21 Commits

Author	SHA1	Message	Date
enricobuehler	118752c136	fix(apple): drive DualSense rumble over raw HID (CoreHaptics is silent on macOS) ... GameController's CHHapticEngine never reaches the DualSense's motors on macOS — its adaptive triggers and lightbar work, but rumble stays silent (a documented platform gap). Drive the motors directly via the DualSense HID output report instead, the way SDL and the Linux hid-playstation driver do — the same report that already rumbles the pad on a Linux host. Confirmed live on macOS. - DualSenseHID (macOS): opens the Sony DualSense via IOHIDManager and writes the USB (0x02, 48 bytes) and Bluetooth (0x31, 78 bytes + CRC32) output reports through IOHIDDeviceSetReport. Allowed under the App Sandbox by the existing device.usb + device.bluetooth entitlements; coexists with GameController (non-seized open). Flags mirror the kernel driver (COMPATIBLE_VIBRATION | HAPTICS_SELECT + COMPATIBLE_VIBRATION2); valid_flag1 = 0 so a rumble report leaves the GameController-managed lightbar / triggers / player LEDs untouched. - RumbleRenderer routes a DualSense to the HID backend and keeps CoreHaptics for every other pad, fixing both live sessions and the test panel (shared renderer). - CoreHaptics path reworked too: bake the target intensity + an explicit sharpness into the continuous event (the dynamic-parameter scaling is silent on controller engines) and tear down outside the inout access to fix a latent exclusivity hazard. Adds a DEBUG-only Settings -> Controllers -> "Test Controller" panel (ControllerTestView + ControllerTester) that shows live input and fires rumble / adaptive triggers / lightbar / player LEDs straight at the pad, with a readout of the active rumble backend ("DualSense HID - USB/Bluetooth"). Used to validate the fix. Tests: DualSenseHIDTests pins the USB/BT report layout and the BT CRC32 (canonical 0xCBF43926 check vector). Debug + release build clean; gamepad suite green. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-22 13:16:41 +02:00
enricobuehler	3e6c9f6060	feat(gamepad): add virtual Xbox One/Series + DualShock 4 pad types ... Extends virtual-controller support beyond Xbox 360 + DualSense. Goal: a physical Xbox One or PS4 pad on the client gets a near-native matching virtual pad on the host, auto-resolved from the controller type. Protocol/core: - GamepadPref gains XboxOne (wire 3) + DualShock4 (wire 4); to_u8/from_u8/ from_name/as_str + C ABI PUNKTFUNK_GAMEPAD_XBOXONE/_DUALSHOCK4 constants (compile-time guard ties them to the enum). Single-byte wire form is unchanged, so it's forward-compatible (older peers degrade to Auto). Host (Linux): - New UHID DualShock 4 backend (inject/dualshock4.rs) bound by hid-playstation: lightbar, touchpad, motion, rumble — DualSense minus adaptive triggers / player LEDs / mute. Reuses the DualSense pure state + button mapping; only the report byte layout, the real-DS4 HID descriptor, the GET_REPORT handshake (0x12 MAC mandatory; 0x02 calibration; 0xa3 firmware) and the touchpad resolution (1920x942) differ. Touchpad/motion ride the existing 0xCC plane, lightbar the 0xCD Led plane (deduped); rumble the universal 0xCA plane. - Xbox One/Series is the uinput Xbox-360 backend parameterized with the One S USB identity (045e:02ea) for matching glyphs — XInput-identical otherwise. - PadBackend dispatch + resolver handle both; off Linux the UHID pads and One/Series fold into Xbox 360. Windows-host DS4 (ViGEm) deferred. Clients (auto-resolve physical pad -> virtual type, plus manual settings): - Linux/Windows (SDL3): SDL_GAMEPAD_TYPE_PS4 -> DualShock 4, _XBOXONE -> Xbox One; PadInfo carries the resolved pref; DS4 touchpad/motion capture + lightbar already type-agnostic. Linux settings combo + label updated. - Apple (GameController): GCDualShockGamepad/GCXboxGamepad detection, DS4 touchpad capture, settings picker entries. - Android (Kotlin): InputDevice VID/PID auto-detect (matching the other clients) + settings entries. - probe: --gamepad help/aliases. Also hardens the Android JNI boundary: wrap the teardown + poll-thread shims in catch_unwind so a panic degrades to a logged no-op instead of aborting the app. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-21 13:34:44 +00:00
