12 Commits

Include renames

Author	SHA1	Message	Date
enricobuehler	9fb41affba	fix(clients/settings): a controller setting you can't use no longer looks like one you can ... Turn "Forward controllers" off and four rows below it stop meaning anything — nothing is forwarded, so there is no pad type to pick and no guide button to route. GTK desensitised them, the touch settings on both mobile clients dimmed them and the console UI refused the step; the Windows client and BOTH controller-navigable screens left them fully live, so you could sit there changing settings that did nothing. Windows: `.enabled(s.gamepad_forwarding)` on the forwarded-controller picker, pad type, guide button and hold-Select rows — the same builder the echo-cancellation row already used to follow the mic switch. Apple's gamepad settings had no way to say it: `Row` carried `adjustable` (which only hides the chevrons) and nothing else. Added `Row.enabled`, dimmed the row CONTENTS only so the glass still reads as a focusable row, and enforced the inertness centrally in `adjust(id:)` / `activate(id:)` rather than in each builder's closure. The hint bar drops "Adjust"/"Change" on a dimmed row, because advertising them was the same lie the live row told. Android's gamepad settings already had `GpRow.enabled` — documented as "dimmed + inert" — but it only faded the label: every dimmed row still stepped and still wrote its setting. The "No profiles yet" placeholder looked inert only because its own closures were empty. Made it real in one named place (`liveRow`), covering all three input paths (left/right, A, and a tap on the already-focused row), then gated the pad rows on it. Also on that screen: the DualSense / DualShock passthrough toggle, which the touch settings have carried beside its SC2 twin all along. It was missing exactly where it matters most — a TV box has no touch interface to fall back to, so there was no way to reach it at all. Apple capture, separately: with forwarding off, opening a slot still claimed EVERY element's system gesture and powered the controller's IMU. Neither reaches the host, so the first only took the user's screenshot/Home gestures away for nothing and the second drained the pad's battery streaming gyro over Bluetooth. Narrowed rather than skipped — the escape chord is read off the same slot and on tvOS is the ONLY controller way out of a stream, so the chord's own four buttons keep their claim. A test pins the alias list against the chord mask; if they drift the symptom is a session nobody can leave, with nothing logged. Closes R17, R18, R19 (design/haptics-sweep-2026-08-03.md M11). R17 as filed named Windows and "Apple"; Apple's TOUCH settings were already correct and Android's controller-navigable screen was not — both corrected here. Verified: Windows clippy -D warnings exit 0 on a real Windows box; Apple swift build clean + full suite 192 tests / 0 failures (3 new); Android :app: + :kit: green (5 new); cargo fmt --all --check clean. Each fix probed by reverting it — every probe failed the tests it should.	2026-08-04 22:25:51 +02:00
enricobuehler	1db7058a5d	feat(clients/input): system buttons route around local overlays ... Pressing guide/Steam/QAM collided with the client device's own shell: iOS 26 opens its Game Overlay for the Home press (no app opt-out until iOS 27 makes it a user setting), and a Gaming-Mode client opened BOTH Steam overlays for one press — the local one covering the stream. Two cross-client tier-P settings, zero wire changes: - system_buttons (auto|forward|local): raw guide+misc1 passthrough. Auto forwards everywhere EXCEPT under gamescope, where SteamOS reacts to the same physical press no matter what. - guide_gesture (auto|on|off): hold Select ALONE ~350ms sends the HOST's guide, down until release — held on, that's the host's long-press, which opens a Gaming-Mode host's QAM for regular pads. A Select tap is delivered on release with its up TAP_PRESS (50ms) behind, because per-transition sends fold into seq'd GamepadState snapshots and a back-to-back pair can coalesce into no press at all. A Select inside a combo (the escape chord) passes through untouched. Auto arms it only where the raw