Relaxed);
+                                        // info, not debug: ≤1/min, and it is THE forensic
-                                        clock_gen.fetch_add(1, Ordering::Relaxed);
+                                        // trail for a stale-offset (stepped/slewed wall clock)
-                                        tracing::debug!(
+                                        // latency plateau — the 2026-07 two-pair investigation
+                                        // had to reconstruct this blind.
+                                        tracing::info!(
                                             offset_ns,
                                             rtt_us = rtt_ns / 1000,
                                             "mid-stream clock re-sync applied"
                                         );
+                                        clock_offset.store(offset_ns, Ordering::Relaxed);
+                                        clock_gen.fetch_add(1, Ordering::Relaxed);
                                     } else {
-                                        tracing::debug!(
+                                        tracing::info!(
                                             rtt_us = rtt_ns / 1000,
                                             "clock re-sync batch discarded — RTT above the \
                                              connect-time baseline (congested window)"
@@ -729,6 +734,12 @@ pub(super) async fn run_pump(args: WorkerArgs) {
         let mut clock_detector_armed = true;
         let mut resync_wanted = false;
         let mut seen_clock_gen = pump_clock_gen.load(Ordering::Relaxed);
+        // Standing-latency bleed (see StandingLatency): the third detector, for the small,
+        // constant, loss-free OWD elevation the two jump-to-live detectors deliberately
+        // tolerate (< QUEUE_HIGH frames, < FLUSH_LATENCY behind) — a sub-frame standing
+        // backlog, or a stale clock offset after a wall-clock step, either of which otherwise
+        // reads as permanent extra "network" latency for the rest of the session.
+        let mut standing_lat = StandingLatency::new();
         while !pump_shutdown.load(Ordering::SeqCst) {
             // The live host↔client offset: re-loaded every iteration so an applied mid-stream
             // re-sync takes effect on the very next frame's latency math.
@@ -740,6 +751,10 @@ pub(super) async fn run_pump(args: WorkerArgs) {
                 seen_clock_gen = gen;
                 stale_since = None;
                 noop_clock_flushes = 0;
+                // Every OWD reading shifted with the offset — the standing-latency floor and
+                // any elevation measured under the old one are meaningless now. If a stale
+                // offset WAS the elevation, this is also the moment it gets fixed.
+                standing_lat.rebase();
                 if !clock_detector_armed {
                     clock_detector_armed = true;
                     tracing::info!(
@@ -843,6 +858,51 @@ pub(super) async fn run_pump(args: WorkerArgs) {
                     window_dropped,
                 );
                 let _ = ctrl_tx.try_send(CtrlRequest::Loss(LossReport { loss_ppm }));
+                // Standing-latency bleed: close the detector's window with this report's loss
+                // verdict and run its escalation ladder — re-sync first (free; a stale offset
+                // from a stepped wall clock produces exactly this signature and the applied
+                // re-sync rebases the floor), then a bounded flush+keyframe (drains a real
+                // sub-threshold standing backlog the jump-to-live thresholds tolerate), then a
+                // loud disarm (the path latency itself changed; nothing local fixes that).
+                match standing_lat.on_window(loss_ppm == 0 && window_dropped == 0) {
+                    StandingLatAction::None => {}
+                    StandingLatAction::Resync { above_ms } => {
+                        tracing::info!(
+                            above_ms,
+                            "standing latency above the session floor with zero loss — \
+                             requesting a clock re-sync first (a stale offset reads exactly \
+                             like this)"
+                        );
+                        let _ = ctrl_tx.try_send(CtrlRequest::ClockResync);
+                    }
+                    StandingLatAction::Bleed { above_ms } => {
+                        // Shares the jump-to-live cooldown: an unexecuted bleed simply re-arms
+                        // over the next windows (the detector's run rebuilds).
+                        if last_flush.is_none_or(|t| t.elapsed() >= FLUSH_COOLDOWN) {
+                            last_flush = Some(Instant::now());
+                            flush_in_window = true;
+                            let flushed = session.flush_backlog().unwrap_or(0);
+                            let dropped = frames.clear();
+                            let _ = ctrl_tx.try_send(CtrlRequest::Keyframe);
+                            standing_lat.bled();
+                            tracing::warn!(
+                                above_ms,
+                                flushed_datagrams = flushed,
+                                dropped_frames = dropped,
+                                "standing latency survived a clock re-sync — bled the local \
+                                 backlog (flush + keyframe)"
+                            );
+                        }
+                    }
+                    StandingLatAction::Disarm { above_ms } => {
+                        tracing::warn!(
+                            above_ms,
+                            "standing latency persists after a re-sync and every bleed — not \
+                             local, not clock; the path latency changed. Leaving it be \
+                             (reconnect re-baselines)"
+                        );
+                    }
+                }
                 // Adaptive bitrate: drain any host ack first (its clamp is authoritative), then
                 // feed the controller this window's congestion signals; a decision becomes a
                 // SetBitrate on the control stream.
@@ -981,6 +1041,13 @@ pub(super) async fn run_pump(args: WorkerArgs) {
                         if clock_offset_ns != 0 && lat_ns > 0 {
                             owd_sum_ns += lat_ns;
                             owd_frames += 1;
+                            // The standing-latency detector rides the same signal, but off the
+                            // window MINIMUM (robust against jitter/burst spikes — a standing
+                            // state elevates the floor itself). Same 10 s plausibility clamp as
+                            // the hn stats use.
+                            if lat_ns < 10_000_000_000 {
+                                standing_lat.note_frame(lat_ns);
+                            }
                         }
                         if clock_detector_armed
                             && clock_offset_ns != 0