enricobuehler	f5eae24c87	feat(apple): tabbed macOS Settings + stats-overlay placement/toggle + Stream menu ... The macOS Settings window had outgrown one scrolling pane — split it into a tabbed preferences window (General / Display / Audio / Controllers / Advanced). Each settings group is now a shared @ViewBuilder section, so iOS keeps its single grouped Form and tvOS its pushed-picker layout, each defined once. No setting moved or dropped. New statistics-overlay controls (Settings → Display → Statistics): a show/hide toggle (DefaultsKey.hudEnabled) and a corner picker (HUDPlacement / DefaultsKey.hudPlacement) — the HUD moves to the chosen corner and aligns its text to that edge. A Scene-level "Stream" menu (StreamCommands) carries Show/Hide Statistics (⌘⇧S) and Disconnect (⌘D). Disconnect moved off the HUD button into the menu so it survives the overlay being hidden, wired via .focusedSceneValue. On iOS a material-backed exit chip appears when the HUD is hidden (touch users have no menu/⌘D); tvOS disconnect is unchanged (Siri-Remote Menu button). Builds on macOS/iOS/tvOS; swift test green. Adversarially reviewed (8 findings refuted, 2 minor — the iOS exit-chip contrast fix is included here). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-15 22:11:39 +02:00
enricobuehler	8c2e245c8b	fix(apple/cursor): disable the client-side cursor (gamescope traps input) ... The client-side cursor positions the host pointer with ABSOLUTE events, but gamescope's input socket (EIS) grants only a relative pointer — the host drops the absolute events (libei.rs: no PointerAbsolute → not emitted), so the pointer never moves and clicks/scroll land on the stuck position. Auto-mode enabled exactly this on gamescope, making all input appear dead until toggled off. Force `cursorVisible = false`, neuter the ⌘⇧C toggle, and hide the now-inert Settings picker. The resolution logic + handlers are kept (commented) for when per-compositor gating (KWin/GNOME/Sway have an absolute pointer) or a synthetic-cursor-over-relative path lands. Relative capture (the working path) is now always used. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 17:14:57 +00:00
enricobuehler	36a04e667c	fix(apple): capture the PS/Home button + fullscreen only while streaming ... Two issues from live Mac testing, plus a requested fullscreen option: - PS button: the Home/PS button (→ guide; the host maps it to the DualSense PS bit) does not reliably fire GCExtendedGamepad.valueChangedHandler on macOS, so its presses were dropped. Add a dedicated buttonHome.pressedChangedHandler that re-syncs. The host already maps BTN_GUIDE→PS, so this is the missing client half. - Fullscreen: a macOS FullscreenController (NSViewRepresentable) takes the window fullscreen while a session is up (incl. the trust prompt over the blurred stream) and restores it on the host list — so only the stream is fullscreen, not the picker. New `fullscreenWhileStreaming` setting (default on) + a Settings "Window" toggle. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 16:14:37 +00:00
enricobuehler	5706e7ebf4	feat(apple/library): launch a picked title (step 4 client side) ... Tapping a game in the (flagged) library now starts a session that asks the host to launch it — the picked GameEntry id rides the connect down to the host, which resolves it against its own library (27e5865). - PunktfunkConnection.init gains `launchID` and calls the new punktfunk_connect_ex4 (wrapping it in withOptionalCString; nil = host default). - Threaded SessionModel.connect(launchID:) → ContentView.connect(_:launchID:) → a `launchTitle(host, id)` helper that dismisses the browser and connects. - LibraryView gains `onLaunch`; cards become buttons that fire it. Wired on every platform (ContentView sheet on macOS/iOS, HomeView destination on tvOS) via a new `onLaunchTitle` closure on HomeView. Settings footer updated (launch is live now). Can't compile Swift on the Linux box; CI (apple.yml) verifies. The host side of this chain is live-validated on the dev box: a client `--launch custom:<id>` made the host resolve the id and spawn gamescope running the title (see 27e5865). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 15:00:58 +00:00
