3 Commits

Include renames

Author	SHA1	Message	Date
enricobuehler	bf913c5706	fix(apple): switching audio device mid-stream killed the sound for the rest of the session ... Field report, macOS client, host-independent: start a stream with AirPods in, take them out — nothing on the speakers; put them back in — nothing in the AirPods either. Only restarting the whole stream brought audio back. An AVAudioEngine does not follow the audio hardware. When the output device changes under a running engine, its IO unit sees the new hardware, THE ENGINE STOPS ITSELF, and it posts AVAudioEngineConfigurationChange. It stays stopped until somebody starts it again, and nothing here ever did — no error, no log line, just a session rendering silence from that moment on. Putting the AirPods back in is a second stop, not a recovery, which is exactly why that half of the report looked so strange. Measured on the client's own playback topology (source node -> main mixer, 48 kHz stereo) by moving the default output device programmatically: render callbacks go from ~94/s to zero the instant the device changes, and both restarting the same engine and building a fresh one resume them. The fix watches the hardware and rebuilds the topology the session was started with, on whatever device is there now. Three triggers, because no single one covers the ground: - the engine's own configuration-change notification, every platform — the direct signal, but it can only be posted BY an engine, so it cannot report a rebuild that failed to start; - a CoreAudio HAL default-output-device listener on macOS — independent of any engine and of the engine's topology. This is what makes the recovery work for the voice-processing engine, which is the DEFAULT macOS configuration (mic and echo cancellation both default on) and whose notification behaviour could not be verified: no Mac in the fleet can initialize VPIO at all; - route-change and media-services-reset on iOS/tvOS, where the session rather than the device is what moves. The route observer is now installed for mic-off (.playback) sessions and on tvOS too — it used to be iOS-and-mic-only, for the earpiece steer, but every platform has engines a route change can stop. They collapse into one debounced rebuild (one switch produces a burst), with a floor between rebuilds so a device that renegotiates in a loop cannot spin the session, and a short retry ladder for a device caught mid-transition — a rebuild that fails leaves no engine to post the next notification, so that path must not simply give up. The ring is deliberately carried across: the drain thread keeps decoding through the switch, and the ring's overflow policy has already dropped whatever went stale while the engine was down. A rebuild is only ever done when it concerns us. A healthy engine that followed the change on its own is left alone, and somebody changing the system default while this session is pinned to a named speaker is none of our business — rebuilding for that would cost an audible gap for nothing. The trigger wiring is split into AudioDeviceWatcher for one reason: an end-to-end test of the recovery needs a live session, which needs a host, and punktfunk-host does not build on macOS — so the part where a silent failure costs the session ALL of its audio would otherwise ship unverified. On its own the watcher is pointed at the real hardware from a unit test: a real default-output-device move must reach the owner, our engine's notification must get through, a foreign engine's must not. Neutralizing the wiring fails both positive tests and neither negative one. AudioDeviceSwitchTests drives the real SessionAudio through the out-and-back switch against the loopback host; it skips wherever that fixture cannot run (which is every Mac, today) and the open host's frame budget is raised so it outlives the switch.	2026-08-09 11:03:10 +02:00
enricobuehlerandClaude Opus 4.8	e56470cf56	fix(apple-client/audio): capture the right channel of a multi-channel mic + diagnostics ... The mic uplink handed the host pure digital silence on a multi-channel interface: AVAudioConverter's N→stereo downmix takes channels 0/1, but a pro interface puts the mic on ONE higher discrete channel. Fold the input to a mono bus ourselves instead — pick the mic's channel (or sum all) and resample that to the encoder's 48 kHz stereo, so the silent 0/1 downmix never happens. - New "Microphone channel" setting (macOS): Auto (sum every channel — a lone hot mic passes at full level) or pin 1-based channel N. Picker appears only for multi-channel devices, driven by the device's input channel count. - Diagnostics that make this class of failure self-naming next session: log the actual live capture device + format + fold mode, warn on a silent UID fallback, and a one-shot silence tripwire on the EXTRACTED signal (WARN on 10 s of zeros, else peak dBFS). - foldToMono extracted as a pure, unit-tested helper (pin / sum-clamp x interleaved / deinterleaved / mono / out-of-range). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-04 00:36:35 +02:00
enricobuehlerandClaude Fable 5	34fe896ade	feat(apple): gamepad UI v2 — controller settings + add host, aurora, macOS ... Sources reorganized (client: Home/Session/Settings/Stores/Support/Trust; kit: Audio/Connection/Gamepad/Input/Support/Video/Views) with the big files split along the same seams. The gamepad mode is couch-complete, and now on macOS too (the living-room Mac case), not just iOS/iPadOS: - GamepadSettingsView: a console-style, fully controller-navigable settings screen (X from the launcher) — up/down moves focus, left/right steps values (clamped, boundary thud), A cycles/toggles, B closes; the focused row shows a one-line description. Backed by GamepadMenuList, the vertical sibling of GamepadCarousel, and SettingsOptions — the option lists hoisted out of SettingsView statics and shared by the touch, tvOS and gamepad settings. - GamepadAddHostView + GamepadKeyboard: register a host end to end with a pad — field rows open an on-screen controller keyboard (dpad grid, A types, X backspaces, B done); the launcher carousel ends in an Add Host tile, so the dead-end "add one with touch first" empty state is gone. - Launcher polish: contextual hint bar with the pad's real button glyphs, controller name + battery chip, one shared console chrome. - GamepadScreenBackground: an animated aurora (TimelineView-driven drifting blobs in the brand's violet family, breathing radii, slow hue shift, legibility scrim; freezes under Reduce Motion). Pure SwiftUI on purpose — a .metal library only bundles reliably in one of the two build systems (SPM vs the xcodeproj's synced folders) these sources compile under. - macOS port: settings/add-host/library present as sized sheets (a macOS sheet takes its content's IDEAL size, and the GeometryReader-driven screens collapsed to nothing), NSScreen-based mode lists, scroll indicators .never (the "always show scroll bars" setting overrides .hidden), tray scrims so scrolled rows dim under the pinned title/hints, extra title clearance, and a PUNKTFUNK_FORCE_GAMEPAD_UI=1 dev hook — launcher/settings/add-host/keyboard/ library render-verified live on a real Mac + LAN hosts. - GamepadMenuInput: X button support, and (re)start now snapshots held buttons so a controller handoff press never fires twice (the B that closed the keyboard no longer also cancels the screen underneath). - Cleanups: one "Connection failed" alert in ContentView instead of one per home screen; HostDiscovery.advertises/unsaved shared by both home screens. - host: can_encode_444 stub for the non-Linux/Windows host build (the macOS synthetic-source loopback used by the Swift tests). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-02 11:24:44 +02:00