6 Commits

Author	SHA1	Message	Date
enricobuehler	75627c8afe	feat(audio): end-to-end 5.1/7.1 surround across the native path + all clients ... Adds negotiated 5.1/7.1 surround to the punktfunk/1 protocol and every client (previously stereo-only): - core: new shared `audio` layout table (LAYOUT_51/71 + identity multistream mapping, canonical wire order FL FR FC LFE RL RR SL SR); Hello/Welcome `audio_channels` negotiation via the trailing-byte back-compat pattern (old peers fall back to stereo); C-ABI `punktfunk_connect_ex6`, `punktfunk_connection_audio_channels`, and in-core multistream decode `punktfunk_connection_next_audio_pcm` for embedders without a multistream Opus decoder. Real-libopus channel-identity round-trip test. - host: native audio thread captures + Opus-(multi)stream-encodes at the negotiated count (with a cross-session cached-capturer channel-mismatch fix); GameStream surround unified onto the safe `opus::MSEncoder`, dropping `audiopus_sys` (~4 unsafe blocks) and un-gating Windows GameStream surround; WASAPI loopback capture relaxed to 2/6/8 with the correct dwChannelMask. - clients: Linux (PipeWire), Windows (WASAPI), Android (AAudio) decode via `opus::MSDecoder` + render multichannel; Apple decodes in-core to PCM → AVAudioEngine with an explicit wire-order channel layout; each gains a Stereo/5.1/7.1 setting. `punktfunk-probe --audio-channels N` is the headless validator. Verified on Linux: core/host/linux/probe test suites + the Android Rust (cargo-ndk) build, clippy -D warnings, and rustfmt all green. Windows/Apple builds, all on-glass checks, and the live native loopback are pending (CI / a free box). Also lands the concurrent in-tree HEVC 4:4:4 host work (PUNKTFUNK_444): it shares the same touched files (quic.rs, punktfunk1.rs, encode/*, ...) and so cannot be committed separately from the surround changes. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-06-28 21:11:05 +00:00
enricobuehler	3e6c9f6060	feat(gamepad): add virtual Xbox One/Series + DualShock 4 pad types ... Extends virtual-controller support beyond Xbox 360 + DualSense. Goal: a physical Xbox One or PS4 pad on the client gets a near-native matching virtual pad on the host, auto-resolved from the controller type. Protocol/core: - GamepadPref gains XboxOne (wire 3) + DualShock4 (wire 4); to_u8/from_u8/ from_name/as_str + C ABI PUNKTFUNK_GAMEPAD_XBOXONE/_DUALSHOCK4 constants (compile-time guard ties them to the enum). Single-byte wire form is unchanged, so it's forward-compatible (older peers degrade to Auto). Host (Linux): - New UHID DualShock 4 backend (inject/dualshock4.rs) bound by hid-playstation: lightbar, touchpad, motion, rumble — DualSense minus adaptive triggers / player LEDs / mute. Reuses the DualSense pure state + button mapping; only the report byte layout, the real-DS4 HID descriptor, the GET_REPORT handshake (0x12 MAC mandatory; 0x02 calibration; 0xa3 firmware) and the touchpad resolution (1920x942) differ. Touchpad/motion ride the existing 0xCC plane, lightbar the 0xCD Led plane (deduped); rumble the universal 0xCA plane. - Xbox One/Series is the uinput Xbox-360 backend parameterized with the One S USB identity (045e:02ea) for matching glyphs — XInput-identical otherwise. - PadBackend dispatch + resolver handle both; off Linux the UHID pads and One/Series fold into Xbox 360. Windows-host DS4 (ViGEm) deferred. Clients (auto-resolve physical pad -> virtual type, plus manual settings): - Linux/Windows (SDL3): SDL_GAMEPAD_TYPE_PS4 -> DualShock 4, _XBOXONE -> Xbox One; PadInfo carries the resolved pref; DS4 touchpad/motion capture + lightbar already type-agnostic. Linux settings combo + label updated. - Apple (GameController): GCDualShockGamepad/GCXboxGamepad detection, DS4 touchpad capture, settings picker entries. - Android (Kotlin): InputDevice VID/PID auto-detect (matching the other clients) + settings entries. - probe: --gamepad help/aliases. Also hardens the Android JNI boundary: wrap the teardown + poll-thread shims in catch_unwind so a panic degrades to a logged no-op instead of aborting the app. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-21 13:34:44 +00:00