enricobuehler	1b610d6bf5	feat(apple/library): experimental game-library browser (flagged off) ... Plan step 3 — the Apple client surfaces the host's game library, behind a feature flag (`DefaultsKey.libraryEnabled`, default OFF). Browsing only; launching a chosen title is step 4. - PunktfunkKit `LibraryClient`: Codable GameEntry/Artwork/LaunchSpec mirroring crates/punktfunk-host/src/library.rs, and an async fetch of GET /api/v1/library with a bearer token. Typed LibraryError guides setup (the common case is "needs a --mgmt-token"). `Artwork.posterCandidates` = portrait → header → hero. - `LibraryView`: cross-platform poster grid (LazyVGrid, AsyncImage that walks the art candidates past load failures to a text placeholder), a store badge, and an inline Connection form (mgmt port + token) that surfaces when the API is unreachable / 401 / no token set. Read-only. - StoredHost gains `mgmtPort`/`mgmtToken` (the mgmt API is a distinct port from the data plane and needs a token off-loopback). Both OPTIONAL — synthesized Decodable ignores property defaults but treats a missing Optional as nil, so older saved hosts decode unchanged (a defaulted non-optional would wipe the list). HostStore.setMgmt. - Entry point: a flag-gated "Browse Library…" host-card context action → LibraryView (sheet on macOS/iOS, pushed on tvOS), mirroring the pair/speed-test plumbing. Plus a Settings "Experimental" toggle. Can't compile Swift on the Linux dev box; CI (apple.yml: swift build + swift test on the mac mini) verifies the macOS path. Added LibraryClientTests (decode + art order) for `swift test`. iOS/tvOS-only branches mirror existing patterns. Live-verify on the Mac pending. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 14:28:16 +00:00
enricobuehler	c64816c70a	feat(apple): client-side cursor for gamescope sessions (toggle + shortcut) ... gamescope's PipeWire capture carries no cursor (verified upstream — it never composites the cursor or adds SPA_META_Cursor), so the cursor must be drawn on the client. New macOS "cursor-visible" capture mode: instead of disassociating+hiding the system cursor and sending relative deltas (the game path, unchanged), it keeps the system cursor visible over the stream and sends ABSOLUTE positions (MouseMoveAbs), mapped through the video's aspect-fit (AVMakeRect) to host pixels with the letterbox bars dropped. The visible system cursor IS the client cursor — zero added latency, no double cursor (gamescope draws none), accurate (the client drives the host's absolute mouse). - Default: on iff the session's resolved compositor is gamescope (via the new punktfunk_connection_compositor getter, fc30307). - Settings: "Cursor in stream" → Auto (gamescope) / Always / Never. - Shortcut: ⌘⇧C toggles it live mid-session (re-engages capture so disassociation + abs/rel forwarding swap atomically); shown in the HUD. macOS-only (the visible-cursor mode lives in the macOS StreamView). Verified to compile + link via xcodebuild Release on the Mac; runtime behavior (cursor landing, hover forwarding) to be confirmed live. Rust ABI side committed separately. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-14 12:07:15 +00:00
enricobuehler	9e8135ccec	refactor(apple): code-quality pass — audit fixes + centralized defaults keys ... A 6-agent adversarial audit of the client (11 confirmed of 39 findings, the rest filtered) drove these: - fix: SessionAudio ring buffer — guard a write larger than the ring (would push readIdx past writeIdx and corrupt the buffer; never happens, but guard not corrupt). - fix: CADisplayLink retain cycle (stage-2 presenter) — a weak-target DisplayLinkProxy so the view can deallocate (the link retains its target); stage-2 teardown added to both StreamView/StreamViewController deinits as a safety net. - fix: GamepadFeedback deinit { flag.stop() } — the drain thread holds the connection strongly and self weakly, so an abrupt teardown without stop() would leak it. - refactor: centralize the 12 UserDefaults/@AppStorage key literals (scattered across 8 files) into one DefaultsKey enum — a typo silently splits a setting's reader from its writer. - docs: RumbleRenderer @unchecked Sendable invariant; the HID digit-row table; the stage-2 layer compositing. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-12 16:30:34 +02:00
