feat(inject/windows): pen P3 — PT_PEN + PT_TOUCH synthetic pointer injection

The Windows leg of design/pen-tablet-input.md §6, following Apollo's recipe:
a per-session PT_PEN device (pressure rescaled 0..1024, polar tilt→tiltX/Y,
barrel roll on rotation — Windows Ink renders Pencil Pro roll natively, barrel
button, eraser via INVERTED/ERASER flags, hover) with a 40ms refresh thread
against the ~100ms synthetic-pointer staleness auto-lift, plus a PT_TOUCH
device closing the historical SendInput wire-touch no-op (full active-contact
frames, per-id DOWN/UP edges, self-healing lost-DOWN synthesis). pen_supported
now probes PT_PEN creation on Windows (1809+), which lights up HOST_CAP_PEN
and the GameStream featureFlags there — Moonlight iPad + Pencil can ink on a
Windows host. Frame grouping mirrors the Linux uinput backend.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

crates/pf-inject/Cargo.toml

@@ -61,5 +61,10 @@ windows = { version = "0.62", features = [
     "Win32_System_StationsAndDesktops",
     "Win32_System_Threading",
     "Win32_UI_Input_KeyboardAndMouse",
+    # Synthetic pointer devices (PT_PEN / PT_TOUCH) — the pen/touch injectors. The device
+    # create/destroy + POINTER_TYPE_INFO live under Controls in this metadata layout;
+    # InjectSyntheticPointerInput + POINTER_*_INFO under Input_Pointer.
+    "Win32_UI_Controls",
+    "Win32_UI_Input_Pointer",
     "Win32_UI_WindowsAndMessaging",
 ] }