enricobuehler	3526517eb1	feat: HDR Step-0 colour-metadata transport + security-audit hardening ... Two strands, entangled in punktfunk1.rs, committed together (one builds-green tree). HDR pipeline Step 0 — glass-to-glass colour-metadata transport (docs/hdr-pipeline-plan.md): - Protocol/ABI: ColorInfo on the Welcome + a 0xCE HdrMeta datagram carry the source colour space + HDR10 static mastering metadata (quic.rs, abi.rs connect_ex5 fixing caps=0). - New platform-independent, unit-tested HDR static-metadata helpers (hdr.rs): chromaticities (1/50000), mastering luminance (0.0001 cd/m2), MaxCLL/MaxFALL in HDR10/ST.2086 units. - Capture/encode hooks (capture.rs, encode.rs set_hdr_meta) + Linux client / probe plumbing. Security-audit hardening — top 3 from docs/security-review.md, each adversarially verified: - #1 [HIGH] Secret file permissions. The host key.pem/cert.pem and both trust stores are now written owner-only: 0600 + dir 0700 on Unix (mirrors mgmt_token), best-effort SYSTEM/Administrators/OWNER-only icacls DACL on Windows (%ProgramData% is Users-readable). Closes a local key-disclosure -> host-impersonation gap. New gamestream::{create_private_dir, write_secret_file} + a 0600 regression test. - #2 [HIGH] Native SPAKE2 PIN is single-use. The PIN is consumed the moment the host sends its key-confirmation (which lets the client test its one guess), before reading the proof, so any completed attempt -- right OR wrong -- disarms the window. A wrong PIN isn't observable host-side (the client aborts before sending its proof), so consuming on first attempt is what delivers the documented "one online guess" instead of an unbounded brute-force of the static 4-digit PIN. Test verifies single-use. - #3 [MEDIUM] RTSP packetSize is bounded ([64,2048] in stream_config) and VideoPacketizer::new uses saturating .max(1), killing a PRE-AUTH div-by-zero/underflow panic of the video thread. Tests for {0,15,16,17} + out-of-range rejection. fmt + clippy -D warnings clean; full workspace test suite green (93 host tests). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-21 09:07:59 +00:00
enricobuehler	516efcc3a3	feat(core/fec): adaptive FEC — size recovery to measured loss, not a flat 20% ... On a clean link the flat 20% FEC is pure waste: extra wire bytes AND extra packets. On a packet-rate-bound uplink (the Steam Deck's WiFi tx caps ~22k pps regardless of bitrate) those extra packets directly cost goodput — measured at 200 Mbps goodput, 20% FEC drove ~10% loss vs ~2.6% at 0% (it saturated the link). Adaptive FEC closes the loop: - Client measures the loss FEC is absorbing each ~750 ms window from session stats (recovered shards / received, + a bump when a frame went unrecoverable) and sends a periodic `LossReport { loss_ppm }` on the control stream (new message; `window_loss_ppm` helper, shared + unit-tested). Connector (Apple/Linux/Windows) and probe both report; suppressed during a speed test so its filler can't skew it. - Host maps loss → recovery % (`adapt_fec`: ≈ loss×1.4 + 1pt, clamped 1..50) and applies it live via `Session::set_fec_percent` (the wire is self-describing — each packet carries its block's data/recovery counts, so the receiver needs no notice). A clean link decays to ~1%; loss ramps it up and converges. - `PUNKTFUNK_FEC_PCT`, when set, now PINS FEC static (disables adaptation) so speed-test / measurement runs keep a fixed, known overhead. Unset ⇒ adaptive, starting at 10%. An older host ignores LossReport (unknown control message) and keeps static FEC; an older client simply never reports and the host holds its start value. Builds + clippy + fmt + tests green (adapt_fec / window_loss_ppm / loss_report unit tests). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-20 21:31:07 +00:00