enricobuehler	7b10714b62	feat(apple): stage-2 presenter — explicit decode + Metal present + glass-to-glass ... Opt-in (Settings -> Presenter; `punktfunk.presenter`, default stage-1). Stage-1's AVSampleBufferDisplayLayer decodes AND presents internally with no per-frame callback, so neither decode nor present can be stamped or hand-paced. Stage-2 takes explicit control: - VideoDecoder: VTDecompressionSession, async output callback stamps decode-completion, session rebuilt on every IDR / format change. Unit-tested (testVideoDecoderAsyncCallbackDeliversPixels). - MetalVideoPresenter: CAMetalLayer + CVMetalTextureCache + a runtime-compiled BT.709 limited-range NV12->RGB shader, present at the next vsync. The CVMetalTextures + pixel buffer are held until the GPU completes. - Stage2Pipeline: pump thread -> decoder -> newest-ready 1-slot ring; the hosting view's display link drains it once per vsync and stamps capture->present (the display-link target time projected into CLOCK_REALTIME). - LatencyMeter gains record(ptsNs:atNs:offsetNs:); the HUD shows a capture->present (glass-to-glass, modulo host render->capture) line, skew-corrected via clockOffsetNs. Measured live ~11 ms p50 vs ~2.2 ms capture->client. - StreamView / StreamViewIOS host the CAMetalLayer as a sublayer + a CADisplayLink (NSView.displayLink on macOS) when stage-2; input capture + HUD unchanged. The session-active gates switch from `pump != nil` to `connection != nil` so capture engages without a StreamPump. Validated: builds macOS/iOS/tvOS; the decode half is unit-tested; the Metal present is live-validated on glass (correct image + the capture->present number). Colorspace is BT.709 SDR for now; 10-bit/HDR + a pacing policy are later. Plan: docs-site/content/docs/apple-stage2-presenter.md. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-12 15:29:23 +02:00
enricobuehler	6b4de5d738	feat(client/speedtest): request the host's full 3 Gbps probe ceiling ... The Apple speed test asked for only 400 Mbps, capping the measured throughput there and hiding the link's real headroom. Request the host's full MAX_PROBE_KBPS (3 Gbps) instead, and raise the recommended-bitrate clamp from 500 Mbps to the host's 2 Gbps session ceiling so a fast measurement yields a usable recommendation. Also fix the stale caps left when the host clamps were raised (b8a33e2): the resolved-bitrate range and the probe doc comments (abi.rs, client.rs, regenerated header), plus the section 9 roadmap copy, now read 3 Gbps probe / 2 Gbps session. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-12 14:08:19 +02:00
enricobuehler	1d605fb781	feat(gamepad): controller discovery + client-negotiated pad type + rich DualSense end to end ... The Apple client grows full gamepad support and punktfunk/1 learns to negotiate the virtual pad type: - Protocol: Hello carries a GamepadPref byte (offset 21, the same trailing-byte back-compat pattern as the compositor; echoed resolved in Welcome at 54). Host precedence: explicit client choice > PUNKTFUNK_GAMEPAD env > Xbox 360, DualSense (UHID) only where available. ABI: punktfunk_connect_ex2 + punktfunk_connection_gamepad (connect_ex delegates; ABI_VERSION stays 2 — the trailing byte IS the compat mechanism). punktfunk-client-rs gets --gamepad. - Swift client: GamepadManager (app-lifetime discovery + selection — Settings lists every controller with capabilities/battery/"In use"; exactly ONE pad forwards as pad 0, auto = most recently connected, or pinned), GamepadCapture (snapshot-diff button/axis events, DualSense touchpad + ~250 Hz motion on the rich-input plane, held state released on switch/deactivate/stop), GamepadFeedback (rumble → CoreHaptics per-handle engines; lightbar → GCDeviceLight; player LEDs → playerIndex; adaptive-trigger blocks → the table-driven DualSenseTriggerEffect parser → GCDualSenseAdaptiveTrigger, exact for the 10-zone positional modes). The pad type auto-resolves from the physical controller at connect time, user-overridable in Settings. - Host DualSense fixes surfaced by adversarial review against hid-playstation / SDL / Nielk1 ground truth: input-report sensor/touch offsets were off by one (the kernel read garbage motion + phantom touches), the L2/R2 trigger blocks were swapped (the report is right-trigger-first), feedback now gates on the report's valid-flags (a plain rumble write no longer blanks lightbar/ triggers), and the touchpad rescale clamps to the advertised ABS_MT extents. - Tests: Hello/Welcome trailing-byte back-compat, pick_gamepad precedence, byte-exact input-report layout, valid-flag gating, per-mode trigger-parser table (incl. packed 3-bit zones), wire conversions, and a scripted loopback feedback burst (PUNKTFUNK_TEST_FEEDBACK=1) asserted through the xcframework on the rumble + HID-output planes. Validated: cargo test/clippy/fmt green on macOS + Linux (61 host tests), swift build/test green, test-loopback.sh green, tvOS/iOS targets compile. DualSense motion sign/scale is derived from the calibration blob, not yet live-verified (constants isolated in GamepadWire). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-06-11 16:28:33 +02:00