crates/pf-inject/src/inject/windows/pointer_windows.rs

@@ -0,0 +1,509 @@
+//! Windows synthetic-pointer injection (design/pen-tablet-input.md §6): a per-session `PT_PEN`
+//! device carrying the pen plane's full fidelity — pressure (rescaled to Windows' 0..1024),
+//! polar tilt → tiltX/tiltY, barrel roll on `rotation` (0..359 — Windows Ink renders Pencil
+//! Pro roll natively), barrel button, eraser (`PEN_FLAG_INVERTED`/`ERASER`), hover — plus a
+//! `PT_TOUCH` device that closes the long-standing SendInput touch no-op for wire touches.
+//!
+//! Both follow Apollo's proven recipe (`design/apollo-comparison.md`): synthetic pointer state
+//! goes STALE if not re-injected (~100 ms), so each device runs a small refresh thread that
+//! re-asserts the last frame every [`REFRESH_MS`] while the pen is in range / contacts are
+//! held — a stationary stylus must not hover-out (and a held finger must not auto-lift) just
+//! because no new samples arrived. `CreateSyntheticPointerDevice` needs Win10 1809+;
+//! [`crate::pen_supported`] probes it, so older hosts simply never advertise pen.
+//!
+//! Frame grouping mirrors the Linux uinput backend: a proximity-enter is injected together
+//! with its position (never at a stale point), tip edges get their own DOWN/UP frames, and a
+//! range-leave is a final frame without `INRANGE`.
+
+// Every `unsafe` block in this file carries a `// SAFETY:` proof; enforce it.
+#![deny(clippy::undocumented_unsafe_blocks)]
+
+use anyhow::{Context, Result};
+use punktfunk_core::input::{InputEvent, InputKind};
+use punktfunk_core::quic::{
+    PenSample, PenTool, PenTransition, PEN_ANGLE_UNKNOWN, PEN_BARREL1, PEN_TILT_UNKNOWN,
+};
+use std::sync::atomic::{AtomicBool, Ordering};
+use std::sync::{Arc, Mutex};
+use windows::Win32::Foundation::POINT;
+use windows::Win32::UI::Controls::{
+    CreateSyntheticPointerDevice, DestroySyntheticPointerDevice, HSYNTHETICPOINTERDEVICE,
+    POINTER_FEEDBACK_DEFAULT, POINTER_TYPE_INFO, POINTER_TYPE_INFO_0,
+};
+use windows::Win32::UI::Input::Pointer::{
+    InjectSyntheticPointerInput, POINTER_FLAGS, POINTER_FLAG_DOWN, POINTER_FLAG_FIRSTBUTTON,
+    POINTER_FLAG_INCONTACT, POINTER_FLAG_INRANGE, POINTER_FLAG_NEW, POINTER_FLAG_UP,
+    POINTER_FLAG_UPDATE, POINTER_INFO, POINTER_PEN_INFO, POINTER_TOUCH_INFO,
+};
+use windows::Win32::UI::WindowsAndMessaging::{
+    GetSystemMetrics, PEN_FLAG_BARREL, PEN_FLAG_ERASER, PEN_FLAG_INVERTED, PEN_FLAG_NONE,
+    PEN_MASK_PRESSURE, PEN_MASK_ROTATION, PEN_MASK_TILT_X, PEN_MASK_TILT_Y, PT_PEN, PT_TOUCH,
+    SM_CXVIRTUALSCREEN, SM_CYVIRTUALSCREEN, SM_XVIRTUALSCREEN, SM_YVIRTUALSCREEN, TOUCH_FLAG_NONE,
+    TOUCH_MASK_NONE,
+};
+
+/// Re-inject cadence while state is held (in-range pen / touching contacts). Apollo uses
+/// 50 ms against the ~100 ms staleness window; 40 ms keeps two refreshes inside it.
+const REFRESH_MS: u64 = 40;
+
+/// Windows pen pressure is 0..1024 (vs the wire's full-scale u16).
+const WIN_PEN_PRESSURE_MAX: u32 = 1024;
+
+/// Map a normalized [0,1] coordinate pair onto virtual-desktop pixels — the same surface the
+/// SendInput absolute mouse targets, so pen, touch, and pointer all land identically.
+fn to_screen(x: f32, y: f32) -> POINT {
+    // SAFETY: `GetSystemMetrics` takes a constant index and reads global metrics; no memory in.
+    let (vx, vy, vw, vh) = unsafe {
+        (
+            GetSystemMetrics(SM_XVIRTUALSCREEN),
+            GetSystemMetrics(SM_YVIRTUALSCREEN),
+            GetSystemMetrics(SM_CXVIRTUALSCREEN).max(1),
+            GetSystemMetrics(SM_CYVIRTUALSCREEN).max(1),
+        )
+    };
+    POINT {
+        x: vx + (x.clamp(0.0, 1.0) * (vw - 1) as f32) as i32,
+        y: vy + (y.clamp(0.0, 1.0) * (vh - 1) as f32) as i32,
+    }
+}
+
+/// An owned `HSYNTHETICPOINTERDEVICE` (destroyed exactly once on drop).
+struct Device(HSYNTHETICPOINTERDEVICE);
+
+// SAFETY: the handle is a plain kernel object identifier with no thread affinity —
+// `InjectSyntheticPointerInput`/`DestroySyntheticPointerDevice` are documented callable from
+// any thread; ownership transfer/sharing does not alias memory.
+unsafe impl Send for Device {}
+
+impl Drop for Device {
+    fn drop(&mut self) {