press can't reach the host cleanly: gamescope, iOS/iPadOS, tvOS. The same SelectGesture rules live in pf-client-core (pure state machine + unit tests), the Apple client (mask-diff adaptation in GamepadCapture), and Android's GamepadRouter. Settings rows on every surface (GTK, WinUI, console UI, Decky, Apple x2, Android x2) with profile plumbing throughout. punktfunk-session grows a control socket ($XDG_RUNTIME_DIR[/app/$FLATPAK_ID]/punktfunk-session-ctl.sock — the one runtime path a flatpak and the host see identically): 'guide'/'qam' verbs inject synthetic taps. The Decky panel gains a Host menus section (visible while the client runs) whose buttons press the host's Steam/QAM and close the local menu so the host's shows through. iOS 27's GCControllerHomeButtonSettingsManager deep-link is a TODO (the class needs the Xcode 27 SDK to compile). Docs: input, client-settings, steam-deck. Design: punktfunk-planning design/system-buttons-routing.md. Gates: docker clippy --all-targets --locked -D warnings + tests (pf-client-core 88 incl. 6 new gesture tests, pf-console-ui 47), cargo fmt --all --check, swift build (macOS), gradle kit+app compile, decky tsc --noEmit + py_compile. clients/windows not compiled (no box).	2026-08-04 21:46:27 +02:00
enricobuehlerandClaude Opus 5	b297542c4d	feat(clients/input): controllers can stop being forwarded, for couches that hand the pad over another way ... A controller that reaches the host by USB passthrough — VirtualHere and friends, or simply a pad plugged into the host — arrived there twice: once as the real device, once as the virtual pad this client built from the same hands. Games read both, so a stick drifts against the centred second pad and menus take every input twice. New per-client setting, "Forward controllers", default on (today's behaviour). It is tier-P, so a profile can decline what another profile forwards. On Linux and Windows it is deliberately stronger than "send nothing". Opening a controller is what CLAIMS it — SDL's HIDAPI drivers take the device node — and a claimed device is one a passthrough tool cannot bind, so with this off the session opens no slot at all and never enables the Valve HIDAPI drivers. Menu navigation is untouched: the launcher still opens the active pad, and a session supersedes menu mode whether it forwards or not, so the pad is free for the whole time a stream is up. The consequence, documented at both the setting and the chord: the controller escape chord is read off forwarded pads, so it is unavailable there. The Apple and Android input stacks claim nothing, so those clients keep their slots and their chords and only gate the wire sends — losing tvOS's only controller way out of a stream would have been the worse bug. Android does stop its DualSense and Steam Controller 2 USB captures, which do claim the device. Surfaces: GTK, WinUI, the console settings screen, Apple's touch and gamepad settings, the Android touch and gamepad settings, and Decky (which also hides the rows that now have nothing to act on). Everywhere the "which pad" and "pad type" rows grey out while it is off. Verified: cargo clippy --all-targets -D warnings + 79 tests on pf-client-core, pf-console-ui, punktfunk-client-session and punktfunk-client-linux (linux/amd64 container, gate proven non-vacuous with a planted error); swift build for the Apple clients; gradle compile + 49 unit tests for Android (likewise proven); tsc for Decky. clients/windows is UNCOMPILED — both Windows boxes were offline; its edits were reviewed against the helper signatures by hand. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-02 22:21:26 +02:00
