100 Commits

Author	SHA1	Message	Date
enricobuehler	b9f4cf1f3e	fix(host/windows): don't 2-way-split-encode Main10 — it's SLOWER on Ada (fixes broken HDR animations) ... The "broken animations in HDR" was an encode-throughput cliff, not the ACCESS_LOST churn. Measured at 5120x1440@240 HEVC Main10 on the RTX 4090: forced 2-way split-encode = 7.6 ms/frame (~131 fps, well over the 4.17 ms/240fps budget → choppy), while SINGLE engine = 2.8-3.9 ms/frame (~256-357 fps, fits 240). The split/merge overhead dominates for 10-bit; a single Ada NVENC engine already handles 5K@240 Main10 comfortably. So the split decision now forces DISABLE for Main10 (bit_depth >= 10), keeping the existing forced-2 only for 8-bit above 1 Gpix/s. PUNKTFUNK_SPLIT_ENCODE still overrides. Added a split-mode log line. Validated live on the 4090: encode_us_p50 7.6 ms → 3.9 ms at 5K240 HDR with no env override. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 21:40:28 +00:00
enricobuehler	b1e95a386f	fix(host/windows): tiered DXGI recovery — cheap re-DuplicateOutput for the HDR ACCESS_LOST churn ... The HDR path produced a constant ACCESS_LOST churn during real desktop activity (window resize / Start menu / DWM transitions): the duplication keeps getting invalidated but the OUTPUT stays valid (probe passes — 0 born-lost over 72 rebuilds). The old recovery did a FULL rebuild (new device + factory) on every loss, which re-inits NVENC + seeds black + was throttled to 4x/s → mostly-frozen, re-init churn = "broken animations". Now recovery is tiered (mirrors Sunshine): try_reduplicate() does a fresh DuplicateOutput on the EXISTING device+output — no new device, so NO encoder re-init, NO black seed, gpu_copy/HDR textures/last_present kept → frames resume immediately. Only a genuine output loss (secure-desktop switch) or a dead device (DEVICE_REMOVED/RESET) falls back to the full, throttled recreate_dupl. Both paths probe the new duplication and reject a born-lost one. Validated synthetically (1080p60 + 5120x1440@240 HDR): pipeline stable, 0 churn, frames flow. The real-desktop churn needs live validation (can't synthesize DWM animations). Secure-desktop "UI never appears in-session" is a separate issue (output gone in-session; only a fresh monitor re-add works) — still open. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 21:31:14 +00:00
enricobuehler	0a3b92d994	fix(host/windows): HDR cursor brightness (203-nit) + probe-before-adopt recovery; windows-client bootstrap doc ... - HDR cursor: sRGB→linear decode + scale to HDR graphics white (PUNKTFUNK_HDR_CURSOR_NITS, default 203 per BT.2408) in the FP16 cursor composite, so it's no longer ~2.5x too dim. SDR path unchanged; the masked-color (I-beam) inversion blend left unscaled. Cursor cbuffer widened 16→32 + bound to PS. (Validated live: cursor now correct brightness in HDR.) - Secure-desktop recovery: recreate_dupl now PROBES the rebuilt duplication with a 50ms AcquireNextFrame and only adopts it when live (Ok/WAIT_TIMEOUT); a born-lost one (immediate ACCESS_LOST) is dropped so the caller repeats the last frame + retries. Plus reassert_isolation() re-detaches physical displays on every recovery (re-routing the secure/HDR desktop to the virtual output, the delta a fresh reconnect has). NOTE: the born-lost ACCESS_LOST storm in HDR is NOT yet resolved by these — still under investigation (animations/secure-UI/cursor-trail in HDR remain). - docs/windows-client-bootstrap.md: handoff for the native Windows Rust client (windows-rs Reactor + WinUI 3 SwapChainPanel, D3D11VA decode, WASAPI audio, SDL3 input; ports crates/punktfunk-client-linux; 10-bit/HDR present; dev boxes + gotchas). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 21:20:42 +00:00
enricobuehler	bbabc04bca	feat(hdr): Windows HDR10 + 10-bit end-to-end, negotiated; non-blocking capture recovery ... Adds true HDR (BT.2020 PQ) and 10-bit (HEVC Main10) streaming, negotiated so an 8-bit/SDR client is never sent a stream it can't decode, plus a robust fix for the capture losing the stream across a secure-desktop transition. Protocol (punktfunk-core/quic.rs): - Hello gains `video_caps` (VIDEO_CAP_10BIT / VIDEO_CAP_HDR), Welcome gains `bit_depth`, both as optional trailing bytes (back-compat). client-rs advertises 10-bit via PUNKTFUNK_CLIENT_10BIT; the connector advertises 0 for now (in-band detection drives the native clients). Regenerated punktfunk_core.h. Windows host: - 10-bit Main10: host enables it only when the client advertised VIDEO_CAP_10BIT AND PUNKTFUNK_10BIT is set; threaded through open_video → NVENC (profile Main10, pixelBitDepthMinus8). - HDR: when the captured desktop is scRGB FP16 (R16G16B16A16_FLOAT, HDR on), copy it to an FP16 surface, composite the cursor there, convert scRGB → BT.2020 PQ 10-bit (R10G10B10A2) via a shader, and encode HEVC Main10 with the BT.2020/PQ colour VUI (ABGR10 input). Fixes the freeze + cursor-trail that came from feeding FP16 into the BGRA path. Reacts dynamically to the HDR toggle. - Capture recovery: rebuild is now a single NON-BLOCKING attempt, throttled to ~4×/s, repeating the last good frame between attempts (format-tagged last_present). During a secure-desktop dwell SudoVDA's output is gone; the old blocking 12 s retry starved the send loop for seconds so the client timed out and disconnected — now the session stays fed (frozen) until the desktop returns. Also seeds a black frame on recovery. Apple client (PunktfunkKit): - Detects HDR in-band from the stream VUI (PQ transfer function), decodes to 10-bit P010, and presents via an rgba16Float + BT.2020 PQ CAMetalLayer with EDR; SDR path unchanged. Switches automatically on a mid-session HDR toggle. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 20:28:52 +00:00
enricobuehler	26fbd9ec64	perf(host/windows): zero-copy NVENC — encode the capturer's texture in place (halve 3D-engine load) ... The Windows host pegged the GPU 3D engine at ~97% during high-fps desktop streaming — measured (per- process GPU-engine counters) as OUR process, not DWM. Cause: TWO VRAM->VRAM CopyResource per frame (dupl->gpu_copy in the capturer, then gpu_copy->nvenc_pool in the encoder), and on Windows D3D11 routes copies to render-target textures through the 3D engine (the DMA copy engine sat idle at 7%), so at 240 fps they saturate it and contend with a game's own rendering. Eliminate the second copy: NVENC now registers the capturer's D3D11 texture directly (cached by raw pointer, the cloned texture kept alive until unregister) and encode_pictures it IN PLACE — no encoder-owned input pool, no per-frame copy. Safe because the host encode loop is synchronous (capture -> submit -> poll, where lock_bitstream blocks until the encode finishes), so the capturer never overwrites the texture mid-encode; documented in the module header in case that ever changes. 2 GPU copies/frame -> 1 (the remaining dupl->gpu_copy is unavoidable; that DXGI surface is transient). Measured: SM/compute ~10-15% at ~217 fps 5K (was ~20% at only ~48 fps with two copies), 3687 frames decoded clean. Windows-only; Linux/macOS unaffected. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 17:33:07 +00:00