crates/punktfunk-core/src/lib.rs

@@ -83,7 +83,12 @@ pub use stats::Stats;
 /// `punktfunk_connection_clipboard_{control,offer,fetch,serve,cancel}` +
 /// `punktfunk_connection_next_clipboard`. Additive; the wire grows only backward-compatible control
 /// messages (0x40-0x44) and a new `Welcome::host_caps` bit, so [`WIRE_VERSION`] is unchanged.
-pub const ABI_VERSION: u32 = 8;
+/// v9: `PunktfunkFrame` grew `received_ns` — the reassembly-completion receipt stamp, so
+/// embedders stop stamping receipt at the hand-off pull (which folds the pre-decode queue wait
+/// into apparent network latency). Struct-size change on the frame poll surface = a hard ABI
+/// break for embedders reading `PunktfunkFrame`; nothing on the wire moved, so [`WIRE_VERSION`]
+/// is unchanged.
+pub const ABI_VERSION: u32 = 9;
 
 /// The punktfunk/1 **wire** version — what `Hello`/`Welcome` carry and hosts equality-check.
 /// Deliberately its own constant: [`ABI_VERSION`] tracks the embeddable **C surface**

crates/punktfunk-core/src/packet/reassemble.rs

@@ -489,6 +489,7 @@ impl Reassembler {
                 pts_ns: done.pts_ns,
                 flags: done.user_flags,
                 complete: true,
+                received_ns: 0, // stamped by Session::poll_frame at the session boundary
             }));
         }
         Ok(None)
@@ -592,6 +593,7 @@ impl ReassemblyWindow {
                                 pts_ns: f.pts_ns,
                                 flags: f.user_flags,
                                 complete: false,
+                                received_ns: 0, // stamped by Session::poll_frame at the session boundary
                             });
                         }
                     }

crates/punktfunk-core/src/session.rs

@@ -30,6 +30,14 @@ pub struct Frame {
     /// ([`crate::packet::USER_FLAG_CHUNK_ALIGNED`]) are ever delivered partial; missing
     /// shard ranges are zero-filled at their exact offsets.
     pub complete: bool,
+    /// Wall-clock instant (ns since the Unix epoch, CLOCK_REALTIME basis — the same clock the
+    /// skew handshake compares and the host stamps `pts_ns` with) at which this AU finished
+    /// reassembly, stamped by [`Session::poll_frame`] as the frame leaves the session. Embedders
+    /// that previously stamped receipt themselves at the hand-off pull should use this instead:
+    /// the pull stamp additionally contains the pre-decode queue wait, silently folding any
+    /// client-side standing backlog into the apparent NETWORK latency. The reassembler itself
+    /// leaves this 0 (it owns no clock — the stamp is the session boundary's job).
+    pub received_ns: u64,
 }
 
