5 Commits

Include renames

Author	SHA1	Message	Date
enricobuehlerandClaude Fable 5	d36bec6e9d	feat(core+host): negotiate ChaCha20-Poly1305 as the session cipher for soft-AES clients ... Lifts the ~100 Mbps decrypt ceiling on clients without hardware AES — the armv7 soft-AES targets (webOS TVs), where AES-128-GCM resolves to fixsliced software AES + software GHASH (~50-100 cpb) while ChaCha20-Poly1305's ARX construction runs ~10-17 cpb portable, a 4-7x lift that PyroWave-on-TV needs (design/chacha20-session-cipher.md). Phase 1 (core crypto, no wire change): SessionKey merges cipher choice and key material (invalid combinations unrepresentable, zeroize + redacted-Debug discipline kept); SessionCrypto dispatches both aead-0.5 ciphers per call — the salt||seq nonce scheme, per-direction salts, seq-as-AAD and replay window carry over verbatim (same 96-bit nonce / 16-byte tag, const-asserted). Config.key becomes SessionKey; validate's zero-key rejection follows the active variant. The C ABI keeps its fixed 16-byte key mapped to AES — no ABI_VERSION bump. Phase 2 (negotiation): VIDEO_CAP_CHACHA20 (0x40) — support-plus-request in one bit, the VIDEO_CAP_444 precedent. Welcome grows cipher@68 + key_chacha@69..101, emitted only when non-zero so an AES session's Welcome stays byte-identical to the pre-cipher form; decode is fail-closed (short key or unknown id -> Err, never a silent AES fallback). No WIRE_VERSION bump; downgrade resistance inherited from the pinned-TLS control channel. Phase 3 (host): grant only when the client advertised the bit and the PUNKTFUNK_CHACHA20 kill-switch (default on, documented) allows; fresh 32-byte per-session key from the same RNG discipline, legacy key field stays independently random; resolved cipher logged at session start. Verification: seal/open suites parameterized over both ciphers + a cross-cipher tamper case; Welcome roundtrip/truncation/fail-closed tests; ChaCha lossy-loopback soak (loss/replay is cipher-independent); bench gains _chacha20 series (AES ids unchanged for CI history) — host-side sealing line-rate-trivial on both x86 (~640 MiB/s) and Apple Silicon (~535 MiB/s). punktfunk-probe drives the interop matrix via PUNKTFUNK_CLIENT_CHACHA20=1 and logs the negotiated cipher. Phase 4 (pf-webos pin bump + unconditional cap bit) follows the next core release. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-21 22:50:00 +02:00
enricobuehlerandClaude Fable 5	cdbdc078d6	perf(core): ref-based FEC encode — packetize shards reference the frame in place ... Stage A of the zero-copy host packetize path (networking-audit deferred plan §1): ErasureCoder::encode now takes &[&[u8]], so Packetizer::packetize builds each block's data shards as slices straight into the frame buffer instead of allocating + copying a Vec per data shard. Only the frame's final (possibly partial) shard is staged in a reusable zero-padded scratch; blocks are consecutive shard ranges, so every other shard is a full payload-sized slice. - gf8: encode_sep() over the same Cauchy codec — parity byte-identical to nanors/Moonlight (nanors_exact_parity_vectors unchanged and green) - gf16: reed_solomon_simd::encode is already generic over AsRef<[u8]> - loss-harness sweep: recovery rates identical before/after - bench pipeline (end-to-end, host+client): gf8/64K -3.0%, gf16/64K -2.2%, gf16/1M -3.4%, gf8/1M -0.7% Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-10 15:16:07 +02:00
enricobuehlerandClaude Fable 5	eea23c5647	fix(core,host): make the native data plane survive real Wi-Fi links ... Root-caused live on a phone at 100 Mbps (stream stuck seconds behind, then oscillating): a stack of transport defects, each amplifying the next. - MTU-safe shards: shard_payload 1452 overshot the IPv4/1500 budget (the old math forgot the 40 B header + 24 B crypto ride inside the UDP payload and counted IP+UDP as 8 B) — the kernel silently split EVERY video datagram into two IP fragments, doubling per-datagram loss on Wi-Fi. New config::mtu1500_shard_payload() = 1408 (1472 sealed = the exact ceiling), negotiated in the Welcome, pinned by a unit test. - Android batched I/O: recv/send batching was cfg(linux); Android is target_os="android" and silently fell back to a syscall per datagram. The libc crate binds neither recvmmsg/sendmmsg nor mmsghdr for Android, so a local bionic extern binding provides them (API 21+, floor is 28); cbindgen excludes them from the C header. The pump/runtime threads also get the Apple-QoS analogue on Android: nice −8 (below the decode thread's −10). - Latency-bounded receive: packets are consumed strictly in order at exactly the arrival rate, so a standing queue (Wi-Fi stall, power-save clumping) NEVER drains — observed as a stream permanently 6-7 s behind with both 32 MB socket buffers full. The pump now flushes the entire backlog (Session::flush_backlog: discard ring + kernel queue at memcpy speed, reset the reassembler) and requests a keyframe when frames keep completing > 400 ms behind the skew-corrected capture clock (30 consecutive, 