+        // SAFETY: `self.0` is the device this wrapper uniquely owns; destroyed once here.
+        unsafe { DestroySyntheticPointerDevice(self.0) };
+    }
+}
+
+/// Probe: can this Windows build create a synthetic pen device (Win10 1809+)?
+pub fn synthetic_pen_available() -> bool {
+    // SAFETY: FFI create with by-value args; on success the returned handle is destroyed
+    // immediately by the `Device` wrapper, exactly once.
+    match unsafe { CreateSyntheticPointerDevice(PT_PEN, 1, POINTER_FEEDBACK_DEFAULT) } {
+        Ok(h) => {
+            drop(Device(h));
+            true
+        }
+        Err(_) => false,
+    }
+}
+
+/// The tracked pen state a refresh tick re-asserts.
+#[derive(Default)]
+struct PenState {
+    in_range: bool,
+    touching: bool,
+    barrel: bool,
+    eraser: bool,
+    x: f32,
+    y: f32,
+    pressure: u16,
+    tilt_deg: u8,
+    azimuth_deg: u16,
+    roll_deg: u16,
+}
+
+struct PenShared {
+    dev: Device,
+    state: PenState,
+}
+
+/// One per-session virtual pen (the Windows sibling of the Linux uinput tablet — same
+/// [`PenTransition`] consumer API). Wire barrel button 2 has no Windows pen equivalent
+/// (one barrel + eraser is the platform model) and is ignored here.
+pub struct VirtualPen {
+    shared: Arc<Mutex<PenShared>>,
+    stop: Arc<AtomicBool>,
+    refresher: Option<std::thread::JoinHandle<()>>,
+    // Batch-local frame grouping (single-threaded within apply_batch).
+    edge_down: bool,
+    edge_up: bool,
+    is_new: bool,
+    frame_dirty: bool,
+    frame_has_motion: bool,
+}
+
+impl VirtualPen {
+    pub fn create() -> Result<VirtualPen> {
+        // SAFETY: FFI create with by-value args; the handle's sole owner becomes `Device`.
+        let dev = unsafe { CreateSyntheticPointerDevice(PT_PEN, 1, POINTER_FEEDBACK_DEFAULT) }
+            .context("CreateSyntheticPointerDevice(PT_PEN) — needs Windows 10 1809+")?;
+        let shared = Arc::new(Mutex::new(PenShared {
+            dev: Device(dev),
+            state: PenState::default(),
+        }));
+        let stop = Arc::new(AtomicBool::new(false));
+        // The staleness guard: re-assert the last frame while in range so a stationary pen
+        // (native plane: between 100 ms heartbeats; GameStream: indefinitely) never hovers out.
+        let refresher = {
+            let shared = Arc::clone(&shared);
+            let stop = Arc::clone(&stop);
+            std::thread::Builder::new()
+                .name("pf-pen-refresh".into())
+                .spawn(move || {
+                    while !stop.load(Ordering::Relaxed) {
+                        std::thread::sleep(std::time::Duration::from_millis(REFRESH_MS));
+                        let s = shared.lock().unwrap();
+                        if s.state.in_range {
+                            inject_pen(&s.dev, &s.state, POINTER_FLAG_UPDATE, false);
+                        }
+                    }
+                })
+                .context("spawn pen refresh thread")?
+        };
+        tracing::info!("virtual pen created (Windows synthetic pointer, PT_PEN)");
+        Ok(VirtualPen {
+            shared,
+            stop,
+            refresher: Some(refresher),
+            edge_down: false,
+            edge_up: false,
+            is_new: false,
+            frame_dirty: false,
+            frame_has_motion: false,
+        })
+    }
+
+    /// Apply one batch of tracker transitions — same grouping contract as the Linux backend:
+    /// `[ProxIn, Motion, TipDown]` is ONE frame (entry lands at its position, in contact),
+    /// consecutive `Motion`s split, tip edges own their frames, range-leave is a final
+    /// no-`INRANGE` frame.
+    pub fn apply_batch(&mut self, transitions: &[PenTransition]) {
+        for t in transitions {
+            match t {
+                PenTransition::ProximityIn { tool } => {
+                    self.flush();
+                    let mut s = self.shared.lock().unwrap();
+                    s.state.in_range = true;
+                    s.state.eraser = *tool == PenTool::Eraser;
+                    drop(s);
+                    self.is_new = true;
+                    self.frame_dirty = true;
+                }
