10 Commits

Author	SHA1	Message	Date
enricobuehler	55dfb4800f	fix(vdisplay/mutter): stop the teardown layout-restore from SIGSEGVing gnome-shell ... After a session ends, the Mutter backend (with PUNKTFUNK_MUTTER_VIRTUAL_PRIMARY=1) re-asserted the physical monitor layout with an explicit ApplyMonitorsConfig. On Mutter 50 + NVIDIA that monitor reconfig — issued while the just-removed high-refresh virtual output is still tearing down — SIGSEGVs gnome-shell. Observed live on home-worker-3: the teardown ApplyMonitorsConfig returns "recipient disconnected from message bus" (the shell died mid-call), GDM's crash-loop guard then drops to the greeter and STAYS there, so org.gnome.Mutter.RemoteDesktop/DisplayConfig vanish and every subsequent reconnect fails with RemoteDesktop.CreateSession ServiceUnknown — i.e. "after a disconnect I can't reconnect anymore." make_virtual_primary applies an APPLY_TEMPORARY config, which Mutter reverts on its own once the virtual output disappears and our DisplayConfig connection closes. So the explicit restore was both redundant and the crash trigger: drop it, drop the dc_pre connection at teardown, and let Mutter revert the temporary config itself. Setup is unchanged (the virtual output is still made primary so the desktop lands on the streamed surface). Removes the now-unused to_apply_logicals/apply_config helpers. Verified live on home-worker-3 (5120x1440@240, VIRTUAL_PRIMARY=1): 6/6 back-to-back connect/disconnect cycles streamed cleanly with gnome-shell holding the same PID throughout (previously it crashed within the first few disconnects). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 12:37:07 +00:00
enricobuehler	92c6da9546	fix(capture/mutter): restore zero-copy + sync via dmabuf implicit fence ... The previous attempt (8531135) dropped zero-copy on Mutter+NVIDIA for a sticky CPU/SHM fallback that (a) still listed SPA_DATA_DmaBuf in its buffer types, so Mutter kept handing dmabufs that got mmap-read UNsynced — making the flashing worse, not better — and (b) hinged on producer explicit sync, which Mutter+NVIDIA cannot do (`error alloc buffers` / no cogl sync_fd, confirmed in worker-3 logs). Revert the capture restructure to the original zero-copy dmabuf path, and fix the NVIDIA stale-frame race the RIGHT way for a producer that can't do explicit sync: the consumer snapshots the dmabuf's implicit fence (DMA_BUF_IOCTL_EXPORT_SYNC_FILE) and waits the producer's render before sampling (new dmabuf_fence module, ioctl number unit-tested). Covers the GPU import and the CPU mmap read. Logs once whether a render was actually in flight (waited=true → the driver fences and the race is closed; false → no implicit fence, so we learn zero-copy still needs SHM here). drm_sync (the explicit-sync primitive) is kept and verified but marked unused — no targeted compositor produces a usable sync_fd today; ready to wire in when one does. The Bug-2 input fix (held-key release on disconnect) from 8531135 is kept. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-13 09:28:17 +00:00
enricobuehler	8531135bb7	fix(capture/mutter): stale-frame flashes + stuck input after disconnect on GNOME ... Deep dive into the two GNOME-only host bugs (KWin/gamescope clean): 1. Stale-frame flashes (windows at old positions, typed text reverting): Mutter renders its virtual monitors DIRECTLY into the PipeWire buffer pool, and NVIDIA has no implicit dmabuf fencing — our zero-copy import raced the render and encoded each pool buffer's PREVIOUS contents. Fix, in order of preference: - Consumer-side PipeWire explicit sync (SPA_META_SyncTimeline): new drm_sync module (DRM timeline-syncobj wait/signal via raw ioctls, unit-tested incl. a live signal->wait round trip); announced post-format via update_params (the OBS pattern — at connect time the meta makes producers fail allocation, observed on KWin), with a blocks=3 Buffers filter so the producer's sync pod wins; acquire point awaited before any read (GPU import or CPU mmap), release point signaled on every path. - Where the producer can't do explicit sync (Mutter on NVIDIA today: no cogl sync_fd, "error alloc buffers"), a sticky fallback flips the capture to the synchronous CPU/shm path — Mutter's glReadPixels download orders against its render, so frames are correct by construction. First session pays one ~10 s probe+retry; later sessions go straight there. Validated live on home-worker-3 (GNOME 50 + RTX 4090): clean fallback, 30 MB HEVC streamed. - Sync is only announced on Mutter sessions (new VirtualOutput.mutter tag): KWin+NVIDIA fails allocation when merely asked, and doesn't need it (verified unchanged: zero-copy CUDA import + 1.1 MB/10 s). PUNKTFUNK_EXPLICIT_SYNC=0 disables the probe outright. 