2 s cooldown, logged). - Time-based loss window: the reassembler declared an incomplete frame lost a fixed 4 INDICES behind the newest — 33 ms at 120 fps, inside normal Wi-Fi retry/reorder timescales, so merely-late frames were pruned every few seconds, each costing a recovery-IDR burst + an inflated loss report. Now 120 ms of capture time (LOSS_WINDOW_NS), same fuse at every refresh rate, with a 64-index hard cap bounding memory against hostile pts. - Adaptive-FEC hysteresis: the controller was memoryless — one clean 750 ms report dropped FEC from 8 % straight back to the 1 % floor, so periodic burst loss (Wi-Fi scan / BT coexistence beats) always hit an unprotected stream and ping-ponged 1↔8 % with a frozen frame per cycle (observed in the host log as alternating loss_ppm=0/50000). Attack stays instant; decay is now one point per clean report. Verified: full core suite (incl. new flush + time-window tests) on macOS + Linux, host release build, arm64 cargo-ndk build, and a 30 s wired probe run at 2800x1260@120 — 3559/3559 frames, zero loss, capture→received p50 5.3 ms (host 5.1 + network 0.3). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-07 07:35:08 +02:00
enricobuehlerandClaude Opus 4.8	2f2147b093	refactor: drop milestone names + consolidate clients; loss-recovery & rumble fixes ... Two bodies of work in one commit (the rename moved files the fixes also touched). Naming/structure cleanup (pre-launch): - Host modules m3.rs->punktfunk1.rs, m0.rs->spike.rs; CLI m3-host->punktfunk1-host, m0->spike; bare `punktfunk-host` now prints help. Types M3Options/M3Source-> Punktfunk1Options/Punktfunk1Source. - Clients consolidated out of crates/ into clients/: punktfunk-client-rs-> clients/probe (crate punktfunk-probe), client-linux->clients/linux, client-windows->clients/windows, punktfunk-android->clients/android/native (crate punktfunk-client-android; kept [lib] name=punktfunk_android so the JNI contract is unchanged). crates/ now holds only core + host. - Milestone codes M0-M4 purged from code/CLI/CLAUDE.md/README/docs/docs-site, kept only in docs/implementation-plan.md. docs/m2-plan.md-> docs/gamestream-host-plan.md. CI/gradle/flatpak paths updated. Client loss-recovery (video froze and never recovered after a brief drop): - Export punktfunk_connection_frames_dropped through the C ABI (the core already tracked it for the client keyframe-recovery loop; it was never reachable from the ABI clients). Regenerated punktfunk_core.h. - Apple (StreamPump + Stage2Pipeline) and Android (decode.rs) now poll frames_dropped and request a keyframe when it climbs -- the same loss-driven recovery Linux/Windows already had. Under infinite GOP the decoder silently conceals reference-missing frames, so the decode-error trigger rarely fires. Apple rumble robustness (worked then went spotty -- DualSense + Xbox): - Add CHHapticEngine stopped/reset handlers (rebuild on app background / audio interruption / server reset) and drop the permanent `broken` latch on a transient drive failure; latch only when the controller truly has no haptics. - Surface swallowed SDL set_rumble errors on Linux/Windows + diagnostic logging. Verified: cargo build/clippy/fmt --workspace, C-ABI harness, header drift. Not runnable on this box (verify in CI): Gitea workflows, gradle/Android, flatpak, Swift/decky. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-18 21:05:58 +00:00
enricobuehlerandClaude Opus 4.8	8cceb93541	rename: lumen → punktfunk, everywhere ... Full project rename, decided 2026-06-10: - Crates/binaries: punktfunk-core / punktfunk-host / punktfunk-client-rs. - C ABI: punktfunk_* symbols, Punktfunk* types, include/punktfunk_core.h, PUNKTFUNK_FEATURE_QUIC guard (header regenerated; cbindgen renames updated, incl. PUNKTFUNK_BTN_*/PUNKTFUNK_AXIS_* wire constants). - Protocol: punktfunk/1 — control-plane magic LMN1 → PKF1, nonce salt lmn1 → pkf1. WIRE BREAK: clients must be rebuilt from this revision. - Env knobs: PUNKTFUNK_VIDEO_SOURCE / PUNKTFUNK_COMPOSITOR / PUNKTFUNK_ZEROCOPY / …. - Host config dir: ~/.config/punktfunk (the box's dir was migrated in place — the persistent identity is unchanged, pinned fingerprints stay valid). - Swift package: PunktfunkKit + PunktfunkCore.xcframework + PunktfunkConnection (Sources/PunktfunkClient app + tests renamed with it); build-xcframework.sh updated. - scripts/: 60-punktfunk.rules, punktfunk-host.service; OpenAPI doc regenerated. Also: scripts/headless/run-headless-kde.sh — full headless Plasma bringup. Root cause of "desktop but no apps/settings" over the stream: plasmashell launched without XDG_MENU_PREFIX=plasma-, so the launcher resolved a nonexistent applications.menu and rendered an empty menu. The script sets the complete KDE session env (menu prefix, KDE_FULL_SESSION, session version) and rebuilds ksycoca before starting plasmashell. Gate: 97/97 tests, clippy -D warnings (both feature sets), fmt, C-ABI harness PASS, zero lumen references left outside .git. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-10 13:11:59 +00:00