enricobuehler	c830246037	feat(host/windows): UDP send offload + NVENC 2-way split-encode (1 Gbps+ / 5K@240) ... The Windows host couldn't sustain high-throughput / high-fps streams — two gaps vs the Linux host, both found via live RTX 4090 measurement (PERF timing + nvidia-smi per-engine attribution): - UDP Send Offload (USO). punktfunk-core's UdpTransport sent one packet per `send` syscall on Windows (send_batch/send_gso were Linux-only), capping throughput at high packet rates. Add a Windows `send_gso` override using `WSASendMsg` + `UDP_SEND_MSG_SIZE` (the Windows analogue of Linux UDP GSO) via windows-sys — one syscall segments a coalesced <=512-segment super-buffer to the connected peer. On by default with auto-fallback (PUNKTFUNK_GSO=0 disables, error latches off); plugs into the existing paced send path. SO_SNDBUF (32MB) was already cross-platform. - NVENC 2-way split-frame encoding. A single Ada NVENC session tops out ~0.8 Gpix/s, so 5K@240 (1.77 Gpix/s) took ~8 ms/frame -> a ~125 fps ceiling at high motion (the in-game stutter). Set NV_ENC_INITIALIZE_PARAMS.splitEncodeMode = TWO_FORCED above ~1 Gpix/s (matching the Linux libavcodec split_encode_mode path) to use both 4090 encoders — measured ~8 ms -> ~4 ms/frame at throughput. Env override PUNKTFUNK_SPLIT_ENCODE; init-failure fallback disables it (e.g. H264). Windows-only paths; Linux/macOS unaffected. Builds clean on x86_64-pc-windows-msvc. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 16:52:59 +00:00
enricobuehler	f4b4a6c1e4	feat(host/windows): native res, cursor, secure-desktop capture, windowless SYSTEM launch ... Live-validated Mac <-> RTX 4090 at the display's native 5120x1440@240: - Resolution: set_active_mode enumerates the IDD's advertised modes and sets the requested resolution at the best supported refresh (keeps 5120x1440@240; no more silent fallback to the 1080p OS default when an exact mode is briefly unavailable). - Bitrate auto-cap: NVENC init probes and steps the average bitrate down to the GPU's codec-level max so a high client bitrate connects (matches the Linux host; we do not split NVENC sessions). - Mouse cursor: DXGI duplication excludes the HW cursor; capture the pointer shape/position (GetFramePointerShape) and GPU-composite it before NVENC. Color cursors alpha-blend; masked-color (the text I-beam) uses an INV_DEST_COLOR inversion blend so the caret inverts the screen and shows on any background (no black box); monochrome handled too. - Secure desktop (lock / login / UAC): run as SYSTEM in the interactive session, follow the input desktop via SetThreadDesktop, and on the WinSta switch recreate the D3D11 device and re-resolve the virtual output's GDI name from the stable SudoVDA target id (the name changes across the topology rebuild; the old failure hunted the stale \\.\DISPLAYn and dropped). ACCESS_LOST / INVALID_CALL / device-removed are recoverable, and a mid-stream resolution change is followed (capturer + NVENC re-init at the new size). isolate_displays detaches other monitors so Winlogon renders to the virtual output. One real session recovered 1012 desktop switches and completed cleanly. Windows-only backends; Linux/macOS unaffected. Builds clean on x86_64-pc-windows-msvc. Deployment (windowless SYSTEM launch via PsExec + hidden VBScript) documented in docs/windows-host.md. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 15:46:34 +00:00
enricobuehler	8ab262f8f8	feat(trust): host-gated trust-on-first-use — PIN pairing mandatory by default ... TOFU let anyone who could reach the host click "Trust" and stream, which defeats the point on a LAN. Make SPAKE2 PIN pairing the default and only way to trust a NEW host; TOFU survives as an explicit HOST opt-in (for fully trusted networks), advertised over mDNS so clients render their trust UI from the host's policy rather than offering trust on faith. Contract: - Host advertises pair=required (default) or pair=optional. pair=required rejects unpaired clients at the handshake; pair=optional accepts them (TOFU). - Clients: a pinned host whose fingerprint matches connects silently; a pinned host whose fingerprint CHANGED forces re-pairing via PIN (no re-trust shortcut); a NEW host is offered TOFU only if it advertised pair=optional, otherwise PIN pairing is mandatory; a manually-typed or unknown-policy host is always PIN. Host (crates/punktfunk-host/src/main.rs): - m3-host now REQUIRES pairing by default (was open by default). New --allow-tofu opts into accepting unpaired clients + advertising pair=optional; pairing is always armed (PIN logged at startup). serve --native was already secure-by-default (serve --open). The mDNS advert and the accept loop already mapped require_pairing -> pair=required + reject; only the m3-host CLI default + help text changed. Clients honor the advertised policy: - Android (MainActivity.kt): TOFU only for a discovered pair=optional host; manual/unknown -> PIN; fp-change -> re-pair only (dropped the "Forget & re-TOFU" shortcut). - Apple (HostDiscovery/SessionModel/ContentView/HostCards/HostStore): new allowsTofu (pair==optional, distinct from unknown); connect() gates .awaitingTrust on it; unpinned non-optional hosts route to the PIN sheet; "Forget Identity" re-pairs rather than re-TOFUs. - Linux (app.rs/ui_hosts.rs/session.rs): ConnectRequest.pair_required -> pair_optional; initiate_connect routes pinned/fp-changed/optional/else; manual + --connect unknown -> PIN; a pinned connect rejected on trust grounds re-pairs. Docs (CLAUDE.md, README.md, docs-site/content/docs/pairing.md): describe the gated model — PIN is the default, TOFU an explicit opt-in with an impostor warning. Verified: host cargo check/clippy/fmt clean; Android built + live (emulator -> home-worker-2): a manual connect now opens the PIN dialog (no Trust button) and the PIN ceremony streams; Apple swift build clean; Linux clippy -D warnings + fmt clean on the Linux box. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 13:27:52 +02:00
enricobuehler	fe9921cc1c	fix(dist): kill the version-shadow + add build provenance (P0) ... The stale code a default install/upgrade got was a TAG LEAK: deb.yml/rpm.yml shared `tags: ['v*']` with the Apple-client release.yml, so the v0.1.0/v0.1.1 tags cut to ship the macOS app ALSO published host packages versioned 0.1.1 — which outranks every rolling 0.0.1~ciN / 0.0.1-0.ciN build in both registries (dpkg/rpm version compares confirm), so `apt install`/`rpm-ostree install` silently fetched ~99-commits-stale code while the READMEs claimed auto-tracking. Two fixes: - Decouple host publishing from Apple `v*` tags: deb.yml/rpm.yml now trigger on `host-v*` only, so a client tag can never poison the host channel again. - Bump the rolling base 0.0.1 -> 0.2.0 (deb `0.2.0~ciN`, rpm `0.2.0-0.ciN`): sits ABOVE the stray 0.1.1 yet BELOW a future 0.2.0 tag, and still climbs monotonically by run number — so `apt upgrade`/`rpm-ostree upgrade` genuinely move forward. Spec default + build scripts + PKGBUILD pkgver bumped to match. Build provenance (so a stale/shadowed host is detectable): build.rs stamps PUNKTFUNK_BUILD_VERSION (set by CI = the full package version, e.g. 0.2.0~ci120.g802e98d; falls back to the crate version for a plain `cargo build`) into the binary via rustc-env. Surfaced in `punktfunk-host --version`, the startup log, and the mgmt /health + /host `version` field (was a hardcoded CARGO_PKG_VERSION). Deliberately env-driven, not git-derived — the RPM builds from a git-archive tarball with no .git. Version computed BEFORE the build in deb.yml; the spec %build exports it from %{version}-%{release} (and gains --locked for reproducibility parity with the .deb path). Validated: plain build reports 0.0.1, env-stamped build reports 0.2.0~ci999.gdeadbee. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 10:30:21 +00:00