enricobuehlerandClaude Opus 5	0d9d78398c	fix(drivers/windows): name each virtual pad for what it is — one shared description read as "the setting did nothing" ... `pf_dualsense.inx` gave all four hardware ids a single %DeviceDesc%, so Device Manager labelled an emulated DualShock 4, DualSense Edge and Steam Deck pad "punktfunk Virtual DualSense". The HID layer was always per-type — device_type picks the PID (09CC for DS4), the report descriptor and the product string — but the one place a user goes to check said DualSense for every choice, which reads exactly like the controller-type setting being ignored. Split into four model lines over the same install section, one description each. No binding, service or descriptor change; stampinf's 9.9.MMdd.HHmm DriverVer increments on every build, so pnputil takes the update. InfVerif on the WDK runner: INF is VALID. Also correct the Slot.pref comment from the previous commit: emulating a DualShock 4 gives up adaptive triggers by construction. HidOutput::Trigger is emitted only by dualsense_proto, and a DS4 has no trigger-effect reports — the host never generates any to send. Rumble and the lightbar remain. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-26 16:56:44 +02:00
enricobuehlerandClaude Opus 5	6edd700910	fix(client/gamepad): honor an explicit controller type — the per-pad arrival was re-declaring the physical pad ... The "Controller type" setting reached the Hello and stopped there. Every pad then opened with a GamepadArrival carrying its DETECTED kind, and the host builds each virtual device from that arrival — the session default is only the fallback for a pad that never declares one. So "emulate my DualSense as a DualShock 4" put a DualSense on the host the instant the controller connected, and no amount of reconnecting helped. Apple and the native clients both; Android already applied the setting per pad. The setting now rides the declaration too: explicit wins for every slot, Automatic keeps per-pad detection so a mixed session stays honest. The physical kind still drives the LOCAL feedback paths — a DualSense emulated as a DualShock 4 keeps its lightbar and adaptive triggers, and a Deck keeps its rumble keep-alive. Regressed in 97c67b26 / 76be4c3e (multi-controller support); ships in 0.19.x. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-26 16:56:44 +02:00
enricobuehlerandClaude Opus 4.8	26cac9ce20	fix(gamepad): truncate stick/trigger axes uniformly across clients (G25) ... Apple's GamepadCapture rounded axis values (`(v * scale).rounded()`) while SDL-core and Android truncate, so a half-pressed control emitted 128 on Apple vs 127 elsewhere. Drop `.rounded()` so `Int32(Float)` truncates toward zero on Apple too; rails are unchanged (full deflection stays 255 / ±32767). Also clamp SDL-core's LeftX/RightX to a symmetric -32767 like the Y axes and the other clients already do, instead of letting the raw i16 reach -32768. Verified: Apple `swift build` + full PunktfunkKit suite (124 pass); SDL half on Windows .173 `cargo clippy -p pf-client-core -- -D warnings` (green). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-13 22:05:13 +02:00
enricobuehlerandClaude Opus 4.8	68b9f108ab	feat(gamepad/apple): send Share/Create as BTN_MISC1 + pin wire bits to the C ABI ... G5: buttonMask mapped the dedicated share/create/capture element onto BTN_BACK, the same bit as View (buttonOptions). On an Xbox-Series pad those are two distinct physical buttons, so Share was indistinguishable from View on the host and never delivered the capture bit the host already decodes (DualSense mute / Steam quick-access). Route it to BTN_MISC1 instead, matching the Rust client's `Button::Misc1 => wire::BTN_MISC1`. Adds `misc1` to GamepadWire and allButtons so a held capture button is released on flush like the others. (On-glass verify owed on a real Xbox-Series pad; a clone pad that exposes one button as both buttonOptions and Share now emits back+misc1 for it — harmless on a plain xpad session and rare otherwise.) G22 (partial): define paddle1..4 for wire completeness, but leave them out of buttonMask/allButtons until the GameController paddleButton1..4 ↔ BTN_PADDLE physical correspondence is confirmed on a real Elite pad. G15: replace the 3-bit spot-check with an exhaustive assertion of every GamepadWire button/axis constant against the generated C ABI header (punktfunk_core.h), so any Swift-side drift from punktfunk_core::input::gamepad fails CI. swift build + full PunktfunkKit suite green (124 passed, 5 skipped). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-13 11:14:26 +02:00