2. Clicks wedged in the focused app after disconnect+reconnect: a client vanishing mid-press left keys/buttons latched in the compositor — Mutter keeps the destroyed EIS device's implicit grab and the focused app stops taking clicks until restarted. EiState now tracks held keys/buttons/touches (wire codes) and synthesizes releases through the normal inject path before the EIS connection goes away. GNOME hosts on NVIDIA temporarily lose zero-copy (correctness over throughput); the moment Mutter+driver gain working explicit sync, the sync path engages automatically and zero-copy returns. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-06-13 00:34:42 +00:00
enricobuehler	c8099c0125	fix(vdisplay/mutter): stop screencast before monitor reconfig — fixes >60Hz teardown crash ... The high-refresh teardown SIGSEGV was caused by ApplyMonitorsConfig disabling the still-actively-captured high-refresh virtual output. Reorder teardown: Stop the screencast FIRST (Mutter removes the virtual + auto-reverts the temporary config), then re-assert the physical layout once the virtual is gone. Never reconfigure a live virtual CRTC. With this, PUNKTFUNK_MUTTER_VIRTUAL_REFRESH=1 is stable: validated at 5120x1440@240 on Mutter 50 + NVIDIA — virtual output Meta-0@240, real 240fps, gnome-shell survives back-to-back sessions + teardowns, physical (HDMI-1) restored each time. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-12 14:08:05 +00:00
enricobuehler	015f2ee47b	fix(vdisplay/mutter): gate >60Hz virtual mode behind an env flag (teardown SIGSEGV) ... Pinning the virtual output to a high client refresh via RecordVirtual "modes" works mid-stream, but a high-refresh virtual CRTC SIGSEGVs gnome-shell on session TEARDOWN (observed at 5120x1440@240) — taking down the whole GNOME session, so subsequent connects fail with RemoteDesktop ServiceUnknown. Gate it behind PUNKTFUNK_MUTTER_VIRTUAL_REFRESH, default OFF — Mutter then derives the virtual monitor's refresh from the PipeWire framerate (60Hz, stable). The >60Hz path stays in-tree for investigation; re-enable once the teardown crash is understood. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-12 13:59:29 +00:00
enricobuehler	f6a7f3c12d	feat(vdisplay/mutter): pin the virtual output to the client's refresh (>60 Hz) ... RecordVirtual without a "modes" property makes Mutter derive the virtual monitor's refresh from the PipeWire stream framerate and default to 60 Hz — so a 240 Hz client mode rendered at 60 (the encoder just padded to 240 with duplicate frames). Pass an explicit "modes" entry (size + refresh-rate + is-preferred) so Mutter creates the virtual monitor at the client's exact WxH@Hz. Mutter >= 47; older Mutter ignores the unknown key (60 Hz fallback, no regression). Confirmed first via raw D-Bus on the box, then validated end-to-end: the virtual output Meta-0 reports 1920x1080@240.00 and the host encodes 480 *immediate* (real, not paced) frames per 2 s. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-12 13:45:29 +00:00
enricobuehler	2ed755f0c3	fix(vdisplay/mutter): make the virtual output the SOLE display, not primary + secondary ... Keeping the physical monitor enabled as a secondary let the cursor, windows, and keyboard focus land on it — relative pointer motion wandered off the streamed surface, so on the client the cursor "disappeared" and clicks/keys went nowhere visible. Omit the physical outputs from ApplyMonitorsConfig so Mutter disables them for the session; everything is confined to the streamed virtual output. Restored on teardown. Validated on-box: mid-session DisplayConfig shows only the virtual output (Meta-0) as the sole primary; the physical (HDMI-1) is restored after the session ends. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-12 13:05:02 +00:00
enricobuehler	9fe7b7877f	feat(vdisplay/mutter): optional virtual-output-as-primary for monitored GNOME hosts ... PUNKTFUNK_MUTTER_VIRTUAL_PRIMARY=1: after RecordVirtual, promote the per-session virtual output to the primary monitor (physical kept on, secondary) via org.gnome.Mutter.DisplayConfig.ApplyMonitorsConfig, restoring on teardown. Without it, a GNOME host that also has a physical monitor attached keeps the physical primary, so the virtual output is an empty extended desktop — the client streams only the wallpaper. (The backend was validated on headless GNOME, where the virtual output is the only display.) Best-effort + opt-in: default behavior is unchanged; any DisplayConfig failure just logs and streaming continues. method=temporary, so nothing is written to monitors.xml and Mutter auto-reverts the layout when the virtual output is torn down. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-12 12:18:32 +00:00