enricobuehler	7654b20b2a	fix(host/windows): NVENC capture on real GPU + HOME-less config dir ... Validated live on an RTX 4090 (Windows 11) host streaming to the Rust reference client over the LAN: SudoVDA virtual display → DXGI Desktop Duplication (D3D11 zero-copy) → NVENC HEVC → punktfunk/1. 720p60 and 1080p60 both clean (181 / 177 frames, 0 mismatched, p50 1.6 / 3.45 ms cross-machine), coexisting with Apollo. Two real-hardware bugs the GPU-less VM couldn't surface: - DXGI capturer: the SudoVDA virtual monitor's DXGI output is enumerated under the GPU that *renders* it (the 4090, LUID 0x15df6), NOT under the SudoVDA "adapter" LUID SudoVDA reports (0x23276). Restricting the output search to that LUID found nothing → "adapter has no output named \\.\DISPLAYn". Now search ALL adapters for the GDI name, bind the D3D11 device to whichever adapter exposes it (NVENC then shares that device), with a settle-retry (the output appears a beat after display creation) and topology logging. - native_pairing / apps: keyed config paths off raw $HOME, which a Windows service/scheduled-task context doesn't set → "HOME unset" hard-fail at m3-host startup. Route both through gamestream::config_dir(), which falls back to %APPDATA% on Windows (cert/paired/apps now under AppData\Roaming). clippy -D warnings + build green on x86_64-pc-windows-msvc (default and --features nvenc) and Linux (78/78 tests). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 09:18:15 +00:00
enricobuehler	b2e5878711	feat(host/mgmt): HTTPS + token auth by default (no loopback no-auth fallback) ... The mgmt API already always serves HTTPS (the host identity cert), but on a loopback bind with no token it ran unauthenticated — any local process could drive it. Make auth required ALWAYS: - new mgmt_token::load_or_generate(): token precedence is --mgmt-token > env PUNKTFUNK_MGMT_TOKEN > persisted ~/.config/punktfunk/mgmt-token > freshly generated 32-byte hex, persisted 0600 in KEY=VALUE form (so the bundled web console can source it directly as a systemd EnvironmentFile — one source of truth). config_dir() made pub(crate). - parse_serve() resolves the token via load_or_generate() when unset, so a bare `serve` Just Works with auth on and no operator step. - mgmt::run() drops the loopback no-token exemption and requires a token; require_auth()'s unauthenticated fallback now returns 401. The paired-cert (mTLS) branch is unchanged — Apple client + library auth unaffected. - web /api proxy: 503 (legible) instead of forwarding an empty bearer. - tests: test_app/test_app_native default a token, send() auto-attaches the bearer; blank-token test asserts the new "no token" refusal. 80 pass. - docs: mgmt module doc + host.env.example reflect always-on auth + auto-gen. Compiles, clippy/fmt clean, openapi no drift. Part B (bundle the web console into apt, auto-wired to this token) follows. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 08:42:28 +00:00
enricobuehler	2bca89c555	feat(host/windows): Steam library auto-discovery on Windows ... The Steam `LibraryProvider` keyed off `$HOME` + Linux paths, so the game library was empty on Windows. Add Windows discovery: the default Steam install dirs under Program Files (`ProgramFiles(x86)`/`ProgramFiles`/ `ProgramW6432`), with games on other drives picked up via each root's `libraryfolders.vdf` — whose Windows values are backslash-escaped, so unescape `\\` → `\`. The existing root-scan/dedup logic is shared via a new `steam_roots_existing` helper. The custom store (mgmt JSON CRUD) was already cross-platform; only Steam auto-discovery was Linux-only. Not yet covered: a non-default Steam install dir (the registry `Valve\Steam\InstallPath`). Degrades gracefully — no Steam → empty list. clippy -D warnings + library tests green on Windows and Linux. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 07:59:21 +00:00
enricobuehler	66f579461f	feat(host/windows): GameStream (Moonlight) audio on Windows — stereo ... `serve` gave Moonlight clients no audio on Windows: the GameStream audio stream thread was Linux-only (a non-Linux stub errored). Widen the stereo path to Windows — the encode/RTP/AES-CBC/hand-rolled-RS(4,2)-FEC logic is platform-neutral and already live-validated byte-identical on Linux, and it now runs over the WASAPI capturer + the (already cross-platform) `opus` crate. The cfg gates go from `linux` to `any(linux, windows)`; only the surround path stays Linux-only because its libopus *multistream* encoder needs `audiopus_sys` (a Linux dep) — on Windows a surround request fails cleanly with a "use stereo" error. Linux stays byte-identical (the `SessionEncoder::Surround` variant and its match arm keep `#[cfg(linux)]`, so Linux compiles exactly as before). Verified: clippy -D warnings + host test suite green on both x86_64-pc-windows-msvc (73/73) and Linux (78/78). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 07:56:11 +00:00
enricobuehler	e3de19b52e	test(host): make two host tests portable to Windows ... The Windows host test suite hit two pre-existing portability failures (the autonomous Windows bring-up never ran `cargo test` on the VM): - `vdisplay::detect_active_session_*` asserted a non-empty XDG runtime dir — a Linux concept with no Windows equivalent. Gate just that assertion to Linux (keep the call so the fn stays used → no dead_code). - `mgmt::openapi_document_is_complete_and_checked_in` did a byte compare against the checked-in spec, which git may check out CRLF on Windows while serde_json emits LF. Compare content with `\r` stripped. Host suite now 73/73 on x86_64-pc-windows-msvc; Linux unchanged (78 ok). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 07:49:01 +00:00
enricobuehler	9c61b03101	feat(host/windows): ViGEm rumble back-channel + Windows clippy clean ... Wire the host→client rumble path on Windows, the analogue of the Linux uinput EV_FF read loop: a game's force-feedback on the virtual Xbox 360 pad is delivered by ViGEm's notification API (`request_notification` → `spawn_thread`, gated by the crate's `unstable_xtarget_notification` feature). A per-pad background thread stores the latest motor levels; `pump_rumble` relays changes to the client on the universal 0xCA plane (motors scaled 0..255 → 0..65535). Dropping the target aborts the notification, so the thread exits with the session. Live verification still needs a physical pad. Also fix the Windows backends' clippy debt — these modules are cfg- excluded from Linux CI, so `clippy -D warnings` never saw them, and the VM's rustc 1.96 clippy is stricter on shared code than the CI image: - dxgi: manual checked division → checked_div().map_or - sendinput: `x = x | y` → `x |= y` - sudovda: `.then(|| ptr)` → `.then_some(ptr)` - m3 pick_compositor: drop the needless early return (match form) - m3 resolve_compositor: Windows arm is a tail expr, not `return` All Windows backends now build + clippy clean (default and --features nvenc); Linux unaffected (fmt/clippy/check green). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 07:43:40 +00:00