+                PenTransition::Motion { sample } => {
+                    if self.frame_has_motion {
+                        self.flush();
+                    }
+                    self.set_axes(sample);
+                    self.frame_dirty = true;
+                    self.frame_has_motion = true;
+                }
+                PenTransition::TipDown => {
+                    self.shared.lock().unwrap().state.touching = true;
+                    self.edge_down = true;
+                    self.frame_dirty = true;
+                }
+                PenTransition::ButtonsChanged { pressed, released } => {
+                    let mut s = self.shared.lock().unwrap();
+                    if pressed & PEN_BARREL1 != 0 {
+                        s.state.barrel = true;
+                    }
+                    if released & PEN_BARREL1 != 0 {
+                        s.state.barrel = false;
+                    }
+                    drop(s);
+                    self.frame_dirty = true;
+                }
+                PenTransition::TipUp => {
+                    self.shared.lock().unwrap().state.touching = false;
+                    self.edge_up = true;
+                    self.frame_dirty = true;
+                    self.flush(); // UP owns its frame (still INRANGE)
+                }
+                PenTransition::ProximityOut => {
+                    self.shared.lock().unwrap().state.in_range = false;
+                    self.frame_dirty = true;
+                    self.flush(); // final frame without INRANGE
+                }
+            }
+        }
+        self.flush();
+    }
+
+    fn set_axes(&mut self, s: &PenSample) {
+        let mut sh = self.shared.lock().unwrap();
+        sh.state.x = s.x;
+        sh.state.y = s.y;
+        sh.state.pressure = s.pressure;
+        sh.state.tilt_deg = s.tilt_deg;
+        sh.state.azimuth_deg = s.azimuth_deg;
+        sh.state.roll_deg = s.roll_deg;
+    }
+
+    fn flush(&mut self) {
+        if !self.frame_dirty {
+            return;
+        }
+        let edge = if self.edge_down {
+            POINTER_FLAG_DOWN
+        } else if self.edge_up {
+            POINTER_FLAG_UP
+        } else {
+            POINTER_FLAG_UPDATE
+        };
+        let s = self.shared.lock().unwrap();
+        inject_pen(&s.dev, &s.state, edge, self.is_new);
+        drop(s);
+        self.edge_down = false;
+        self.edge_up = false;
+        self.is_new = false;
+        self.frame_dirty = false;
+        self.frame_has_motion = false;
+    }
+}
+
+impl Drop for VirtualPen {
+    fn drop(&mut self) {
+        self.stop.store(true, Ordering::Relaxed);
+        if let Some(h) = self.refresher.take() {
+            let _ = h.join();
+        }
+        // The device itself dies with `shared` (Device::drop) — Windows releases any held
+        // in-range/contact state when the synthetic device is destroyed.
+    }
+}
+
+/// Build + inject one pen frame from tracked state. `edge` is DOWN/UP/UPDATE;
+/// `INRANGE`/`INCONTACT` derive from the state itself.
+fn inject_pen(dev: &Device, st: &PenState, edge: POINTER_FLAGS, is_new: bool) {
+    let mut flags = edge;
+    if st.in_range {
+        flags |= POINTER_FLAG_INRANGE;
+    }
+    if st.touching {
+        flags |= POINTER_FLAG_INCONTACT | POINTER_FLAG_FIRSTBUTTON;
+    }
+    if is_new {
+        flags |= POINTER_FLAG_NEW;
+    }
+    let mut pen_flags = PEN_FLAG_NONE;
+    if st.barrel {
+        pen_flags |= PEN_FLAG_BARREL;
+    }
+    if st.eraser {
+        pen_flags |= PEN_FLAG_INVERTED;
+        if st.touching {
+            pen_flags |= PEN_FLAG_ERASER;
+        }
+    }
+    let mut pen_mask = PEN_MASK_PRESSURE;
+    // Contact needs a nonzero pressure to ink; hover reports 0 (Windows convention).
+    let pressure = if st.touching {
+        ((st.pressure as u32 * WIN_PEN_PRESSURE_MAX) / u16::MAX as u32).max(1)
+    } else {
+        0
+    };
+    let (mut tilt_x, mut tilt_y) = (0i32, 0i32);
+    if st.tilt_deg != PEN_TILT_UNKNOWN && st.azimuth_deg != PEN_ANGLE_UNKNOWN {
+        let az = (st.azimuth_deg as f32).to_radians();
+        let tilt = st.tilt_deg as f32;
+        tilt_x = (tilt * az.sin()).round() as i32;
