forked from unom/punktfunk
enricobuehler
ef40890c80
The AV1 arm of the native D3D11VA rung, parity-required because today's FFmpeg d3d11va rung already decodes AV1 Profile 0 and the excision must not silently drop it. Pin-only, as that rung is today. decode() walks the temporal unit frame by frame; submit() splits into decode_into and present, because AV1 decodes frames that are never shown. The proven H.264/H.265 body is byte-for-byte unchanged — review diffed it against HEAD mechanically and found only a rename plus one refusal arm — and the VideoProcessorBlt hand-off is untouched. That mattered more than anything else here: those two codecs are hardware-proven, .173 is powered off, and no gate that runs could have caught a regression in them. Every descriptor value comes from libavcodec's dxva2_av1.c read verbatim, not from symmetry with the other codecs: three buffers and no qmatrix (AV1 transmits none), NumMBsInBuffer zero on all three, ConfigBitstreamRaw 1, surface alignment 128, pool +8, and the session sized from the SEQUENCE header's max frame size — sizing from the frame would rebuild the decoder and drop every reference the first time a stream legally resized downward. Two places where following the H.264/HEVC pattern would have been wrong. libav pads the bitstream buffer and grows only its descriptor's DataSize, never a tile's, because a tile's size is exact — charging padding to the last record is corruption, not filler. And the committed tile records were one per tile GROUP spanning the whole OBU, header and frame header included, where libav emits one per TILE addressing the payload past its tile_size_minus_1; the vendored vector is single-tile, so the old tests passed either way. Review then found four more defects in the already-committed conversion, each confirmed against libavcodec AND Chromium's D3D11 AV1 accelerator: Tile widths and heights were the coded minus-1 where the field is a superblock COUNT — every tile declared one superblock short, on every frame, with a comment asserting the opposite of the truth. StatusReportFeedbackNumber must be zero for AV1. Both reference implementations disable it specifically for this codec — libav's note reads "breaks decoding on some drivers (tested on NVIDIA 457.09)", Chromium's "it crashes :|" — while both set it for H.264 and HEVC, which is why this rung's proven codecs never showed it. It would likely have presented as a hang or a rejected submission rather than bad pixels, sending the next session after the tile records instead. frame_refs[].Index is an index INTO RefFrameMapTextureIndex, not a surface index; the neighbouring line already filled that map correctly. Measured: 1636 reference entries on the vendored vector where the two differ. qm_y/u/v need the 0xFF "no matrix" sentinel — 0 is a valid matrix index, and 274 of 274 frames transmit no quantiser matrix, so every one was being dequantized against matrix 0. Also closed: the slot leak the Vulkan rung had already found and documented (a frame refreshing no slot is never reported removed, so nine of them exhaust the ledger); a tile-grid check that could not fire, replaced with libav's own cols*rows guard; per-reference sizes now taken from the reference's own header via RefState rather than the current frame's; and the render size clamped against the decoded picture in both rungs, since AV1 permits a render size larger than the frame. The parity leg was rewired through the real decode path — it previously called the internals directly, so its hidden-frame assertion described the harness's own counter rather than production withholding anything. Gates: macOS fmt/clippy/383 tests, container clippy -D warnings over four crates and 499 tests, and on Windows .133 (.173 is powered off) clean checks plus 97 pf-dxvadec tests. All 8 Vulkan gpu_parity legs re-verified bit-exact on the RTX 5070 Ti after the shared-code change. No AV1 frame has been decoded through this rung anywhere: it needs .173 back.