enricobuehler	7d5dbd47b7	fix(host/dualsense): heartbeat virtual DualSense so it isn't dropped when idle ... "Controller disconnected every few seconds" (Forza Horizon, held steady): the virtual UHID DualSense emitted HID report 0x01 ONLY on state change, but a real DualSense streams it continuously (~250 Hz). When the player holds the wheel/throttle steady the client sends no wire events, so the host wrote nothing and /dev/uhid went silent for seconds — the kernel hid-playstation driver / Proton / SDL treat that as an unplugged controller. (The uinput X-Box pad is immune: evdev holds last-known state with no periodic-report requirement.) Add DualSenseManager::heartbeat(max_gap): re-emit each live pad's CURRENT report when it's been silent for max_gap (idempotent — a stale-but-correct frame, never a phantom input; write_state bumps seq+timestamp). write() resets the per-pad timer, so an actively-used pad emits no extra reports — the heartbeat only fills genuine silence. PadBackend::heartbeat() drives it at an 8 ms gap (~125 Hz) for DualSense (no-op for X-Box), called every input-thread tick (the loop already runs ≤4 ms). GET_REPORT feature replies + the pad lifecycle were ruled out by the investigation (pad is created once, never torn down mid-session). Compiles, clippy/fmt clean, 78 host tests pass. Verify on the box: held-idle DualSense stays present in evtest / no SDL CONTROLLERDEVICEREMOVED; Forza no longer toasts "controller disconnected". Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 07:37:49 +00:00
enricobuehler	b8a1b7e469	feat(host/windows): host→client Opus audio — vendored libopus on MSVC ... The `m3` audio_thread (desktop capture → Opus 48 kHz stereo 5 ms CBR → AUDIO_MAGIC datagrams) now runs on Windows, fed by the WASAPI loopback capturer. The `opus` crate vendors libopus via `audiopus_sys` + cmake (no system lib / vcpkg), so it builds on MSVC — moved into a `cfg(any(linux, windows))` deps table and widened the audio_thread cfg to match (the stub now only covers other targets, e.g. macOS). Build note: CMake 4 rejects libopus's old `cmake_minimum_required`; set `CMAKE_POLICY_VERSION_MINIMUM=3.5` when building the host on Windows. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 07:30:00 +00:00
enricobuehler	336357643c	feat(host): KWin virtual output primary + settle portal env on switch ... Two parked follow-ups from the session-aware host work: #3 — KWin/Mutter virtual output not set primary. The auto-detected desktop path *is* "stream this desktop", but the per-session virtual output wasn't promoted to primary, so KDE/GNOME panels + windows stayed on an unstreamed real output and the streamed screen showed only wallpaper. apply_session_env now defaults PUNKTFUNK_KWIN_VIRTUAL_PRIMARY / PUNKTFUNK_MUTTER_VIRTUAL_PRIMARY on for the auto path (explicit config still wins), so the streamed output becomes the sole desktop. #2 — input flaky after a mid-stream Gaming->Desktop switch. The xdg portal (D-Bus-activated) and the systemd --user env still pointed at the old session, so the host's RemoteDesktop portal opened against a half-stale env: it accepted events but they didn't reach the compositor until a reconnect. New vdisplay::settle_desktop_portal() pushes the live session env into the systemd/D-Bus activation environment and (for KWin) restarts the portal so it re-reads it, mirroring a fresh desktop login (and the existing wlroots portal restart). Called from the mid-stream switch rebuild slot before the injector reopens. GNOME uses Mutter's direct EIS, so it only gets the env push. Compiles, clippy/fmt clean, 78 host tests pass. Live validation on the Bazzite box next. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 06:49:53 +00:00
enricobuehler	2448a33698	style(host/windows): rustfmt the Windows backends ... Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 01:50:16 +00:00
enricobuehler	8cba886c17	feat(host/windows): ViGEm virtual gamepad backend ... Windows GamepadManager via vigem-client (ViGEmBus) — the uinput-xpad analogue: one virtual Xbox 360 controller per client pad index, created lazily on first State. GameStream/Moonlight already uses the XInput conventions (low-16 button bits, sticks -32768..32767 +Y up, triggers 0..255), so the GamepadFrame->XGamepad mapping is 1:1. Replaces the non-Linux GamepadManager stub (same new/handle/pump_rumble API the m3 PadBackend drives, so no m3 change). Graceful when ViGEmBus is absent (gamepad disabled, session continues). Compiles clean on Windows + Linux; live-test needs the ViGEmBus driver + a physical pad. Rumble back-channel is a TODO (ViGEm notification API). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 01:46:51 +00:00
enricobuehler	69ba6ec45d	feat(host/windows): NVENC D3D11 hardware encoder (--features nvenc) ... Zero-copy capture->encode on the GPU via the raw NVENC API (nvidia_video_codec_sdk sys + ENCODE_API; the safe wrapper is CUDA-only). Opens an NV_ENC_DEVICE_TYPE_DIRECTX session on the SAME ID3D11Device as the DXGI capturer (carried on the new FramePayload::D3d11), registers a pool of BGRA textures once, CopyResources each captured texture in and encode_picture; CBR/ULL, infinite GOP, P-only, forced-IDR for RFI. The DXGI capturer gains a D3D11 zero-copy output (selected, like the encoder, by PUNKTFUNK_ENCODER=nvenc) so capture+encode share textures. OFF by default (the nvenc feature pulls the NVENC SDK + cudarc): the default Windows host links without it (openh264 path). cudarc builds toolkit-less via the SDK ci-check feature (dynamic-loading). At link time --features nvenc needs nvencodeapi.lib (NVENC SDK, or an import lib generated from the driver's nvEncodeAPI64.dll) on PUNKTFUNK_NVENC_LIB_DIR. Both default and --features nvenc builds validated to compile+link GPU-less on the VM (import lib generated from the driver DLL). Runtime needs a real NVIDIA GPU. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 01:39:46 +00:00
enricobuehler	04b76ebfc7	feat(host/windows): run serve/m3-host on Windows (config paths + compositor) ... The punktfunk/1 control plane already compiled on Windows; these wire the last gaps so the host actually runs: config_dir falls back to %APPDATA% (HOME\.config when set), paired_path uses it, hostname from COMPUTERNAME, and resolve_compositor short-circuits the Linux session-detection on Windows (SudoVDA is the single backend; vdisplay::open ignores the compositor arg). Validated live on the VM: m3-host creates its identity, binds the QUIC endpoint (fingerprint logged), advertises mDNS (_punktfunk._udp, host from COMPUTERNAME), and accepts sessions. GPU-less validations green: m0 synthetic->openh264->core FEC loopback (120/120, 0 mismatches) and the m3 c_abi_connection_roundtrip control-plane test. Full session capture (SudoVDA->DXGI) + NVENC remain GPU-gated. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 01:15:51 +00:00
enricobuehler	9c2499fd45	feat(host/windows): DXGI Desktop Duplication capture backend ... Windows Capturer via DXGI Desktop Duplication: create a D3D11 device on the SudoVDA adapter (by LUID), find the matching output (by GDI name), DuplicateOutput, and per AcquireNextFrame copy the desktop into a CPU-readable staging texture -> tightly-packed BGRA (FramePayload::Cpu, feeds the openh264 software encoder GPU-lessly). Handles WAIT_TIMEOUT (reuse last frame) and ACCESS_LOST (re-duplicate). Adds FramePayload::D3d11(D3d11Frame) for the future NVENC zero-copy path, and a VirtualOutput.win_capture identity (adapter LUID + GDI name) carried out of the SudoVDA backend. Pure helpers (pack_luid/gdi_name_matches/depad_bgra) unit-tested on the VM; the live duplication path needs a real GPU + an activated SudoVDA monitor. Compiles clean on Windows + Linux. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 01:06:21 +00:00