enricobuehler	7655c36f34	fix(apple/tvOS): hand-rolled selection screens — kills the black-text flash in pickers ... The navigationLink Picker's INTERNAL destination list renders its rows in the focused (dark-text) style while the push animates — black text over the dark backdrop until focus settles (present under the old fade too; a SwiftUI-on-tvOS quirk we don't control). Settings now uses its own primitives instead: - TVSelectionRow: label + current value, pushes… - TVSelectionList: a Settings-app-style option list (plain button rows + checkmark, selecting pops back) — ordinary button chrome, no focused-style pre-rendering. The stream-mode and compositor pickers are gone on tvOS; the Settings screen itself is a plain scroll of rows + footer (no Form), matching the rest of the tv UI. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-06-11 14:19:54 +02:00
enricobuehler	f01b07a973	fix(apple/tvOS): pushed routes instead of modal covers — the Settings-app navigation feel ... Add Host, Settings and PIN pairing were fullScreenCover overlays, which is why navigating felt unlike the system Settings app (no push animation, no Menu-pops-a-level semantics). They are now navigationDestination ROUTES pushed inside the home NavigationStack: - the system push/pop animation and Menu-button back navigation come for free; - the Settings pickers' navigationLink pushes reuse the same stack (its inner NavigationStack wrapper is gone, as is the tvOS Done row — Menu pops, like Settings); - Add Host is a real full-screen page (system navigation title, Settings-style rows on the standard backdrop) instead of a floating dialog, same for the pairing page; - the thickMaterial cover backdrops became unnecessary and are gone. The system keyboard entries stay as covers — that presentation is system-owned either way. iOS/macOS keep their sheets. Verified by screenshot: Add Host renders as a pushed full-screen route with the title top-center. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-06-11 14:03:10 +02:00
enricobuehler	9e57a5a1ff	fix(apple/tvOS): native form controls — pushed pickers, single-pill fields, centered values ... The inline iOS form widgets fought the tvOS focus system at every turn: focused fields showed nested pills, rows darkened oddly and grew on activation, the Compositor picker was not even focusable, and prefilled fields (port, client name) floated their label inside the pill, shoving the value off-center. - Settings is now a fully tv-native screen: NO inline text entry — the stream mode is a preset picker (This TV native / 720p / 1080p / 4K, plus a Custom entry preserving a mode set on another platform) and both pickers use .navigationLink style (pushed selection lists, exactly like the system Settings app — and properly focusable; the cover wraps in a NavigationStack for the pushes). - Where text entry is unavoidable (Add Host, PIN pairing), the fields keep their stock single-pill chrome (the grouped form style stays off tvOS — its row platters were one of the nested pills) and prefilled fields hide their floating label so values center vertically. - All earlier row-clearing experiments reverted. Verified by screenshot in the Apple TV simulator: Settings rows render as single focus lozenges with chevrons; the Add Host pills are uniform with centered text. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-06-11 13:38:37 +02:00