+        tilt_y = (-tilt * az.cos()).round() as i32;
+        pen_mask |= PEN_MASK_TILT_X | PEN_MASK_TILT_Y;
+    }
+    let mut rotation = 0u32;
+    if st.roll_deg != PEN_ANGLE_UNKNOWN {
+        rotation = (st.roll_deg % 360) as u32;
+        pen_mask |= PEN_MASK_ROTATION;
+    }
+    let pt = to_screen(st.x, st.y);
+    let info = POINTER_TYPE_INFO {
+        r#type: PT_PEN,
+        Anonymous: POINTER_TYPE_INFO_0 {
+            penInfo: POINTER_PEN_INFO {
+                pointerInfo: POINTER_INFO {
+                    pointerType: PT_PEN,
+                    pointerId: 0,
+                    pointerFlags: flags,
+                    ptPixelLocation: pt,
+                    ptPixelLocationRaw: pt,
+                    ..Default::default()
+                },
+                penFlags: pen_flags,
+                penMask: pen_mask,
+                pressure,
+                rotation,
+                tiltX: tilt_x,
+                tiltY: tilt_y,
+            },
+        },
+    };
+    // SAFETY: `dev.0` is the live device this wrapper owns; the one-element array is a live
+    // stack value the call only reads. Best-effort like every injector write — a transient
+    // failure (desktop switch) is healed by the next refresh tick re-asserting state.
+    if let Err(e) = unsafe { InjectSyntheticPointerInput(dev.0, &[info]) } {
+        tracing::trace!(error = %e, "pen inject failed (transient)");
+    }
+}
+
+/// One live wire-touch contact.
+#[derive(Clone, Copy)]
+struct Contact {
+    id: u32,
+    x: f32,
+    y: f32,
+}
+
+/// Windows can inject at most this many simultaneous synthetic touch contacts.
+const MAX_CONTACTS: usize = 10;
+
+struct TouchShared {
+    dev: Device,
+    contacts: Vec<Contact>,
+}
+
+/// The `PT_TOUCH` device servicing wire `TouchDown/Move/Up` events — closes the SendInput
+/// touch no-op. Contacts are keyed by the wire's finger id; every frame re-injects the FULL
+/// active set (the synthetic-pointer contract), and a refresh thread re-asserts held contacts
+/// against the ~100 ms staleness auto-lift.
+pub struct SyntheticTouch {
+    shared: Arc<Mutex<TouchShared>>,
+    stop: Arc<AtomicBool>,
+    refresher: Option<std::thread::JoinHandle<()>>,
+}
+
+impl SyntheticTouch {
+    pub fn create() -> Result<SyntheticTouch> {
+        // SAFETY: FFI create with by-value args; the handle's sole owner becomes `Device`.
+        let dev = unsafe {
+            CreateSyntheticPointerDevice(PT_TOUCH, MAX_CONTACTS as u32, POINTER_FEEDBACK_DEFAULT)
+        }
+        .context("CreateSyntheticPointerDevice(PT_TOUCH) — needs Windows 10 1809+")?;
+        let shared = Arc::new(Mutex::new(TouchShared {
+            dev: Device(dev),
+            contacts: Vec::new(),
+        }));
+        let stop = Arc::new(AtomicBool::new(false));
+        let refresher = {
+            let shared = Arc::clone(&shared);
+            let stop = Arc::clone(&stop);
+            std::thread::Builder::new()
+                .name("pf-touch-refresh".into())
+                .spawn(move || {
+                    while !stop.load(Ordering::Relaxed) {
+                        std::thread::sleep(std::time::Duration::from_millis(REFRESH_MS));
+                        let s = shared.lock().unwrap();
+                        if !s.contacts.is_empty() {
+                            inject_touch_frame(&s.dev, &s.contacts, None);
+                        }
+                    }
+                })
+                .context("spawn touch refresh thread")?
+        };
+        tracing::info!("virtual touchscreen created (Windows synthetic pointer, PT_TOUCH)");
+        Ok(SyntheticTouch {
+            shared,
+            stop,
+            refresher: Some(refresher),
+        })
+    }
+
+    /// Apply one wire touch event (`code` = finger id, pixel x/y against the
+    /// `flags = (w << 16) | h` reference extent, exactly like `MouseMoveAbs`).
+    pub fn apply(&mut self, ev: &InputEvent) {
+        let (w, h) = ((ev.flags >> 16) as f32, (ev.flags & 0xFFFF) as f32);
+        if (w < 1.0 || h < 1.0) && ev.kind != InputKind::TouchUp {
+            return; // the documented zero-extent drop, as for MouseMoveAbs
+        }