enricobuehlerandClaude Opus 4.8	5cd66eca59	fix(gamepad/apple): stop releasing held guide on concurrent input ... `sync()` XOR-diffs the full `GamepadWire.allButtons` set (which includes guide) against `slot.buttons`, but `buttonMask` deliberately omits guide — it's driven separately by the Home handler via `sendGuide`. So while guide was physically held, the first stick/trigger/face-button move made `changed` carry the guide bit and the diff loop emitted a spurious guide-UP (then the real release was swallowed by `sendGuide`'s `guard now != slot.buttons`). Effect: you could not hold PS/guide while doing anything else — e.g. holding guide to keep the host's Steam overlay engaged released it the instant you touched a stick. The Rust reference client folds guide through the same diff as every other button and has no such split. Fix: preserve the current held guide bit through the diff (`buttonMask(g) | (slot.buttons & GamepadWire.guide)`) so guide is never seen as "changed"; `sendGuide` stays the sole toggler and `flush`/`allButtons` still release it on close/deactivation. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-13 11:12:47 +02:00
enricobuehlerandClaude Opus 4.8	97c67b2692	feat(apple): multi-controller support ... Roll the pf-client-core slot pattern to the Apple client (Swift): - GamepadManager tracks all connected GCControllers, assigning each a stable lowest-free wire pad index + concrete type, emitting GamepadArrival on connect and GamepadRemove on disconnect (index freed for reuse on re-plug). - GamepadCapture binds every controller with per-controller Slot state (buttons/axes/fingers/motion), threading the pad index into flags on every event; GamepadWire/InputEvents carry the pad + the two new events. - GamepadFeedback + RumbleRenderer go per-pad (rumbleByPad, slots[pad]), routing rumble/HID back to the correct controller by wire index. - ContentView/Settings surface every forwarded controller. pad 0 => flags 0, so single-controller wire is byte-identical. Cannot build on the Linux dev box (no Swift toolchain / Apple frameworks); wire bytes hand-checked against input.rs and GamepadWireTests extended for multi-pad. CI apple.yml (swift build/test on macOS) is the compile gate. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-12 21:53:07 +02:00
enricobuehlerandClaude Fable 5	3ba19f28a2	feat(apple): the gamepad UI comes to tvOS - focus-driven, with real session controls ... The console UI now runs on tvOS through the NATIVE focus engine: carousel cards and settings rows are focusable Buttons (Siri Remote and pads both navigate; imperative scrollTo replaces the drop-prone scrollPosition binding), while iOS/macOS keep the 60 Hz poll untouched - on tvOS it carries only what focus has no concept of: X/Y screen actions and left/right value adjust with the poll's dominant-axis feel (onMoveCommand proved input-source-dependent: keyboard intercepted, pad dpad not -> double steps). Text entry uses the system fullscreen keyboard (TVTextEntry); pairing + library present as covers under the launcher; the game library defaults ON; settings values slide a quiet 14 pt in the step's direction. Session controls: controller/remote input routes EXCLUSIVELY through GameController during a stream (GCEventViewController, interaction disabled) - a pad's B no longer doubles as a UIKit menu press that ended sessions mid-game. Deliberate exits only: the cross-client escape chord (hold L1+R1+Start+Select 1.5 s - pf-client-core's contract, now implemented on all Apple platforms) and holding the remote's Back >= 1 s; the start-of-stream banner (now also on tvOS) teaches both. The Siri Remote's touch surface drives the host pointer - press = left click, Play/Pause = right click, release-tail jumps gated so motion stays truly relative. tvOS 26 regressions fixed at the root: the app-wide brand tint rendered every unfocused control as a blank pill (tint dropped on tvOS) and the 17 pt root font shrank the whole platform (29 pt there), plus 10-foot sizing across host cards, the gamepad screens, and the stats HUD (whose misleading "Press Menu" hint is gone). Acknowledgements scrolls by focus-sized chunks and Menu pops instead of suspending; full-width focusSections make the home actions reachable from any column. The presenter defaults to stage-3 glass pacing on tvOS (a 60 Hz panel fed a 60 fps stream is the sticky-FIFO worst case behind the 50 ms display stage) and is pickable from the gamepad settings; HDR capability advertises from AVPlayer.eligibleForHDRPlayback instead of the current mode's EDR headroom, so an SDR home screen no longer hides an HDR TV. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-10 16:59:01 +02:00