enricobuehler	45e5157091	feat(host/windows): WASAPI loopback audio capture ... Windows AudioCapturer via the wasapi crate (0.23): loopback the default render endpoint (Render device + Direction::Capture + shared mode => STREAMFLAGS_LOOPBACK) at 48 kHz stereo f32 with autoconvert, feeding the existing Opus path with no resampling. Dedicated COM-MTA thread owns the !Send WASAPI objects; interleaved f32 chunks leave over a bounded lossy channel; RAII Drop stops + joins. Bring-up handshake reports a missing endpoint as Err so a session continues without audio. open_audio_capture Windows factory arm + module. Init chain validated live on the VM (open succeeds; next_chunk waits on a silent system). Virtual mic deferred (no Windows virtual-audio endpoint). m3 audio_thread wiring + opus hoist land with the integration task. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 00:57:19 +00:00
enricobuehler	cbbeaa5c29	feat(host/windows): openh264 software H.264 encoder (GPU-less path) ... Windows Encoder impl via the openh264 crate (statically-bundled, BSD-2): low-latency screen-content config (Baseline/no-B-frames, bitrate RC, BT.709 limited, near-infinite GOP + forced-IDR recovery via request_keyframe), packed CPU pixels (BGRx/BGRA/RGB/RGBA/RGBx/BGR) -> I420 -> AnnexB with in-band SPS/PPS each IDR. Synchronous: submit encodes immediately, poll hands back the one AU, flush is a no-op. Windows open_video factory selects it (PUNKTFUNK_ENCODER=software|nvenc|auto; NVENC arm lands later), H.264-only with a clear error otherwise, SW bitrate ceiling. Unit-tested live on the VM: synthetic BGRx -> AnnexB IDR + SPS NAL. Unblocks the GPU-less capture->encode->FEC->send pipeline. Compiles clean on Windows + Linux. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 00:43:19 +00:00
enricobuehler	cce2eb60f6	feat(host/windows): SendInput input-injection backend ... Windows InputInjector via SendInput (Win32 KeyboardAndMouse), mirroring the wlroots backend: absolute mouse (MOUSEEVENTF_VIRTUALDESK normalized to the virtual desktop), relative mouse, scancode keyboard (MapVirtualKeyExW + extended-key flagging), scroll (no sign flip — Windows wheel matches GameStream), buttons. Client already sends Windows VK codes (no keycode table). Reattaches the thread to the input desktop (OpenInputDesktop/SetThreadDesktop) to survive UAC/lock switches. New Backend::SendInput, the Windows auto-default in default_backend(), open() arm, windows-crate features. Compiles clean on Windows + Linux. Live injection validates with the in-session host run (SendInput is desktop-isolated from an SSH network logon). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 00:34:40 +00:00
enricobuehler	26741feada	feat(host/windows): SudoVDA virtual-display backend (control path) ... Windows VirtualDisplay backend driving SudoVDA (the Apollo IDD) via its DeviceIoControl IOCTL protocol: open by interface GUID, ADD at the client's exact WxH@Hz (mode baked into the IOCTL, no EDID seeding), mandatory watchdog ping thread, QueryDisplayConfig name resolution, RAII Drop -> REMOVE. Wired behind the existing VirtualDisplay trait (open()/probe() Windows arms). Validated live on the GPU-less VM (standalone + via the trait, env-gated test): version 0.2.1, ADD 1920x1080@60 -> target, watchdog hold, REMOVE. Monitor activation into a WDDM path (-> capturable \\.\DisplayN) needs a real GPU and is deferred with capture/NVENC. docs/windows-host.md updated. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 00:05:40 +00:00
enricobuehler	5fddaac6af	fix(host): compile punktfunk-host on windows (x86_64-pc-windows-msvc) ... Gate the Linux-only bits so the host crate builds on MSVC (it already built on Linux + macOS): drm_sync/dmabuf_fence use DRM ioctls + libc (a linux-only target dep) and have no non-Linux callers; VirtualOutput.remote_fd is a PipeWire concept. The full dep tree (aws-lc-rs, quinn, rusty_enet, axum) builds clean on MSVC and the binary runs (openapi emits the spec) — only these 3 cfg-gates were needed. First step of the Windows host port (docs/windows-host.md). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 23:30:24 +00:00
enricobuehler	f869b434ba	fix(host): input follows session per-connect + restore-guard on desktop switch ... Two fixes from live Bazzite testing of the managed-Gaming + mid-stream work: 1. Input now FOLLOWS the active session. The host-lifetime injector was pinned to the first backend it opened and only reopened on an inject FAILURE — but with Feature A keeping the managed gamescope warm, its EIS socket stays alive, so a switch to the KDE desktop + reconnect kept injecting into the idle gamescope (input silently dead on KDE). injector_service_thread now compares the resolved input backend (default_backend() ← PUNKTFUNK_INPUT_BACKEND, set per connect by apply_input_env, and on a mid-stream switch) each event and reopens when it changes. Fixes input on a Gaming->Desktop reconnect AND Feature B's mid-stream input re-route, with no plumbing. 2. Debounced TV-restore no longer yanks you back to gaming. do_restore_tv_session now checks detect_active_session(): if a desktop session is active (the user switched), it tears down the idle managed gamescope but does NOT restart the gaming autologin. Observed live: the restore fired and restarted gamescope-session-plus@ogui-steam while the client was already on the KDE desktop. Also: document PUNKTFUNK_SESSION_WATCH (Feature B opt-in) in the Bazzite host.env and correct the managed-default description. Compiles, clippy/fmt clean, 78 tests. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 23:14:36 +00:00
enricobuehler	c5ee9871ec	style(host/gamescope): wrap long PENDING_RESTORE assignment (rustfmt) ... The schedule_restore_tv_session assignment exceeded 100 cols; rustfmt wraps it. The fix was made post-commit but only m3.rs was staged for 95a820b, so CI's fmt --check failed on the committed unwrapped line. Stage the wrap. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 22:50:31 +00:00
enricobuehler	95a820b68a	feat(host/m3): mid-stream session-switch watcher (Feature B, opt-in) ... Feature B: while streaming, follow a Gaming<->Desktop switch on the box without a reconnect. A ~1s watcher thread (session_watcher_loop) self-baselines on the live ActiveKind and, when it changes and stays changed for a 3s debounce (the old/new compositors coexist briefly during a switch), sends a SessionSwitch to the encode loop. The loop's new rebuild slot — taking precedence over a queued mode change — retargets the process env (apply_session_env/apply_input_env) and rebuilds the WHOLE backend in place at the SAME client mode (vdisplay::open + build_pipeline_with_retry), reusing the proven mode-switch rebuild path: the Session + send thread (QUIC control + UDP data plane + side planes) stay up, the client sees a brief freeze then an IDR. Old pipeline kept on a rebuild failure (transient vs permanent classified via is_permanent_build_error). Input re-routes via the host-lifetime injector's lazy reopen against the new PUNKTFUNK_INPUT_BACKEND. Opt-in via PUNKTFUNK_SESSION_WATCH (off by default; never under an explicit PUNKTFUNK_COMPOSITOR pin), so it lands inert and is promoted to default only after live validation on a real Bazzite Gaming<->KDE flip. The watcher snapshots the SessionEnv so only the encode thread writes process env. Compiles, clippy/fmt clean, 78 host tests pass. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 22:42:13 +00:00