enricobuehler	7dd479f9e4	fix(apple/tvOS): television-idiomatic chrome — grid action tiles + full-screen covers ... The iOS chrome half-worked on tvOS: toolbar items rendered tiny with clipped labels and could not even be focused (which is why "+" never opened the add-host form), and sheet presentations are not a tvOS idiom (the Settings form looked broken). - The toolbar is gone on tvOS. Add Host and Settings live IN the hosts grid as full-size, focus-native tiles (.card style, same geometry as the host cards) — the natural way actions work on television. - Every modal (Add Host, Settings, PIN pairing) presents as a fullScreenCover on tvOS; Settings gains a tvOS-only Done button (covers don't dismiss themselves). - iOS/macOS keep their existing toolbar + sheets untouched. Verified in the Apple TV simulator: title, host card and both action tiles render full-size and focusable. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-06-11 13:22:18 +02:00
enricobuehler	bfd8c7be93	feat(apple): tvOS client — third app target, first-lit in the Apple TV simulator ... The same app now runs on tvOS (target Punktfunk-tvOS, bundle io.unom.punktfunk.tvos), validated live against the box: vkcube at 1280x720@60, 60 fps in the Apple TV 4K simulator, glass HUD with a focusable Disconnect button. - PunktfunkCore.xcframework grows tvOS device + universal-simulator slices. These are TIER-3 Rust targets (no prebuilt std): BUILD_TVOS=1 builds them with nightly and -Zbuild-std from rust-src — the full quic stack (quinn/rustls-ring/tokio) compiles for tvOS unchanged. - The UIKit stream view covers iOS AND tvOS, with pointer interaction, pointer lock, touch forwarding and InputCapture gated to iOS — tvOS is view-only until gamepad capture lands (the natural tvOS input). - SessionAudio on tvOS: .playback session, no mic (no app-accessible microphone). - App chrome gates: keyboardShortcut/textSelection/controlSize/statusBarHidden are iOS/macOS-only; host cards use the focus-native .card button style on tvOS; the Audio settings section hides (system-routed); mode seeding works from the TV screen (1920x1080@60). - Package platforms += .tvOS(.v17); new Xcode target + shared scheme (TARGETED_DEVICE_FAMILY 3, local-network usage description included). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-06-11 13:10:40 +02:00
enricobuehler	e1af4d57c6	feat(apple): iOS/iPadOS client — touch, pointer lock, shared SwiftUI shell ... The whole client now runs on iPadOS/iOS from the same sources, first-lit live in the iPad simulator against the real host at 1280x720@60 (60 fps on the HUD, capture state machine active, mic permission flow shown). - PunktfunkCore.xcframework grows iOS device + universal-simulator slices (BUILD_IOS=1; rustup targets aarch64-apple-ios{,-sim} + x86_64-apple-ios). - The decode pump is extracted into a shared StreamPump (identical IDR re-gate logic on both platforms); the iOS StreamView (StreamViewIOS.swift) has the same name/signature as the macOS one, so ContentView & co. are byte-identical across platforms — hosted in a UIViewController for prefersPointerLocked (the iPadOS cursor capture; see README note 9 for the UIHostingController forwarding caveat). - Touch is always forwarded: per-finger wire ids, coordinates mapped through the aspect-fit letterbox into LIVE host-mode pixels (surface == host mode, identity rescale host-side; follows mid-stream requestMode switches). - InputCapture is cross-platform: GC works the same on iPadOS, ⌘⎋ is detected from the HID stream there; stale-⌘ tracking after focus loss fixed on both platforms (releaseAll now drops the modifier/latch state — a ⌘ released in another app otherwise hijacked Esc forever). - SessionAudio: AVAudioSession on iOS (.playAndRecord + .defaultToSpeaker — without it iPhones route host audio to the EARPIECE; deactivated with notifyOthersOnDeactivation on stop so interrupted background audio resumes); HAL device pinning + the Settings pickers stay macOS-only. - New Punktfunk-iOS app target (shared synchronized sources, generated Info.plist with mic + local-network usage descriptions — QUIC to a LAN host trips local network privacy on real devices — scene manifest + indirect input events for Stage Manager / external displays), shared scheme, macOS min-window frames gated off iOS. For the iPad-on-an-external-screen idea: with multiple scenes + indirect input enabled, Stage Manager iPads can drag the punktfunk window onto the external display and drive the PC with keyboard/mouse/touch. Known gaps (README note 9): the pointer-lock preference isn't consulted through UIHostingController (relative mouse works, the local cursor just stays visible) and AVAudioSession interruptions don't auto-restart audio. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-06-11 11:18:25 +02:00