enricobuehler	f37a304fba	fix(core/speed-test): packet-level throughput + paced burst (kill the 0/100% cliff) ... The punktfunk/1 speed test was unusable across every client/host: at the start of a burst a little data got through, then everything read as dropped (~10 MB total). Two compounding bugs: 1. Receive side measured throughput from fully-reassembled FLAG_PROBE *access units* only. The instant loss crossed the 20% FEC budget no AU completed, so the figure cliffed to 0 / 100% loss even though most bytes still arrived — a binary cliff, not a graded measurement. 2. Send side blasted each filler AU (up to 256 KB ≈ 200 packets) into the socket buffer in one unpaced batch, unlike the real video path which paces. On a small buffer (e.g. the Steam Deck's 416 KB) a single AU overflowed it, so the test measured self-inflicted buffer overflow instead of the link. Fixes: - Host `run_probe_burst` keeps each AU a small (~16 KB) burst and paces by the byte budget, mirroring `paced_submit`; reports the WIRE packets the kernel accepted and the ones the send buffer dropped (stat deltas), separating host-side drops from link loss. - `ProbeResult` gains `wire_packets_sent` + `send_dropped` (back-compat decode: a 21-byte pre-wire-stats result still decodes, new fields 0). - Clients (probe + connector) count delivered traffic at the packet level via `session.stats()` deltas over the burst window, so throughput/loss degrade gracefully. Connector freezes the delivered figure when the host report lands so resumed video can't inflate it. New `ProbeOutcome`/`PunktfunkProbeResult` fields: `host_drop_pct`, `wire_packets_sent`, `send_dropped`. Validated on loopback (graded 142→1391 Mbps, host_drop/link_loss split correctly, no cliff) and live against the Deck: clean to ~200 Mbps goodput / 273 Mbps wire at 0% link loss, host send buffer the wall above that (the lever-#1 target). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-20 17:46:17 +00:00
enricobuehler	9c8fa9340c	refactor: drop milestone names + consolidate clients; loss-recovery & rumble fixes ... Two bodies of work in one commit (the rename moved files the fixes also touched). Naming/structure cleanup (pre-launch): - Host modules m3.rs->punktfunk1.rs, m0.rs->spike.rs; CLI m3-host->punktfunk1-host, m0->spike; bare `punktfunk-host` now prints help. Types M3Options/M3Source-> Punktfunk1Options/Punktfunk1Source. - Clients consolidated out of crates/ into clients/: punktfunk-client-rs-> clients/probe (crate punktfunk-probe), client-linux->clients/linux, client-windows->clients/windows, punktfunk-android->clients/android/native (crate punktfunk-client-android; kept [lib] name=punktfunk_android so the JNI contract is unchanged). crates/ now holds only core + host. - Milestone codes M0-M4 purged from code/CLI/CLAUDE.md/README/docs/docs-site, kept only in docs/implementation-plan.md. docs/m2-plan.md-> docs/gamestream-host-plan.md. CI/gradle/flatpak paths updated. Client loss-recovery (video froze and never recovered after a brief drop): - Export punktfunk_connection_frames_dropped through the C ABI (the core already tracked it for the client keyframe-recovery loop; it was never reachable from the ABI clients). Regenerated punktfunk_core.h. - Apple (StreamPump + Stage2Pipeline) and Android (decode.rs) now poll frames_dropped and request a keyframe when it climbs -- the same loss-driven recovery Linux/Windows already had. Under infinite GOP the decoder silently conceals reference-missing frames, so the decode-error trigger rarely fires. Apple rumble robustness (worked then went spotty -- DualSense + Xbox): - Add CHHapticEngine stopped/reset handlers (rebuild on app background / audio interruption / server reset) and drop the permanent `broken` latch on a transient drive failure; latch only when the controller truly has no haptics. - Surface swallowed SDL set_rumble errors on Linux/Windows + diagnostic logging. Verified: cargo build/clippy/fmt --workspace, C-ABI harness, header drift. Not runnable on this box (verify in CI): Gitea workflows, gradle/Android, flatpak, Swift/decky. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-18 21:05:58 +00:00