+        let (x, y) = (ev.x as f32 / w.max(1.0), ev.y as f32 / h.max(1.0));
+        let mut s = self.shared.lock().unwrap();
+        match ev.kind {
+            InputKind::TouchDown => {
+                match s.contacts.iter().position(|c| c.id == ev.code) {
+                    Some(i) => (s.contacts[i].x, s.contacts[i].y) = (x, y),
+                    None if s.contacts.len() < MAX_CONTACTS => {
+                        s.contacts.push(Contact { id: ev.code, x, y })
+                    }
+                    None => return, // beyond the platform max — drop, never evict a live finger
+                }
+                inject_touch_frame(&s.dev, &s.contacts, Some((ev.code, POINTER_FLAG_DOWN)));
+            }
+            InputKind::TouchMove => {
+                match s.contacts.iter().position(|c| c.id == ev.code) {
+                    Some(i) => {
+                        (s.contacts[i].x, s.contacts[i].y) = (x, y);
+                        inject_touch_frame(&s.dev, &s.contacts, None);
+                    }
+                    // A move for an unknown id (its DOWN was dropped/lost): synthesize the
+                    // contact so the stroke self-heals, like the pen plane does.
+                    None if s.contacts.len() < MAX_CONTACTS => {
+                        s.contacts.push(Contact { id: ev.code, x, y });
+                        inject_touch_frame(&s.dev, &s.contacts, Some((ev.code, POINTER_FLAG_DOWN)));
+                    }
+                    None => {}
+                }
+            }
+            InputKind::TouchUp => {
+                let Some(idx) = s.contacts.iter().position(|c| c.id == ev.code) else {
+                    return;
+                };
+                // The UP frame still carries the lifting contact (with UP flags), then it
+                // leaves the active set.
+                inject_touch_frame(&s.dev, &s.contacts, Some((ev.code, POINTER_FLAG_UP)));
+                s.contacts.remove(idx);
+            }
+            _ => {}
+        }
+    }
+}
+
+impl Drop for SyntheticTouch {
+    fn drop(&mut self) {
+        self.stop.store(true, Ordering::Relaxed);
+        if let Some(h) = self.refresher.take() {
+            let _ = h.join();
+        }
+    }
+}
+
+/// Inject the full active-contact frame; `edge` marks one contact's DOWN/UP transition
+/// (everyone else is a held UPDATE).
+fn inject_touch_frame(dev: &Device, contacts: &[Contact], edge: Option<(u32, POINTER_FLAGS)>) {
+    if contacts.is_empty() {
+        return;
+    }
+    let mut frame: Vec<POINTER_TYPE_INFO> = Vec::with_capacity(contacts.len());
+    for c in contacts {
+        let mut flags = POINTER_FLAG_INRANGE | POINTER_FLAG_INCONTACT | POINTER_FLAG_UPDATE;
+        if let Some((id, e)) = edge {
+            if id == c.id {
+                if e == POINTER_FLAG_DOWN {
+                    flags = POINTER_FLAG_INRANGE | POINTER_FLAG_INCONTACT | POINTER_FLAG_DOWN;
+                } else if e == POINTER_FLAG_UP {
+                    flags = POINTER_FLAG_UP; // contact + range end together
+                }
+            }
+        }
+        let pt = to_screen(c.x, c.y);
+        frame.push(POINTER_TYPE_INFO {
+            r#type: PT_TOUCH,
+            Anonymous: POINTER_TYPE_INFO_0 {
+                touchInfo: POINTER_TOUCH_INFO {
+                    pointerInfo: POINTER_INFO {
+                        pointerType: PT_TOUCH,
+                        pointerId: c.id,
+                        pointerFlags: flags,
+                        ptPixelLocation: pt,
+                        ptPixelLocationRaw: pt,
+                        ..Default::default()
+                    },
+                    touchFlags: TOUCH_FLAG_NONE,
+                    touchMask: TOUCH_MASK_NONE,
+                    ..Default::default()
+                },
+            },
+        });
+    }
+    // SAFETY: `dev.0` is the live owned device; `frame` is a live Vec the call only reads.
+    // Best-effort — a transient failure heals on the next event/refresh re-assertion.
+    if let Err(e) = unsafe { InjectSyntheticPointerInput(dev.0, &frame) } {
+        tracing::trace!(error = %e, "touch inject failed (transient)");
+    }
+}