enricobuehler	c25706b355	feat(host/gamescope): managed-default Gaming with debounced TV-restore ... Feature A: in Gaming Mode, default to a host-managed gamescope at the CLIENT's mode (tear the TV's autologin down on connect) instead of attaching to the running TV session — so the client receives ITS resolution (capture == encode == client mode, fixing the InitializeEncoder size mismatch the attach path hit), not the TV's 4K. Reliability is the debounce: restore_managed_session() now SCHEDULES the TV restore RESTORE_DEBOUNCE (5s) after the last disconnect via a host-lifetime worker, instead of restoring immediately per-disconnect. A reconnect inside the window cancels the pending restore and reuses the still-warm managed session (create_managed_session clears PENDING_RESTORE at the top) — so a quick reconnect (e.g. a controller hiccup) never triggers a gamescope stop/relaunch, which is the per-connect churn that leaked NVIDIA GPU context on F44 (the black-screen reconnect). - vdisplay/gamescope.rs: PENDING_RESTORE + RESTORE_DEBOUNCE; schedule_restore_tv_session (debounced), do_restore_tv_session (the actual restore, worker-driven), start_restore_worker (100ms tick, RAII keepalive handle). create_managed_session cancels the pending restore + reuse path unchanged. - vdisplay.rs: apply_input_env flips gamescope to managed-DEFAULT; PUNKTFUNK_GAMESCOPE_ATTACH (or an explicit _NODE) opts back to attach for couch-on-TV; _MANAGED forces managed. restore_managed_session schedules; new start_restore_worker wrapper. - m3.rs serve(): hold the restore worker for the host lifetime. - bazzite host.env: document managed-default + the ATTACH opt-out. Compiles, clippy-clean, 78 host tests pass. F44 single stop/start leak to be verified live on the box. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 22:34:33 +00:00
enricobuehler	6f77574876	feat(host/vdisplay): per-connect active-session backend selection ... Bazzite/SteamOS boxes flip between Steam Gaming Mode (gamescope) and a KDE/GNOME desktop. The host statically read PUNKTFUNK_COMPOSITOR / XDG_CURRENT_DESKTOP once, so switching to Desktop Mode failed the stream, and the gamescope managed-session path stopped+relaunched the autologin per connect — leaking GPU context on F44 (reconnect → black screen). Replace the static read with a runtime probe of the live session and route each connect to the right backend, churn-free: - vdisplay::detect_active_session() probes /proc for the running compositor of our uid (gamescope|kwin_wayland|gnome-shell|sway, desktop outranks a leftover gamescope) + scans the runtime dir for the live wayland-* socket. Returns an ActiveKind + the SessionEnv (WAYLAND_DISPLAY/XDG_RUNTIME_DIR/DBUS/ XDG_CURRENT_DESKTOP) that targets it. - apply_session_env() writes that into the process env per connect (host serves one session at a time), so every backend (capture + input) opens against the live session; apply_input_env() points input at the matching backend and selects gamescope ATTACH (no managed restart) unless PUNKTFUNK_GAMESCOPE_MANAGED. - resolve_compositor() (native path) auto-detects + applies; explicit PUNKTFUNK_COMPOSITOR still wins (legacy/CI/forcing). detect() is now active-aware for the GameStream/mgmt callers too. - Bazzite host.env drops the static gamescope force; documents auto-detection + the optional overrides. Result: Desktop Mode → KWin/Mutter virtual output at the client's mode (churn-free, the reliable path); Gaming Mode → attach to the running gamescope (no SIGSEGV/GPU leak on reconnect). Compiles + clippy-clean; 78 host tests pass. Live validation on the Bazzite box pending (box offline). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 21:41:51 +00:00
enricobuehler	0bc60ebc44	fix(host/gamescope): free Steam from the autologin TV session while streaming ... On a Bazzite host that autologins into gaming mode on a physical display (the F44 default: gamescope-session-plus@ogui-steam on the TV), Steam — single-instance — is held by that session, which renders to the TV's native mode. The host-managed session then can't start its own Steam, so it captured the TV's 4K output instead of the client's mode (stretched). On F43 the box wasn't in gaming mode, so the host's Steam was the only one. Fix: on connect, the host-managed gamescope path stops any running autologin `gamescope-session-plus@*` unit (frees Steam) before launching its own session at the client's mode; on client disconnect (`restore_tv_session`, called from serve_session teardown) it stops our session and restarts the autologin one, so the TV returns to gaming mode by default when no one is streaming. Stopping the `--user` unit sticks (Relogin only fires on the full logind session ending — verified live), so no sddm config change is needed. Cost: a Steam cold-start per connect, given single-instance. No-op on non-Bazzite / headless boxes (nothing to stop → nothing to restore). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 19:38:58 +00:00
enricobuehler	b4a85a8610	feat(host/mgmt): mTLS auth — a paired client's cert authorizes the REST API ... Phase 1 of moving the library off a manual mgmt token: the management API now serves over HTTPS with the host's persistent identity (the cert clients already pin) and OPTIONAL client-cert auth. A request is authorized if EITHER the peer presented a client certificate whose SHA-256 is in the punktfunk/1 paired store (the same trust the QUIC data plane uses — so a paired native client needs no token), OR it carries the bearer token (the web console / admin). `/health` stays open. axum-server can't surface the peer cert to a handler, so `serve_https` runs the rustls handshake itself (tokio-rustls), reads the verified peer certificate, and serves the axum Router over hyper with the fingerprint attached to each request; `require_auth` checks it against `NativePairing::is_paired`. The verifier reuses the GameStream AcceptAnyClientCert, parameterized to make client auth optional (a browser with no cert still completes the handshake and falls back to the token). Validated live: paired cert → 200, unpaired cert / no creds / bad token → 401, bearer → 200, /health open. (Note: the API is now HTTPS with a self-signed cert — a browser shows a one-time trust prompt; native clients pin by fingerprint.) Next: Apple client presents its identity over mTLS (drops the token field); embed the web console; enable HTTPS mgmt by default. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 17:37:25 +00:00
enricobuehler	01409d9d8a	fix(host/dualsense): report full battery + log rumble forwarding ... Two DualSense (UHID) fixes surfaced live on the Bazzite host: - Battery: serialize_state never set the input report's status byte (struct off 52 → r[53]), so hid-playstation read battery capacity 0 and SteamOS warned "low battery" even on a fully-charged pad. Set it to 0x0A (discharging, low nibble 0xA → 100 %) — a virtual pad has no real cell. (Forwarding the client pad's real charge is a later feature.) Regression assert added to the layout test. - Rumble diagnostic: log the silent→active transition when forwarding a buzz on the 0xCA plane, so a live test can tell "host never receives rumble from the game" (Steam Input / parse) apart from "client doesn't render it". Once per buzz, no spam. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 16:14:28 +00:00
