forked from unom/punktfunk
enricobuehler
50b3fd1012
WP1.3, and the measurement that justifies it. `resolve_split_mode`'s 10-bit rule sat ABOVE the pixel-rate arm and took no codec, so it (D1) vetoed 10-bit 4K120 -- the very case the pixel-rate arm exists for -- and (D2) applied an HEVC-Main10-on- Ada result to AV1 10-bit, which has no such measurement. Both fixed: the pixel-rate arm now comes first, and what remains is codec-scoped to HEVC and only applies BELOW that bar, where a second engine buys nothing anyway. The rule rested on one datapoint: 5120x1440@240 Main10 on Ada, forced-2 7.6 ms vs 2.8 ms single-engine -- split 2.7x SLOWER. Dropping the short circuit flips that exact configuration's behaviour, so it was re-measured on a 4090 (AD102, driver 610.43.03), 400 Mbps, sub-frame pinned off, via a new mode-parameterizable Main10 A/B test (PF_AB_MODE=WxHxFPS reproduces the original operating point). Ada 4090 single forced-2 ratio 3840x2160@60 4483 us 2178 us 2.06x split WINS 5120x1440@240 3689 us 2813 us 1.31x split WINS <- the veto's origin 3840x2160@120 4148 us 2189 us 1.89x split WINS Blackwell 5070 Ti 3840x2160@60 4216 us 2477 us 1.70x split WINS 5120x1440@240 4651 us 3894 us 1.19x split WINS Split wins for Main10 at every mode on BOTH architectures, including the config the veto came from. The original number does not reproduce. ⚠ Caveats, unchanged from the rest of this work: content is trivial (297-300 B/AU against an 833 KB CBR quota -- zeroed VRAM), so this is the pixel-proportional term and the bits/frame regime is still unmeasured; debug build; and the driver differs from whenever the original was taken. Also validated on Ada in the same session -- the whole spike set reproduces on a SECOND architecture and an OLDER driver (610.43.03 vs 610.57.04): S1a in-place split switch accepted with zero IDRs both directions; S1b takes effect (|C-B|=12 vs |C-A|=1921, the cleanest run yet); S1c pair flip passes; D5 confirmed (AUTO+sub-frame 4424 vs DISABLE 4409, 15 us apart -- and AUTO without sub-frame 2310 ~= TWO_FORCED 2314, so the arm stays); engines=2 with THREE_FORCED correctly clamped to mode 2; arbitration converged with exactly 1 keyframe. Verified: .21 clippy -D warnings clean + 64 unit tests; .133 Windows clippy -D warnings clean (the resolver signature grew a `codec` param, so both backends moved); Ada + Blackwell on-hardware as above. fmt clean.