crates/pf-inject/src/inject/windows/sendinput.rs

@@ -46,6 +46,11 @@ const XBUTTON2: u32 = 0x0002;
 
 pub struct SendInputInjector {
     desktop: Option<HDESK>,
+    /// PT_TOUCH synthetic device, created on the first wire-touch event (a session that never
+    /// touches never creates one). `None` after a failed create (pre-1809) — touch then stays
+    /// the historical no-op.
+    touch: Option<crate::pen::SyntheticTouch>,
+    touch_failed: bool,
 }
 
 // SAFETY: `SendInputInjector` holds only an `Option<HDESK>` (a desktop handle). The host creates
@@ -58,7 +63,11 @@ unsafe impl Send for SendInputInjector {}
 
 impl SendInputInjector {
     pub fn open() -> Result<Self> {
-        let mut me = Self { desktop: None };
+        let mut me = Self {
+            desktop: None,
+            touch: None,
+            touch_failed: false,
+        };
         me.reattach_input_desktop(); // best-effort
         tracing::info!("SendInput injector ready (Win32 KeyboardAndMouse)");
         Ok(me)
@@ -324,15 +333,33 @@ impl InputInjector for SendInputInjector {
                 }
                 self.send(&inputs)
             }
-            // Gamepad goes through the XUSB backend. Touch: no SendInput equivalent -> no-op.
+            // Gamepad goes through the XUSB backend.
             InputKind::GamepadButton
             | InputKind::GamepadAxis
             | InputKind::GamepadState
             | InputKind::GamepadRemove
-            | InputKind::GamepadArrival
+            | InputKind::GamepadArrival => Ok(()),
-            | InputKind::TouchDown
+            // Wire touch → the PT_TOUCH synthetic pointer device (design/pen-tablet-input.md
-            | InputKind::TouchMove
+            // §6; closes the historical SendInput no-op). Lazily created — a session that never
-            | InputKind::TouchUp => Ok(()),
+            // touches never creates one; a pre-1809 create failure latches back to the no-op.
+            InputKind::TouchDown | InputKind::TouchMove | InputKind::TouchUp => {
+                if self.touch.is_none() && !self.touch_failed {
+                    match crate::pen::SyntheticTouch::create() {
+                        Ok(t) => self.touch = Some(t),
+                        Err(e) => {
+                            self.touch_failed = true;
+                            tracing::warn!(
+                                error = %format!("{e:#}"),
+                                "touch: synthetic pointer unavailable — wire touch stays a no-op"
+                            );
+                        }
+                    }
+                }
+                if let Some(t) = self.touch.as_mut() {
+                    t.apply(event);
+                }
+                Ok(())
+            }
         }
     }
 }

crates/pf-inject/src/lib.rs

@@ -223,8 +223,20 @@ pub fn pen_supported() -> bool {
     true
 }
 
-/// See the Linux variant — no pen injection off Linux yet (Windows PT_PEN is design P3).
+/// Windows: pen (and touch) inject via synthetic pointer devices — available on Win10 1809+,
-#[cfg(not(target_os = "linux"))]
+/// probed by actually creating (and immediately destroying) a PT_PEN device. Same
+/// `PUNKTFUNK_PEN=0` kill-switch as Linux. The probe result also stands in for PT_TOUCH
+/// (both APIs arrived together in 1809).
+#[cfg(target_os = "windows")]
+pub fn pen_supported() -> bool {
+    if std::env::var("PUNKTFUNK_PEN").as_deref() == Ok("0") {
+        return false;
+    }
+    pen::synthetic_pen_available()
+}
+
+/// See the Linux/Windows variants — no pen injection elsewhere.
+#[cfg(not(any(target_os = "linux", target_os = "windows")))]
 pub fn pen_supported() -> bool {
     false
 }
@@ -399,9 +411,15 @@ pub mod gamepad {
 #[cfg(target_os = "linux")]
 #[path = "inject/linux/pen.rs"]
 pub mod pen;
-/// Stub — pen injection needs the Linux uinput tablet (Windows PT_PEN is design P3);
+/// Windows: PT_PEN/PT_TOUCH synthetic pointer devices (design/pen-tablet-input.md §6).
+/// `pen::VirtualPen` here is the PT_PEN device; `pen::SyntheticTouch` backs the SendInput
+/// injector's wire-touch path.
+#[cfg(target_os = "windows")]
+#[path = "inject/windows/pointer_windows.rs"]
+pub mod pen;
+/// Stub — pen injection needs the Linux uinput tablet or Windows synthetic pointers;
 /// `pen_supported()` is false here, so no host advertises the cap and no batches arrive.
-#[cfg(not(target_os = "linux"))]
+#[cfg(not(any(target_os = "linux", target_os = "windows")))]
 pub mod pen {
     use anyhow::{bail, Result};
     pub struct VirtualPen;