enricobuehler	6fdf7d1511	feat: client-selectable compositor (protocol → host → client → C ABI → mgmt → web) ... A client can now request which compositor backend the host drives its virtual output on (gamescope/KWin/Mutter/wlroots). The host honors the request if that backend is available, else falls back to auto-detect and reports the resolved choice back — wire-compatible both directions (no ABI bump). Protocol (punktfunk-core): - New CompositorPref (config.rs): Auto|Kwin|Wlroots|Mutter|Gamescope with u8/name mappings. Appended as one optional byte to Hello (client preference) and Welcome (host's resolved choice). Both decoders already tolerate trailing bytes, so old↔new interop is preserved — ABI_VERSION stays 2. Round-trip + back-compat (truncated-message) tests. - C ABI: punktfunk_connect_ex(compositor) + PUNKTFUNK_COMPOSITOR_* constants; punktfunk_connect delegates with AUTO, so the existing symbol is unchanged. NativeClient::connect / worker_main thread the preference through. Host: - vdisplay::available() enumerates usable backends via cheap, side-effect-free probes (KWin zkde global, gamescope binary+version, GNOME/Sway env), plus Compositor id/label/as_pref/from_pref/all helpers. - m3 handshake resolves the preference to a concrete backend during the handshake (pick_compositor pure + resolved logging), reports it in Welcome, and threads it into virtual_stream (replacing the unconditional detect()). - mgmt GET /v1/compositors lists every backend with availability + the auto-detected default (OpenAPI regenerated). Client: - punktfunk-client-rs --compositor NAME; logs the host's resolved choice from the Welcome ("session offer … compositor=…"). Web console: - Host page gains a Compositors card (availability + default badges) via the codegen'd useListCompositors hook; en/de strings added. Also fixes a pre-existing, env-dependent test-isolation bug: mgmt::tests::paired_clients_list_and_unpair seeded the real ~/.config/punktfunk/paired.json (AppState::new loads it), so a real GameStream-paired client leaked into body[0] on a dev box — now cleared first. Live-validated against headless KWin: --compositor kwin honored, --compositor mutter falls back to kwin (available=[kwin, gamescope]), resolved choice round-trips to the client. Tests: +6 (wire/back-compat, resolution precedence, endpoint); workspace green, clippy/fmt clean, C ABI harness PASS at abi_version=2, web typecheck + build clean. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-10 22:45:41 +02:00
enricobuehler	bfd64ce871	rename: lumen → punktfunk, everywhere ... Full project rename, decided 2026-06-10: - Crates/binaries: punktfunk-core / punktfunk-host / punktfunk-client-rs. - C ABI: punktfunk_* symbols, Punktfunk* types, include/punktfunk_core.h, PUNKTFUNK_FEATURE_QUIC guard (header regenerated; cbindgen renames updated, incl. PUNKTFUNK_BTN_*/PUNKTFUNK_AXIS_* wire constants). - Protocol: punktfunk/1 — control-plane magic LMN1 → PKF1, nonce salt lmn1 → pkf1. WIRE BREAK: clients must be rebuilt from this revision. - Env knobs: PUNKTFUNK_VIDEO_SOURCE / PUNKTFUNK_COMPOSITOR / PUNKTFUNK_ZEROCOPY / …. - Host config dir: ~/.config/punktfunk (the box's dir was migrated in place — the persistent identity is unchanged, pinned fingerprints stay valid). - Swift package: PunktfunkKit + PunktfunkCore.xcframework + PunktfunkConnection (Sources/PunktfunkClient app + tests renamed with it); build-xcframework.sh updated. - scripts/: 60-punktfunk.rules, punktfunk-host.service; OpenAPI doc regenerated. Also: scripts/headless/run-headless-kde.sh — full headless Plasma bringup. Root cause of "desktop but no apps/settings" over the stream: plasmashell launched without XDG_MENU_PREFIX=plasma-, so the launcher resolved a nonexistent applications.menu and rendered an empty menu. The script sets the complete KDE session env (menu prefix, KDE_FULL_SESSION, session version) and rebuilds ksycoca before starting plasmashell. Gate: 97/97 tests, clippy -D warnings (both feature sets), fmt, C-ABI harness PASS, zero lumen references left outside .git. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-10 13:11:59 +00:00