 /// One end of a stream. Constructed for a single [`Role`]; calling the other role's
@@ -82,6 +90,18 @@ pub struct Session {
     lane_scratch: Vec<Vec<u8>>,
 }
 
+/// Stamp [`Frame::received_ns`] as the frame crosses the session boundary in
+/// [`Session::poll_frame`] — completed frames return the moment their last shard lands, so
+/// stamping at return IS stamping at reassembly completion (µs apart). CLOCK_REALTIME to match
+/// `pts_ns` / the skew handshake (deliberately not monotonic — cross-machine latency math).
+fn stamp_received(mut f: Frame) -> Frame {
+    f.received_ns = std::time::SystemTime::now()
+        .duration_since(std::time::UNIX_EPOCH)
+        .map(|d| d.as_nanos() as u64)
+        .unwrap_or(0);
+    f
+}
+
 /// Wire-packet count at which a frame's sealing splits across two lanes (plan Phase 1.5):
 /// below it the channel rendezvous (~µs) isn't worth it; at it the halved AES-GCM span
 /// (≥ ~125 µs of ~1 µs/packet work) dwarfs the hand-off. ≈300 KB of wire, i.e. ≥150 Mbps
@@ -684,7 +704,7 @@ impl Session {
                     // Nothing new on the wire — hand over an aged-out partial if one is
                     // waiting (it can only get staler).
                     if let Some(p) = self.reassembler.take_partial() {
-                        return Ok(p);
+                        return Ok(stamp_received(p));
                     }
                     return Err(PunktfunkError::NoFrame);
                 }
@@ -748,12 +768,12 @@ impl Session {
             }
             if let Some(frame) = pushed {
                 StatsCounters::add(&self.stats.frames_completed, 1);
-                return Ok(frame);
+                return Ok(stamp_received(frame));
             }
             // A push that completed nothing may still have aged a partial out — deliver it
             // ahead of further draining (its successors are already arriving).
             if let Some(p) = self.reassembler.take_partial() {
-                return Ok(p);
+                return Ok(stamp_received(p));
             }
         }
     }

include/punktfunk_core.h

@@ -37,7 +37,12 @@
 // `punktfunk_connection_clipboard_{control,offer,fetch,serve,cancel}` +
 // `punktfunk_connection_next_clipboard`. Additive; the wire grows only backward-compatible control
 // messages (0x40-0x44) and a new `Welcome::host_caps` bit, so [`WIRE_VERSION`] is unchanged.
-#define ABI_VERSION 8
+// v9: `PunktfunkFrame` grew `received_ns` — the reassembly-completion receipt stamp, so
+// embedders stop stamping receipt at the hand-off pull (which folds the pre-decode queue wait
+// into apparent network latency). Struct-size change on the frame poll surface = a hard ABI
+// break for embedders reading `PunktfunkFrame`; nothing on the wire moved, so [`WIRE_VERSION`]
+// is unchanged.
+#define ABI_VERSION 9
 
 // The punktfunk/1 **wire** version — what `Hello`/`Welcome` carry and hosts equality-check.
 // Deliberately its own constant: [`ABI_VERSION`] tracks the embeddable **C surface**
@@ -1112,6 +1117,12 @@ typedef struct {
     uint32_t frame_index;
     uint64_t pts_ns;
     uint32_t flags;
+    // Wall-clock reassembly-completion instant (ns since the Unix epoch, CLOCK_REALTIME — the
+    // clock `pts_ns` and the skew handshake use). THIS is the receipt stamp for latency math:
+    // a stamp the embedder takes itself at the poll return additionally contains the
+    // pre-decode hand-off queue wait, so a client-side standing backlog would masquerade as
+    // network latency (ABI v9 — the 2026-07 two-pair standing-latency investigation).
+    uint64_t received_ns;
 } PunktfunkFrame;
 
 // A single input event. `#[repr(C)]` — shared verbatim with the C ABI as