enricobuehlerandClaude Fable 5	a35a761c37	feat(apple/gamepad): claim controller system gestures during capture — PS button opens the Steam overlay, share/create stops screenshotting locally ... While a pad drives a stream, GamepadCapture now sets EVERY element's preferredSystemGestureState to .disabled (restored to .enabled on unbind). iOS/macOS attach system gestures to several controller buttons — share/create took a LOCAL screenshot instead of reaching the game, and only the Home element was opted out before. With the gestures claimed, the already-wired chains do their job: PS/Home → wire guide → BTN_MODE on the virtual xpad (the Steam-overlay button) / the PS bit on the virtual DualSense. Also fold the share/create/capture element (GCInputButtonShare) into the back/select wire bit — clone pads like the GameSir G8 expose their screenshot button only as the share element, not buttonOptions (OR onto the same bit, so double-exposed pads are harmless). The G8's other extra button (M) is a firmware-local modifier (turbo/hair-trigger/swap) invisible to the OS. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-02 23:36:16 +02:00
enricobuehlerandClaude Fable 5	34fe896ade	feat(apple): gamepad UI v2 — controller settings + add host, aurora, macOS ... Sources reorganized (client: Home/Session/Settings/Stores/Support/Trust; kit: Audio/Connection/Gamepad/Input/Support/Video/Views) with the big files split along the same seams. The gamepad mode is couch-complete, and now on macOS too (the living-room Mac case), not just iOS/iPadOS: - GamepadSettingsView: a console-style, fully controller-navigable settings screen (X from the launcher) — up/down moves focus, left/right steps values (clamped, boundary thud), A cycles/toggles, B closes; the focused row shows a one-line description. Backed by GamepadMenuList, the vertical sibling of GamepadCarousel, and SettingsOptions — the option lists hoisted out of SettingsView statics and shared by the touch, tvOS and gamepad settings. - GamepadAddHostView + GamepadKeyboard: register a host end to end with a pad — field rows open an on-screen controller keyboard (dpad grid, A types, X backspaces, B done); the launcher carousel ends in an Add Host tile, so the dead-end "add one with touch first" empty state is gone. - Launcher polish: contextual hint bar with the pad's real button glyphs, controller name + battery chip, one shared console chrome. - GamepadScreenBackground: an animated aurora (TimelineView-driven drifting blobs in the brand's violet family, breathing radii, slow hue shift, legibility scrim; freezes under Reduce Motion). Pure SwiftUI on purpose — a .metal library only bundles reliably in one of the two build systems (SPM vs the xcodeproj's synced folders) these sources compile under. - macOS port: settings/add-host/library present as sized sheets (a macOS sheet takes its content's IDEAL size, and the GeometryReader-driven screens collapsed to nothing), NSScreen-based mode lists, scroll indicators .never (the "always show scroll bars" setting overrides .hidden), tray scrims so scrolled rows dim under the pinned title/hints, extra title clearance, and a PUNKTFUNK_FORCE_GAMEPAD_UI=1 dev hook — launcher/settings/add-host/keyboard/ library render-verified live on a real Mac + LAN hosts. - GamepadMenuInput: X button support, and (re)start now snapshots held buttons so a controller handoff press never fires twice (the B that closed the keyboard no longer also cancels the screen underneath). - Cleanups: one "Connection failed" alert in ContentView instead of one per home screen; HostDiscovery.advertises/unsaved shared by both home screens. - host: can_encode_444 stub for the non-Linux/Windows host build (the macOS synthetic-source loopback used by the Swift tests). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-02 11:24:44 +02:00