enricobuehler	27e58658af	feat(launch): punktfunk/1 launch integration — client picks a title, host runs it ... Plan step 4 (plumbing + host behavior). A client can ask the host to launch a library title on connect; the host resolves it against ITS OWN library and runs it in the session — the client sends only the store-qualified id, never a command, so a remote peer can't inject one. - Protocol (quic.rs): `Hello.launch: Option<String>` (the GameEntry id). Appended after `name`; when launch is present but name absent, a zero-length name placeholder keeps the offset deterministic — so a Hello with neither field stays byte-identical to the bitrate-era 26-byte form (test-asserted). Old peers ignore it; new hosts decode None from old clients. Round-trip + back-compat + truncation tests. - Host: `library::launch_command(id)` resolves id → command via the host's own library — `steam_appid` → `steam steam://rungameid/<appid>` (appid validated as digits, the only client-influenced part), `command` → the host-stored command verbatim (trusted, never from the client). m3.rs sets PUNKTFUNK_GAMESCOPE_APP from it before bringup, exactly as the GameStream /launch path does (one session at a time). Unit-tested incl. an injection-attempt guard. Takes effect on the bare-spawn gamescope path; a no-op on a shared desktop / attach-to-existing session. - C ABI: `punktfunk_connect_ex4` adds `launch_id` (NULL = none); `_ex3` now delegates to it. Threaded through NativeClient::connect → WorkerArgs → Hello. - client-rs gains `--launch ID` (headless testing); client-linux passes None (no picker yet). Header regenerated. Next: the Apple library grid passes the picked id via punktfunk_connect_ex4. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 14:56:18 +00:00
enricobuehler	6351d516e0	feat(host/library): game library API — Steam adapter + custom store ... A new `library` module + four mgmt endpoints surface the host's games to clients (plan: "surface the user's games"). An adapter layer (`LibraryProvider`) so future stores (Heroic/Epic, GOG, Lutris) slot in behind one uniform `GameEntry`. - SteamProvider: reads the LOCAL Steam install — no Steam Web API key, no network. Installed titles from steamapps/appmanifest_<appid>.acf; extra library folders (incl. paths with spaces) from libraryfolders.vdf; candidate roots cover classic, Flatpak and Deck layouts, canonicalized + deduped (the .steam/{steam,root} symlinks all fold to one). Runtimes/redistributables (Proton, Steam Linux Runtime, Steamworks Common, SteamVR) filtered out. Artwork = the public Steam CDN by appid (portrait/hero/logo/header), fetched directly by the client. - Custom store: ~/.config/punktfunk/library.json, write-then-rename persisted, CRUD'd via the API — the "create custom entries via the admin web UI" requirement. - API (under /api/v1, OpenAPI-documented + checked in): GET /library (all stores merged, sorted), POST /library/custom, PUT/DELETE /library/custom/{id}. - `punktfunk-host library` subcommand dumps the resolved library as JSON (diagnostic, mirrors `openapi`). Validated live against the real Steam library on the Bazzite box: 89 appmanifests → 78 games (11 tools filtered), correct titles/sort, and the CDN art URLs return 200. 5 unit tests for the VDF/ACF parsing, tool filter, art URLs, custom mapping. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 13:43:03 +00:00
enricobuehler	8425cd0826	fix(encode): probe each GPU's real max bitrate instead of failing (or blind-capping) ... Root cause of the Mac "session ended" at 880 Mbps / 1.3 Gbps: the host requests a bitrate NVENC can't express at any codec level and `avcodec_open2` returns EINVAL ("Invalid argument"), so the pipeline build fails after 4 identical retries and the session dies at encoder init — before a single video packet (which is why the client's UDP counters never moved). The ceiling is GPU/driver-specific: an RTX 4090 caps HEVC at ~800 Mbps (Level 6.2 High tier) and rejects above it, while an RTX 5070 Ti accepts 1.3 Gbps. Rather than hard-cap every build to a conservative guess (which would needlessly throttle capable cards), open_video now PROBES: open at the requested bitrate, and step down (codec spec ceiling, then 0.75x to a 50 Mbps floor) ONLY when this GPU returns EINVAL. Each GPU runs at its own real maximum — the 5070 Ti keeps 1.3 Gbps, the 4090 lands at 800 Mbps and streams instead of dying. Non-EINVAL failures (no GPU, bad mode, OOM) still surface immediately rather than being masked by retries. Codec::max_bitrate_bps is now just the first step-down candidate, not a clamp. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 09:58:42 +00:00
enricobuehler	c2ae40ef9e	feat(net/mac): default-on recvmsg_x batched Mac recv + GSO host + longer probe ... The Mac/iOS client's wall around ~380 Mbps on a 2.5 G path is the receive drain, not the transport: a loopback speed-test pushes 380/600/1000 Mbps at 0.0% loss, but Darwin has no recvmmsg(2), so the macOS client was doing one recv() syscall per packet — ~40-90k syscalls/s on one core. When the recv loop can't drain fast enough the kernel socket buffer backs up and drops, which the client sees as a sustained stream stalling/freezing in the 300-400 Mbps range (and an immediate "session ended" when a 500 Mbps+ first keyframe bursts in). - core/transport: flip recvmsg_x (the batched Darwin recv, ~30x fewer syscalls) from opt-in to default ON, opt-out via PUNKTFUNK_RECVMSG_X=0. Keeps the auto-fallback to the scalar loop on any unexpected syscall error. The Apple CI swift-test loopback now exercises this path by default. - packaging/kde host.env: enable PUNKTFUNK_GSO=1 — UDP segmentation offload on the host send path (one sendmsg per ~64 packets), the dominant lever above ~1 Gbps. Already wired (send_sealed -> send_gso) with sendmmsg auto-fallback. - apple SpeedTestSheet: lengthen the bandwidth probe 2 s -> 5 s so the measured number stops swinging wildly (50 vs 900 Mbps on the same link) — long enough for steady-state send + recv drain to settle. Matches host MAX_PROBE_MS. - host capture: PUNKTFUNK_SYNTH_NOISE synthetic high-entropy source for reproducible throughput testing of the encode->FEC->send->recv path. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 00:35:26 +00:00
enricobuehler	fb1443650b	style: rustfmt the kwin virtual-primary helpers ... Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 21:05:01 +00:00
enricobuehler	a3a3dfc85b	fix(vdisplay/kwin): make the streamed output the sole desktop (PUNKTFUNK_KWIN_VIRTUAL_PRIMARY) ... On a headless KDE appliance the session has two outputs — run-headless-kde.sh's `kwin --virtual` bootstrap (where plasmashell draws by default) and our per-session streamed output — so the client saw only the wallpaper of an empty extended output (the KWin analogue of the GNOME/Mutter VIRTUAL_PRIMARY issue). New opt-in PUNKTFUNK_KWIN_VIRTUAL_PRIMARY: after creating the virtual output, set it primary via kscreen-doctor (KWin then re-homes the desktop onto it and disables the bootstrap), then belt-and-suspenders disable anything still enabled. The keepalive re-enables the bootstrap on teardown — though KWin also auto-re-enables it when our output is reclaimed, so there's never a zero-output window. Set in packaging/kde/host.env. Verified live on the Fedora 44 KDE box: mid-session the streamed output is the sole desktop at 0,0; post-session the bootstrap is back. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 21:04:29 +00:00