enricobuehler	b26f138699	feat(apple): session audio — host playback + mic uplink, device pickers in Settings ... Both directions of the audio plane, on CoreAudio's built-in Opus codec (kAudioFormatOpus — no bundled libopus; OpusCodec.swift, round trip unit-tested): - Playback: a drain thread pulls nextAudio() packets, decodes, and writes a priming jitter ring feeding an AVAudioSourceNode (~20 ms prefill, adaptive to the device's render quantum so large-buffer devices don't oscillate prime/dropout; a high-water clamp sheds stall backlog so one network hiccup can't permanently lag audio behind video; underrun re-primes — one dip, not sustained crackle). - Mic: a second engine taps the input device, resamples to 48 kHz stereo, Opus-encodes 20 ms chunks and sendMic()s them into the host's virtual PipeWire source. Permission via AVCaptureDevice (NSMicrophoneUsageDescription added to the Xcode target). - Settings: Speaker + Microphone pickers (CoreAudio HAL enumeration, persisted by device UID — "System default" leaves the engine unpinned so it follows macOS device changes) and a "Send microphone" toggle (default on). Applies from the next session. - Audio starts with streaming, never during the trust prompt (no host sound — and no mic uplink — before the user trusted the host); teardown stops audio before close(). Adversarial-review fixes baked in: stop() and the dangling mic-permission callback share one lock+flag protocol (no hot mic with no owner), the connect-success handler bails when the attempt was abandoned mid-handshake (no session/mic for a dead window), SessionAudio gets a deinit backstop (a dropped instance can't pin the connection via its drain thread), and the render scratch buffer is block-owned (was leaked per session). Verified live against the box: remote test decodes 100 host Opus packets to PCM and the host opens its virtual mic on the first uplinked frame ("punktfunk/1 virtual mic ready"); on-glass session runs with both engines up. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-06-11 09:39:15 +02:00
enricobuehler	a9d1c16067	feat(apple): client-selectable compositor in the macOS client ... Adopts punktfunk_connect_ex from the compositor-selection batch: a Compositor enum on PunktfunkConnection (auto/kwin/wlroots/mutter/gamescope, with the host's name aliases for env parsing), a "Host compositor" picker in Settings (default Automatic — a concrete choice is honored only if that backend is available host-side), and PUNKTFUNK_COMPOSITOR / PUNKTFUNK_REMOTE_COMPOSITOR pass-throughs for the autoconnect dev hook and the remote first-light test. The wire change is backward-compatible (optional trailing byte), so no behavior changes at the default. Validated live against the box: host with no compositor env (auto-detect = KWin) logged "honoring client compositor request compositor=gamescope" and streamed 60/60 decoded frames from the spawned gamescope. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-06-10 22:51:42 +02:00
enricobuehler	5e77731da0	feat: hosts grid + trust-on-first-use UX + settings pane ... The app grows from a dev connect form into a real client shell: - Home is a grid of saved hosts (UserDefaults-persisted; context menu: Remove / Forget Identity), "+" in the toolbar opens the add-host sheet, the stream mode moved into Settings (⌘, / gear) — native resolution stays the only mode, no scaling. - Trust is now explicit: the protocol always supported certificate pinning, but the app passed no pin and discarded the observed fingerprint — silently trusting any host. First connect now shows the host's SHA-256 fingerprint (compare with the "clients pin this fingerprint" line in the host log) over the live-but-blurred stream; the stream must pump immediately (the opening IDR is the only guaranteed one), so StreamView gains a capturesCursor switch to keep the cursor free while the prompt needs clicking, and input capture starts only after confirmation. Trusting pins the fingerprint per host; a changed host identity then refuses to connect. - PUNKTFUNK_AUTOCONNECT keeps working (auto-trusts, doesn't touch the saved hosts). Host→client authorization (pairing PIN) remains a punktfunk-core roadmap item — the host still accepts any client that can reach its port. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-06-10 16:15:37 +02:00