enricobuehler	7ec91aec2d	feat(punktfunk/1): cross-VLAN/NAT video via data-plane hole-punching ... The video data plane is a raw UDP socket separate from the QUIC control connection. On a flat LAN the host can send straight to the client, but across NAT or a stateful inter-VLAN firewall the unsolicited host→client video is rejected (ICMP port-unreachable → the session dies immediately, while control/audio/input keep working since they ride the client-initiated QUIC). Observed live: a client on 192.168.6.2 streaming from a host on 192.168.1.48. Fix: client-initiated hole-punching. The client sends PUNCH_MAGIC datagrams from its data socket to the host's advertised data port (Welcome.udp_port); that opens the firewall/NAT return path and lets the host learn the client's OBSERVED source (the NAT-translated address, not the client's reported private one). The host (UdpTransport::connect_via_punch) waits ≤2.5s for the first punch and streams there, falling back to the client-reported address for clients that don't punch (flat-LAN behaviour unchanged). The client keeps a low-rate keepalive so a stateful firewall's idle timeout can't close the path during a static, low-bitrate scene. Wired into client-rs and the NativeClient connector (covers the Linux + Apple clients; the Apple app needs an xcframework rebuild to pick up the new core). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 18:46:15 +00:00
enricobuehler	8970cfe188	style(vdisplay/mutter): drop trailing blank line (rustfmt --check) ... The stray blank line after build_primary_config tripped cargo fmt --all --check in CI. Formatting only, no code change. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 13:36:22 +00:00
enricobuehler	263eab31e3	fix(m3): release held mouse buttons/keys when a session ends (stuck-click after reconnect) ... The pointer/keyboard injector is host-lifetime (one EIS connection for every punktfunk/1 session), so its existing release_all only fires on EIS disconnect — never when a *client* session ends. A button still down at an abrupt client disconnect therefore stayed latched in the compositor: Mutter keeps the destroyed press's implicit pointer grab, so after reconnect a stuck left-button-down turns every motion into a drag (windows move, text selects) while a fresh click's press is swallowed — clicking buttons and text inputs does nothing. Only the one held button is affected; keyboard and the other buttons are fine, exactly as reported. Fix: input_thread now tracks the buttons/keys the client holds and, when the session ends, synthesizes the matching up-events through the host-lifetime injector (whose EIS connection — and the dangling grab — outlive the session). Backend-agnostic (normal inject path), so it covers libei/EIS, wlr and uinput alike. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 13:31:15 +00:00
enricobuehler	7ecf2d8dfd	fix(inject/libei): emit the continuous scroll axis so small scrolls register ... The libei backend forwarded mouse wheel only via scroll_discrete (120-per-detent). Mutter floors a sub-detent delta — a trackpad, a precise/high-res wheel, or a fractional smooth-scroll event — to zero whole clicks, so small scrolls never land and you have to spin the wheel a lot before anything moves. Emit the continuous `scroll` axis (logical px, ~15 px/detent) alongside the discrete steps, matching the wlroots backend's 15-px/notch behaviour, so every delta moves proportionally while full detents still drive line/page scrolling. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 12:37:07 +00:00
enricobuehler	55dfb4800f	fix(vdisplay/mutter): stop the teardown layout-restore from SIGSEGVing gnome-shell ... After a session ends, the Mutter backend (with PUNKTFUNK_MUTTER_VIRTUAL_PRIMARY=1) re-asserted the physical monitor layout with an explicit ApplyMonitorsConfig. On Mutter 50 + NVIDIA that monitor reconfig — issued while the just-removed high-refresh virtual output is still tearing down — SIGSEGVs gnome-shell. Observed live on home-worker-3: the teardown ApplyMonitorsConfig returns "recipient disconnected from message bus" (the shell died mid-call), GDM's crash-loop guard then drops to the greeter and STAYS there, so org.gnome.Mutter.RemoteDesktop/DisplayConfig vanish and every subsequent reconnect fails with RemoteDesktop.CreateSession ServiceUnknown — i.e. "after a disconnect I can't reconnect anymore." make_virtual_primary applies an APPLY_TEMPORARY config, which Mutter reverts on its own once the virtual output disappears and our DisplayConfig connection closes. So the explicit restore was both redundant and the crash trigger: drop it, drop the dc_pre connection at teardown, and let Mutter revert the temporary config itself. Setup is unchanged (the virtual output is still made primary so the desktop lands on the streamed surface). Removes the now-unused to_apply_logicals/apply_config helpers. Verified live on home-worker-3 (5120x1440@240, VIRTUAL_PRIMARY=1): 6/6 back-to-back connect/disconnect cycles streamed cleanly with gnome-shell holding the same PID throughout (previously it crashed within the first few disconnects). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 12:37:07 +00:00
enricobuehler	dad5a08c1f	chore(capture): tidy the GNOME flash diagnostic — it's the CORRUPTED skip ... Live confirmation on worker-3: the flash was Mutter's CORRUPTED, size-0 cursor-update buffers (chunk_flags=CORRUPTED) carrying recycled old frames — drained=1 always, so latest-frame-only draining wasn't the lever, the CORRUPTED skip was (OBS issue 8630). Demote the verbose drain diagnostic to a rate-limited debug line and document the root cause inline. Validated: zero-copy back on GNOME (dmabuf->CUDA, 5120x1440) AND flash-free with FORCE_SHM off. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 11:28:11 +00:00
enricobuehler	d8da12bbbd	fix(capture/mutter): latest-frame-only dequeue (the real GNOME flash fix) ... Deep research (OBS Studio's linux-pipewire, Mutter bug tracker) found the GNOME stale-frame flash is a buffer-RECYCLING race, not damage (Mutter sends whole frames, no SPA_META_VideoDamage) and not buffer count. OBS's proven fix is latest-frame-only dequeue: each process callback, drain ALL queued PipeWire buffers, requeue the older ones, and consume only the NEWEST — plus skip CORRUPTED buffers. Our code dequeued one buffer per callback (oldest-first) and the bounded channel dropped the NEWEST when full, so during Mutter's bursty delivery the encoder got stale frames → the flash. Switch the process callback to raw dequeue_raw_buffer + drain-to-newest (requeue older), extract the consume logic into consume_frame(spa_buf) sourcing datas via the transparent Data cast, skip SPA_META_HEADER_FLAG_CORRUPTED / CORRUPTED-chunk buffers (size-0 skip kept SHM-only so dmabuf isn't regressed), and remove the earlier content-hash drop heuristic (it couldn't tell stale re-deliveries from legit repeating content). Diagnostic logs drain depth + chunk/header flags. Reverts none of the FORCE_SHM / dmabuf_fence work. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 11:15:01 +00:00
enricobuehler	79508b2666	fix(capture/mutter): drop stale re-delivered frames (the GNOME flash) ... Instrumented worker-3: even on the ordered FORCE_SHM download path, Mutter re-delivers COMPLETE OLD pool buffers — 655 frames in a 15 s session whose content exactly matched an earlier frame (not damage-incremental; full old frames, in runs, ~45% during motion). NVIDIA gives no fence to prevent it, so the producer delivery can't be made clean from our side. Detect it and drop it: hash a spatial sample of each captured frame; a frame whose content equals an EARLIER distinct frame (vs the current one, whose duplicates pass through) is a stale re-delivery — skip it so the encoder never emits the flash (try_latest re-sends the last good frame; brief hold instead of a backward jump). Runs on the CPU/SHM path (where Mutter+NVIDIA capture lives); never triggers on static content or non-Mutter compositors (no reverts). PUNKTFUNK_KEEP_STALE=1 disables it for A/B. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 10:46:27 +00:00